congrat to those member who got their Fold 7 !

May I ask, is anyone here signup for Celcom Fold 7 plan, how is your status ?

I sign up on 10 July, and still no update until today.

(BTW, Celcom plan is quite attractive as well, RM6264 for 512GB model, plus a free Galaxy Watch8 (should be 40mm, bluetooth) (for my mobile plan)

Hi, is anyone here can tell me, is the Fold 7 is Dual Sim card slot ? Is the eSim also available (how many eSim?) ? As GSMarena mention there is 2 versions, both has Dual Sim slot but one has “Multiple eSim” ?

Thank you, I just received mine today, haven transfer from old phone to it yet. Thank you for your reply !

Seems like mines also got updated (but i did register using my wife old zflip3 last week).

But in setting, it did not reflect.

Since I also check in Samsung website to try buy Care+ it shown "already registered", so I think it is legit.


But may I know, what is the term and conditions for 3 years Csre+ ? Is it including accidentally damages ? How is the fees for each repair ?



Edited : * When check on support page, the warranty end on 2027 (only 2 years?)

Is the Samsung Care+ is (Samsung warranty = 2 years + accidentally damage 1 years ?)

Sorry, but I am confusing now. Even download the T&C from their website did not provide much clear info. And the T&C stated the Care+ is only 2 years maximum.

This post has been edited by PowerPC: Aug 8 2025, 03:25 PM

I see, my case only reflected in Ssmsung Member, but the support page show only 2 years warranty. The "About phone" page still show no Care+ coverage.

I remember soneone said is around RM5.2k on first day after deduct RM600 for storage upgrade (which Samsung removed on 2nd day)

Thank you very much !

Did you also register with old Z series, or auto enrolled ?

Oh, mean not every purchase got it. Yeah, I register using my wife ZFlip3 as well (luckily haven sell out yet)

Thank you very much.

Hi everyone (if any one is looking for a zFold7 case), here is what I got after trying few cases.

This is Nillkin Super Frosted, it got 2 version, 1 is with pen (just normal softpen) , 1 is without. When my first purchase I select the Pen series, but after few days found non-pen version from other seller so I return the pen version.



First, this case is very thin while still has good protection and good built quality, also it is cheap (about RM72+ after Shopee coupon). It also has hinge cover (with magnet inside to keep it close), and magsafe magnet at the back. You can put any magnetic attachments on it.

The front cover has pre-install adhesive tape, but I worried it will peal off my original anti-reflactive SP (purchase RM89 from Samsung, also, very good quality), I removed the adhesive tape.

It come with spare adhesive tape (blue area) so instead of put it on blue area, I use it on side, up, and bottom. (Red area, see pic).

When you unfold it, the hinge cover will "slide" the left portion of front cover and make it moving abit, thats why I remove the original position of the adhesive tape, if not it may peal off the screen protector. But if you don't apply any adhesive, the front cover will come off by the push of that hinge cover. After applied the adhesive, the front cover is very sturdy.

Then come to the stand, most of it I found was too thick or heavy, not holding on certain angle, but this little stand from Baseus (for only RM15) work perfectly while in small sizes and light weight. It also can use 4 style (portrait and landscape on both fold and unfolded, with some adjustments). Provided you stick the stand on the area that same as mine, it hold up very well.

With the stand stick on below position, not only it solve the "goyang" issue when on the table, it also don't block the wireless charging function, it can still charges wirelessly.

The thickness of this case is same as my previous S23 Ultra with transparent case. And the weight ? Just 10g more, included the Basues stand ! (Total 265grams total).

Above is my opinion. Thank you.













Link to purchase (not an affiliate link)

Nillkin case :
https://my.shp.ee/tHQCfBo

Basues stand :
https://my.shp.ee/1UhFhWd

This post has been edited by PowerPC: Aug 8 2025, 08:55 PM

I donno ? My last experience with care+ is back to Fold3, that come with only 1 year of protection.

Because when I check in Member support section, it did show the warranty end on 2027, thats why I am confused.

