Jan 10 2020, 04:11 PM
QUOTE(halobozz @ Jan 8 2020, 06:58 PM)
hello all,
I had just subscript maxis home fiber optic 300mbps. The wifi 5Gzh is good with speed of 200 to 220 mbps. But the 2.4gzh is only between 30-50 mbps. (Tested the speed in the same manner, environment and device). How can I increase the speed because most of my devices at home like cctv, smart home, printer etc uses wifi 2.4gzh? I hv tried tweeking the channel to 1, 6 & 11 but not much diff in speed. Thanks
2.4GHz is hardly to get more than 100mbps. Mostly floating around 80~90mbps for the best results what I can get. It just good for wider coverage only. My suggestion is switch off all your routers 2.4GHz and turn 5GHz into mesh. I had just subscript maxis home fiber optic 300mbps. The wifi 5Gzh is good with speed of 200 to 220 mbps. But the 2.4gzh is only between 30-50 mbps. (Tested the speed in the same manner, environment and device). How can I increase the speed because most of my devices at home like cctv, smart home, printer etc uses wifi 2.4gzh? I hv tried tweeking the channel to 1, 6 & 11 but not much diff in speed. Thanks
Get a set of mesh router such like TP-Link Deco M9 Plus (RM1,269)
https://shopee.com.my/TP-LINK-Deco-M9-Plus-...0984.1750500485
or Aimesh for Asus router.
So now you can totally switch off the 2.4GHz channel, then use your mesh wifi set to spread out the 5GHz wifi around every corners of your house.
Don't ask me why so expensive because last time people blame that Malaysia internet is slow and expensive. When internet slow, our routers requirement is low. That's why you can't feel the different between 2.4GHz and 5GHz. When internet is fast (thanks to our minister), Unifi and Maxis been turboed up to 800mbps. Everybody start to buy expensive routers, need to build mesh system for big family. Budget for more than RM1,000, it's normal.
This post has been edited by junclj: Jan 10 2020, 04:22 PM
Quote
0.0161sec
0.78
7 queries
GZIP Disabled