Greetings All,

Booked a silver Bezza Gxtra 1.0 last week.
I have included the Gear Up hood & door insulation in the order.
I plan to do the following once I receive the car:

1. Ultra Racing Stage 1. (UR Hq quoted RM721 & Jooi Seng Klang quoted RM580. Both inclusive of installation)
2. Armrest (any recomendations of good ones?)
3. Boot tray (cheapest possible for bezza size)
4. Wrap steering (any recommendations of freelancers that can come at my location to do it? Bukit Jelutong area). Or maybe just a steering cover from shopee (any recommendations?)
5. Thickest coilmat possible (found 22mm at coilmat.com)
6. Smartphone holder (any recommendations? want most durable)
7. Smart tag dashboard holder (found some at shopee)
8. Sun visor organizer (any recommendations of good ones?)
9. Cubby hole/storage rubber mats (found one at shopee)
10. Trunk lifter spring (found one at shopee)

What do you guys think? Any thoughts, advice or recommendations?

1. Where did you get Stage 1 installed? Was there any significant difference at highway up to what speed? How fast can you corner with confidence after installing them?
2. Noted
3. Ok
4. Will do, just heard a youtube reviewer (autophiles) saying the gxtra steering feels like sandpaper
5. Will check on trapo. Reason for me considering the thickest car mat available is to insulate the sound and vibration coming from below (if there is any)
6. Ok
7. Ok
8. Ok.
9. Rubber mats for the cubby holes to avoid rattling noise if put loose small items.
10. Search google: "Car Trunk Boot Lid lifting Spring Device" to see what it is.

Thanks for your input mate. Much appreciated.

where is this lzd shop?

engine air filter is just RM50+? I remember i read it something like in hundreds?

yaya, and bezza 1.3 filter is the most pricey filter in perodua line up, the new myvi that uses the same engine and the air filter is just 62.90 excludes labour, indeed myvi air filter casing is different from bezza's

For 1.3? The filter yellow or white colour?

The original filter is yellow/orange with Daihatsu logo and Denso brand. Made in Indonesia.

The original filter is yellow/orange with Daihatsu logo and Denso brand. Made in Indonesia.

this is the aircond air filter?

who is carput? good to have the contact just in case my car battery die off..

anyone has seen the limited edition bezza that just revealed?

<a href='https://<link removed>/2019/04/11/perodua-bezza-limited-edition-launched-rm44890/' target='_blank'>https://<link removed>/2019/04/11/perodua-bezz...unched-rm44890/</a>

Paultan

i do have a different practice.

1. Full Stop.
2. Shift to N (Leg Brakes ON).
3. Pull up the handbrake (Leg Brakes ON).
4. Leg Brakes OFF.
5. Confirm vehicle not moving.
6. Shift to P.

Engine off will happen either after step 6 or before step 6. But for Bezza, i do it after step 6 because the engine is not fully Off when it is not in P shift.

What is the recommended tyre pressure for Bezza? If follow factory is 36psi. Not bumpy meh?

Not true unless one personally experience this. I'm on 35 PSI for almost 3 years already, tyres clocked 32k km.. all evenly wear.

1 pair of 195/50R15, 1 pair of 195/55R15. Kumho Escta PS31. I pumped 35Psi due to soft sidewall. There's no one size fits all. If you noticed @ 35 psi and experience abnormal wear then adjust accordingly.
Ultimately driver knows best. Just be aware that the tyre load will correspond with the pressure applied and tyre handling characteristics will also be affected by pressure. Cheers.

Originally bought 195/50R15 on 15 x 7JJ ET35. Rubbing at rear fender when loaded with 2 pax at rear. Changed to 15 x 6.5JJ ET35 with same tyres, no rubbing at the rear fender. 
3 mths later 1 tyre suffered punctured, did internal patch, 2 mths later same tyre another puncture about 10 inches away from first puncture.
Decided to replace 1 pair and try going with 195/55R15 fitted at the rear. Slight rubbing at rear fender only when rear full load and going over hump/hole.
So now 195/55R15 in front, 195/50R15 at the rear.

Perfect setup will be 195/55R15 with 6.5JJ + ET38..
With this s setup the wheel arc will look nicer.