been super many years never post here.
since MCO got time to play a while


did this cooling mod to my workstation, to bring down GC and NVME temperatures
NVME was going at 50°C at idle, gotta do something

GC making annoying sound, fan doesnt run below 57°C, suddenly it will kick in and bring down the temperatures back down to 50°C.
so that thing will spin fast and slow a few times in an hour.


this blower fan is quite powerful, so i mod it to run at USB 5V instead of 12V.
use the air to directly cool the NVME without any heatsink



taped this side to cover the conductive metal side since sandwich it between heatsink and GC.




put there in between GC and CPU heatsink to blow directly onto NVME.
do note that whatever normal fan is super hard to fit and the pressure not strong enough, only blower type will do its job well








GC originally looks like this



stripped down everything, then slap a 120mm fan on it. i used glue gun to stick the fan onto the fan shroud








results are quite good, NVME now runs same temperature as traditional HDD.

i tried sticking tiny heatsinks on NVME but doesnt work great, only an active cooling can do its job
even GC dont make whiny noise when full load during gaming



This post has been edited by AllnGap: Jun 2 2020, 04:34 PM

I'm running 15browsers at once.
Temperature about 43 only, before that it's 50
If on AC about 39

Not noisy at all cuz that fan below 2500rpm

MCO tangan gatal

WTF ! all still working after 12years !!