Outline ·
[ Standard ] ·
Linear+
Wifi 5gzh & 2.4gzh, How to speed up the 2.4gzh
|
mztang52
|
Jan 10 2020, 04:27 PM
|
|
QUOTE(junclj @ Jan 10 2020, 04:22 PM) can stay 2.4GHz turn on for smart home IoT. As far as I know that Deco mesh system uses the same SSID for both 2.4Ghz and 5Ghz. So, if you want to enable 2.4Ghz then it will share the same WiFi name as the 5Ghz network. You can't set different SSID names for both 2.4Ghz and 5Ghz. This is what I know from my knowledge after I have played around with my Deco M5.
|
|
|
|
|
|
yongtjunkit
|
Jan 10 2020, 04:45 PM
|
|
QUOTE(mztang52 @ Jan 10 2020, 04:15 PM) Smart home IoT devices do not support 5ghz at the moment  Smart hone IOT don't need so much bandwidth to run......
|
|
|
|
|
|
mztang52
|
Jan 10 2020, 04:57 PM
|
|
QUOTE(yongtjunkit @ Jan 10 2020, 04:45 PM) Smart hone IOT don't need so much bandwidth to run...... Ok? So what's your point? I didn't say that Smart home IoT devices need a lot of bandwidth. Read up clearly.
|
|
|
|
|
|
junclj
|
Jan 10 2020, 05:39 PM
|
|
QUOTE(mztang52 @ Jan 10 2020, 04:27 PM) As far as I know that Deco mesh system uses the same SSID for both 2.4Ghz and 5Ghz. So, if you want to enable 2.4Ghz then it will share the same WiFi name as the 5Ghz network. You can't set different SSID names for both 2.4Ghz and 5Ghz. This is what I know from my knowledge after I have played around with my Deco M5. Actually my home RT-AC86U also do the same thing, my 2.4GHz and 5GHz was combined as smart connect. When I go far, my wifi speed will stay below 100mbps, when I go near to router, wifi speed stay above 100mbps.
|
|
|
|
|
|
mztang52
|
Jan 10 2020, 05:40 PM
|
|
QUOTE(junclj @ Jan 10 2020, 05:39 PM) Actually my home RT-AC86U also do the same thing, my 2.4GHz and 5GHz was combined as smart connect. When I go far, my wifi speed will stay below 100mbps, when I go near to router, wifi speed stay above 100mbps. Oh yea, speaking of Smart connect, can you help me out?  Cuz some of my phone doesn't seem to work well with the Smart connect though.
|
|
|
|
|