i dun think there is option to change the CR in the bios...r u sure it is the ram coz the ram is rated at DDR2 667 and u r running it at 667...wont boot means what...after u changed the fsb, save n exit, nothing happened or it just keep on cycling on and off?as mentioned by ace, have u tried up the vcore a bit... i mean higher than the default?

good going bro. have u tried the max this baby can go?

i think ur cpu might need more juice...u can either up ur vcore or lower down a bit the oc...and see how.
the blend test (if i'm right) is to test both the cpu and ddr at the same time with the same FFT length...the big one is mainly targeted for ddr and small one mainly targeted for the cpu...but the blend test will run either small or big on both the cpu and ddr...so, i guess if u got the error at 8k, might be the cpu is the culprit...so, my best bet is ur cpu lah...

This post has been edited by remysix: Nov 13 2007, 02:07 PM

yup, totally the heat...
when u said stable under aircond...how long is that?

good going bro...i've done mine about a month ago...but sadly not much improvement...around 1-2c only on idle but on load, boleh tahan - didnt remember how 'tahan' was it. dunno issit due to my proc and cpu block not 'friendly' enuff or what.

he's till in the testing phase...so testing how high the proc can go with hi multiplier and low fsb...once he knows his proc capability, he can tune to the best setting prolly like the one u mentioned or higher...

dun really get it

not really...we just chat around about gals

i wonder how long would that be b4 u got the other mobo

that looks yummy
bro..make us drool more with the screenie and btw, where did u get ur E8400?

This post has been edited by remysix: Jan 14 2008, 05:29 PM

i also wanna know the price range and if there is any bulk on penryn...

not to mention that it's dangerous as well

erm...kind to share the shop name? or just a hint...

czone is out of stock edi...called them around 4pm...dunno when re-stock...
viewnet, havent call yet.

oic...didnt know that...thanks for the info bro...anyway, i just KIV changing the proc first...need to get a new mobo since my current mobo got problem wif running dual channel mode...gonna rma it and while waiting, gonna get myself either MARS or the DFI DK P35...which one should i go for...any hint?

i dunt think that ram can go at that speed with that voltage...u may need to up the voltage a bit but worst case, it wont do either.
btw,i'm using the same ram right now. bought them since my Crucial 10th Anni was sent for RMA - got back a pair of Ballistic from Crucial...damn!

dun know what actually happen...the max vdimm i used only 2.2v...and worst thing is, even my DQ6 now cannot do DC; whenever i put my module in DC mode, i will get error in memtest...but no error at all in SC...so, rmaed the Anni and once my DFI DK arrived, gonna rma my mobo plak...

u read me like a book la bro...
next is the GSKILL PC8000 F2-8000CL5D-4GBPQ

nice temp with such a vcore...btw, how tight can u set the memory?wanna know...

it's always 'limited'...if not, even if u fried ur chip, they still need to replace...if the model is no longer available, they will try to replace it with the similar model...not same but similar...like my Annie, came back Ballistic...coz Annie is sorta limited edition; so, they just replace it with similar model lah
i wonder

nice clock and vcore...i think we gonna see a lot more result like this on this 45nm proc...
btw, does the proc stable at that speed with that vcore?

nice clocking u got there with ur quaddy...why no temp screenie...wanna see how well does that cascade doing with that 4 cores running at that speed