around what budget can get best mobo??

o ya i forgot.... Vcore 1.3v and vdimm i put 2.0v...izzit ok....

yaaa i want to Oced more but little confuse about vdimm.... how to set....plezz help me... wat should i set to my vdimm...

Oh, thanks a lot for super quick reply. I can check V-core but didnt see V-dimm, is there any third party software? My mobo, ASUS M2N32 Sli Deluxe should able to run 1600mhz HT in stability. I do not have power on issue when I OC to 2.3GHZ, only when I up to 2.4GHZ from Bus speed 220 to 230.

If I put my vcore to auto, will it increase automatically to adjust its speed? Or I should put manual?

One of the computer shop offer me CM Aquagate Liquid cooling for both CPU and GPU for just RM399. Damn cheap as it is old model (those that can sit internally by occupying 2 bays). However, it just mention it support up to AMD 940 socket, I am not sure if AM2 can be supported. 

-pWs- i have problem.... last night when i Oced to 2850mhz....then i run orthos.... after 1 hour and 30 minit... my pc hang...my vcore 1.3v n vdimm 1.8v as u say earlier.... should i increase vcore or vdimm... or both of them....

i think my ram divider is 7 and my timing 5 5 5 18

I OC my Bribane 3600 to 2375Mhz also face problem (25% OC)...

Sometimes (seldom though), I restart computer, it shows (the black screen) in safe mode, Press F9 to continue, it revert back to 1900Mhz...

I put at 250Mhz, & adjust the HT to 4X. make sure it is 1000Mhz range. Disable Cool & Quiet. Set RAM at 533Mhz. (I m using Kingston 667 Dual Channel)

I m using Biostar Geforce 6100, and Acbel I-Power 450W. PSU not enough Power ? How to check system stability beside Nvidia ?

yaa right.... ok i will try.... thanks -pWs-

My RAM not put near the CPU... already put as far as I can!!

What HT/ RAM divider ? I just set my RAM to 533Mhz in BIOS, though my RAM is 667Mhz. But, after OC, the RAM is 533 X 1.25 =667Mhz...

My Kingston RAM can not OC one, it will automatically restart computer if I put 667Mhz x 1.25 = 833Mhz

MY rig: Biostar Geforce 6100 AM2
              Kingston 667 1 GB  x 2
              Acbel I POwer 450W
              GAlaxy 8500 GE
              Dell 19" Wide Screen Monitor

wHY NEED TO PUT AS NEA AS POSSIBLE ? LAST TIME. other forumer tell me to put to the nearest slot... Say, near CPU, HOT !!

I m confused noe...

hi it seem my rig cannot go anymore... i try to Oced 2850mhz... at Vcore 1.32v n Vdimm 1.8v{default}.... this time my pc suddently shut down.... its seem quite hot....   any suggestion...

[attachmentid=274259]

so using speedfan or everest, we cannot get true reading of brisby core temp? me using everest, now the temp is 55

wat other stuff need to turn off, other than cpu spread spectrum?

how under the ram options. like DRAM extra strength?

my vcore is 1.325v, vdimm 2v.  2.9ghz(300x9.5), ddr533 divider. orthos for 30mins ok, but play granado espada and watch quake4 demos at the same time, pc restarted. up vcore again?

I m using Prime95...

---

Added on August 8, 2007, 10:52 pm
YA, I undestand....

Now, my RAm is 352 x 2= 704 Mhz (I am using DDR2 667),

Slight clock shouldn't be a problem for my Kingston value RAM , right ?? Should  I put it at 2.0 V or just left it at 1.9V for DDR voltage ?

congratulation   

let's show us some screenshots 

Ok...my system is as stated in my sig. My fsb seems to get unstable anywhere above 260mhz. So far Ive tried by putting multi x5, lowering ram to ddr400and turned off c n q. Anythin else I aint doing right?

nice result already

btw, issit bottlenecked by the ram? What's your ram's limit?

Ok......figured out the prob. This board needs to pump the chipset voltage  Never had to do that with my old neo4 platinum. Pushed it til fsb 300 stable 

Hmm....but now got another issue. Wen i 1st clocked it to 2.6ghz it would hang after posting(while loading windows) and even hang at post. No matter how much i pump voltage it wud still do dat. However after i reset to lower settings and pump voltage then fsb, it works perfectly. Could be my bios or smth?