Keyboard, windows+b

Sorry fpr missing out the details.

1. This is extra box stb i use upstairs. So i use with the unifitv tablet apk

2. When use wifi it works well. But if i connect data lan cable port 1 - 3. The unifi app have channel but when click channel it become blank .

3. But if i disconnect lan data cable. And use wifi
All channel function

Anybody know how to solve this? It happen after I switch to 50mbps package

This post has been edited by annoymous1234: Oct 19 2019, 01:10 PM

Usually when this appear, just select a device to remove then can sign in new device. But your list seems blank and it shows zero devices limit. So it seems either you no longer have access to playTV or there is something wrong with your account.

This post has been edited by AV_2018: Oct 19 2019, 01:18 PM

Tq.. I ll try

Funny thing is I can watch from their own white hypp tv box. Only through apps cannot.

Looks like you have to contact TM.

You have switched your Unifi package, maybe you need to doublecheck your UnifiTV ID & Password, probably changed.

playtv app, got 2 option devices connection:-

1) only 2 device can do connection same time

or

2) only 5 devices can do connection same time


try to logout the device, or just force connection by bumping out the other devices that you don't need.

can unifi playtv on android phone/tab play on the tv by using screen mirroring function?

No, blocked.

Hi, my unifi tv box Malaysia chanel is ok eg 108, 103.. but other is lagging. eg 201.. anyone hv this problem?

It doesn't have built-in casting. If use Miracast or Google cast, only certain channels like TV1 works. The others will appear 'playback error due to output blocking' even though the TV's Miracast supports HDCP.

What do you mean by lagging? If you mean framerate not smooth it may be due to framerate mismatch - some countries use 60Hz rate while Malaysia broadcast uses 50Hz rate.

This post has been edited by AV_2018: Oct 21 2019, 03:29 PM

Hmm... I thought Unifi TV channels only use 30 fps while Astro uses 50 fps.

Try to reboot all of the equipments (Modem, Wifi router and the STB) and check again.

If the channels really use 30FPS then there will really be framerate mismatch because the STB by default outputs at 25FPS/50Hz.

Here's the Unifi TV STB upgrade server IP in case anyone with older firmware need it.

STB in Unifi mode and connected to VLAN600:
10.0.194.158:8082

STB in Streamyx mode and connected to Internet:
210.187.19.170:8082

Need http:// infront of the address.
Take note after upgrade to latest or second latest firmware no longer can edit the server address.

This post has been edited by AV_2018: Oct 21 2019, 07:26 PM

What if its been greyed out?

As far as I know it is greyed out on second latest as well as latest firmwares. In that case it should be the correct address based on the STB mode that is set (Unifi/Streamyx toggle). Make sure STB is connected to correct router port for the respective mode and the STB should auto upgrade when it's your turn to get the upgrade. For Unifi mode it has to be connected to VLAN600 network (usually port 4 on router) as the upgrade IP is 10.xx which is a private IP that's only accessible from within the IPTV network.

19 oct- 3 november, unifi tv open all premium channel for all subcribers.