The real Aztech brand is Aztech with the following logos, not Az-tech...

i also get this modem router frm tm, but why i cant access it with 192.168.1.1?

Check your ip , sometimes it will use 192.168.0.1 .....etc..

.

This post has been edited by Tiru92: Jun 9 2020, 03:35 AM

I used to own Aztech modems during the ADSL era, damn lousy webgui interface and firmware.
If you oftenly tinker with the settings, commit and save them the modems bricks very easily.

Eventually moved to better brands such as the Singaporean Prolink brand, Zyxel and TP-Link. This brand eventually forgotten.

Nowadays Aztech more into home consumer electrical products such as kitchen appliances and robot vacuum cleaners.

anybody know how to change dns in this router?

Easy Setup >
WAN Configuration >
User Name : ********@unifi
Password : PPoe (need to call TM 100 and ask the PPoe number)
-------
Wireless Setting >
SSID: (create the wifi name) @ unifi
encryption: WPA2
Shared Key : (create your new wifi password)
Apply Change
(Done)

Use tmadmin as username
and Admn@xxxx from your mac address for password

today just move my nex.life to unifi and receive this piece of junk
WTH

Got, but need use command line sometimes to adjust, or reflash other firmware (beware may damage)

Anyone know how to bridge this router?

OMG GOT THIS SHITTY ROUTER TOO!

Can you please take a screenshot under firewall tab pleaseee....

Got this router too! Has anyone tried to set up this router with VPN?

Also, if I were to replace this with another router, any suggestions on which one to go with? (I'm on the 30Mbps plan)

Thanks!

TM usually will downgrade the login user ID, "admin" to user mode and create another admin level user ID as "operator".

for example:
Username: Management
Password: TestingR2

Username : operator
Password : h566UniFi

Username : operator
Password : telekom

Some routers are using "tmadmin" as their username but password is according to the mac address of that router.
for example,
Username: tmadmin
Password: Adm@XXXX

XXXX is the last 4 digits of your router MAC address.

try tmadmin, password is Adm@xxxx (last 4 digits of your router MAC address)

Do you know how to get Mac address? Login with your tmuser to check first, usually will showing something like this,

example


Assume your last 4 digits is 1919, same like the Usr@1919, just login as,
username: tmadmin
password: Adm@1919

This post has been edited by junclj: Jun 24 2020, 09:38 AM

Been using this model for a week, the range seem less compared to previous D-Link AC1200 router, difficulty in getting connected downstairs, router is upstairs

hi all,
this model how to check how many device connected?

Maybe there's a administrator login

Try it out

tmadmin
Adm@xxxx (MAC address last 4 number)

Usually tm will have such login credential normally on the past router


Attached thumbnail(s)

TM technician came and install this router to replace my DLink AC1200. Wifi strength improve alot compared to my DLink.

Funny thing is that he tested on his laptop the speed is around 500mbps but when i test on my PC using LAN showing connected at 1GBPS only able to reach 350 in speedtest. He said is my device problem. The END. alah.

other problem is Now my network device (Yamaha network CD player) cant be seen in network drive.

Anyone any advice?