any one use the A500S with parking mode?
i have install it on Peugeot by using 2x piggy back fuse attach direct to fuse box with hardwire kit. i able to enable parking mode.....
but it a bit strange.... after i turn off the engine.... the unit keep recording (green light still on)
other than this issue... it drain my car battery
btw i install by myself.....
anyone tested the unit with parking mode?

how the parking mode work?

what is biggest size supported microsd card?
128gb...
anyone have tested 256gb?

[QUOTE]

did the a500s will notified when it enter parking mode?


other dashcam....
it will saying parking mode when the engine cut off.
the system will monitor but not save video accept been trigger by g sensor or sound sensor.

I have sorted out my issue....
The hardwire cable is not properly connected to piggy back fuse. So maybe power not stable or etc.
Now I have use direct cut and join wire to piggy back fuse.

Vcc to fuse have constant 12v regardless engine ON or off.
ACC to fuse only have 12v when engine turn On.
Btw... My peugeot have have something weird ON and OFF 12v condition for fuse tapping.

For parking surveillance.... After engine off... I think about 1m the device is said enter to surveillance mode in 5m. At that point the a500s is OFF.

About the firmware .... What are the latest version?
Mine is running on 0.0.34ww dated 2021-01-22

The a500s I found out have issue on sensitivity to trigger parking mode recording... After it in parking mode (10-15m later) ... I shake my car..... It not triggering recording. Setting been set to high sensitivity.

Anyone one have try the unit with bigger cap than 128gb mSD ??? Before I purchase this coming raya? 5/5 promo

there is a firmware update for
A500S 1.0.6ww

check it out