Same here, my Care+ show 2/08/2025 to 2/08/2028, support pages show : end on 31/07/2027.

I received the phone on 2/08/2025 (Celcom ships on 1/8/2025)

The care+ also included 1 time screen protector replacement per year as what i have read the terms and conditions

Did you try to contact them using email? I remember they quite rajin to reply email. Lol

Seems like some brand store are providing 20% discount for Fold 7 in Shopee?

Better deal than Pre-order right ?

The 256GB is selling RM5979, 512GB is RM6387.

This post has been edited by PowerPC: Aug 16 2025, 12:07 AM

True also, I feel lucky to be one of those who get the 3Y Care+. But the current discount of Fold 7 is quite attractive, I remember last year the Fold 6 have not so much discount, right ?

Do you try put up in Carousell ? I usually sell in there, few years already sold multiple device there. Meet all buyer are good and polite.

Hi, I assume you are mean the phone lay flat when unfold, am I right ?

To me, I just found that the Fold 7 actually like to be unfold, the screen will be flat and the hinge seems to be more "relax" during unfold. So, every night I let it unfold when charging overnight. I can see the screen is more flat and the hinge feel better.

Because I saw those demo Fold 7 at store has less visible crease, that because it stay unfold all the time. And I also observed the screen protector is very good quality even after some abuse within 2 months (see from those Demo phone in store). Even mines barely notice any scratches or dent after 2 months + using.

The inner screen is more durable than I expected, you can feel how sturdy especially when typing. Compare to other foldable, which I look them in store, their screen gone really bad sign like dent by finger's nail, peal off, and scratch everyehere.

Hi, I am the one using Nilkin Super Frosted (brought about RM78 at Shopee), Use it since 1st day own the Fold 7 (2 Aug 2025), this case fit nicely and most important is how slim it is with the hinge protection. Drop 2 times, the case and phone seems still fine. But the downside is the hinge is magnet type, so it will "glide" the hinge little bit so some area of the hinge may have hairline scratch after month or two but it is still better than naked without protection.

One thing well noted is, since the hinge "stick" itself when you folded by magnet inside the hinge protector cover and a top layer of plastic sticker, overtime the double seletape inside will become unstick and the magnet come out, lead to the hinge cover will not stick with the hinge.

Then, you can just fixe it with super glue that glue the magnet back into the hinge cover and then it will be fine. (I have glued both up and bottom after it come out, now over a month already, still stick good)

I have compare this case with other more expensive case like Spigen, this is cheaper and still has great protection. Most important is slim, most 360 protection case like Araree is very thick especially near the hinge cover joint.


Also, last note is the front cover, this case also has very accurate cutting design, so it fit very nice BUT, I change the adhesive stripe (included spare in box) from the left part to right bezel , upper part (near spearker grill) and lower part, so the left bezel is still flexible (moving), (please review the pictures below, I stick the adhesive in red color mark, the blue color mark has adhesive that factory installed, but I remove it)

WHY ?

Because I have Samsung Anti-Reflective screen protection installed, so if I put the adhesive near the left bezel of this cover, I afraid it will "stick" on the screen protector and later it peal off the screen protector since the bezel is so thin, it will move.

So, rather than put the adhesive there (it already put there when you got the case, but I remove it) I put all 3 side with adhesive (not plan to remove front case unless it spoil or want to remove SIM card) , if you often remove SIM card, you still need to open front cover, so I rather stick that 3 side to reduce the risk of being damage my screen protector.

Even the bezel seems flexible sometimes I grab the phone, it did not harm my screen protector, and the front cover fit nicely and firm even after 3 months of heavy used (the screen protector is full of scratch now).

I strongly recommend this cover.

https://pictr.com/image/xbScZj

https://pictr.com/image/xbSKpU

https://pictr.com/image/xbSXW9

https://pictr.com/image/xbSy2u

https://pictr.com/image/xbSe4l





This post has been edited by PowerPC: Nov 13 2025, 08:55 PM