I see, thanks for the info bro. Never tried flash BIOS with OCed cpu

The latest BIOS for TA690G from 8tvt is rock stable

I played games and not even a single 'display driver has stopped and has been recovered'. No problem OCing and using onboard VGA

For the mean time, the onboard is great enough already for me

But I got a Q, from the web, it stated that it is X1250, but why is it becomes X1200?

I think that's because of BIOS most probably. I didn't try playing games using the default BIOS, but with 427, sometimes it blacked out. But now using 605, so far so good

Yes you can, and full features depends on your mobo. You can read more about OCing in the respective thread provided. It helps, and for any guidance, here is the place

65W is the wattage used for the proc

Me too, but don't really care

Even OCed 25% increase is great for me. At least I can feel the difference from stock speed

I thought I'm the only one facing this problem, but it seems a normal problem, so nvm

There's latest one eh? 605 is 6/5/2007

I think you missed something. Probably the 2T thing, or anything. 605 bios is great, I don't think it limits down the fsb

Spread spectrum? I have no idea what is that

Really achieving 2.5GHz so hard? To me I achieve 2.8GHz easily using that same BIOS. I don't know what went wrong

Dem, how come can get easily 3ghz andd 3.2ghz while i'm still struggling maybe i'll try to push harder once i'm free

It didn't happen before you flash the new BIOS right? I wonder what went wrong

You can't pass FSB 300, what does that mean? Even with some tweaking here and there, the error msg after saving BIOS appear is it? If that's the case, well basically I'm facing the same thing. I once tried FSB 306 and 311, can boot but fail in Orthos. But I get the beep sound if I make it to FSB 316.

TF7050 is a better board for OCing compared to TA690G iinm. It just that TA690G comes with slightly better VGA for someone who is short of cash to get a stand alone GPU

Yes, I forgot to highlight both of them too. I'm having your 2nd problem if I push to 2.9 or 2.95GHz. The 1st one also sometimes happen for 2.95GHz, but I didn't face any problem reaching up to 2.8GHz. As for me, all I can think of is poor hardware combination, especially on PSU Is it BIOS problem? I don't know, but I don't think so because for me, this one is rock stable. I can play games using VGA even with 2.8GHz, RAM divider 533 and no BSOD or whatsoever

What's yours? Brisbane? I only prime stable up to 2.66GHz only with stock vcore. Further than that, need to adjust a bit

Yup, that's the one bro. Still having trouble getting higher? I wonder why

I think kalakatu did mention that he did uses the same setting as before with 570U. Also already enable 2T mode. How bout this, try from the beginning and don't compare it with your previuos 570U. Maybe different board needs different tweaking and result

Bro you didn't decrease HT Link Frequency meh? That's dangerous for mobo if your HTL is above 1000MHz. While OCing cpu, try to make HTL below 1000MHz

OCable but not recommended as it may damages the mobo within short period. Correct me if I'm wrong

Exceed 1GHz HTL improves integrated gc? I don't know that either. Well push a bit can lar, but too much might damage it soon.

What do you mean by only 1GHz HTT?

http://www.driverheaven.net/overclocking-m...ingle-core.html

With standard HT Freq 1000Mhz, we run at 2000Mhz HT (it is double pumped) as advertised on the AMD box. If the HT bus is 16bit wide (2 bytes) with dedicated upstream and downstream, we have
2000 Mhz * 2 bytes = 4000MB/s (in one direction)
which is 8000MB/s (upstream and downstream) total bandwidth between the CPU and inbuilt Northbridge.

And now I have a Q for myself. I can't get stable at FSB 310 and 300, only until FSB 296. I tried until to tweak here and there, but after boot screen, BSOD. I'm using RAM divider 533, 4-4-4-12 timings, 2.15 vdimm and +0.15 vcore. I tried to make it 5-5-5-15, 2.25 vdimm and +0.175 vcore, also cannot boot. I tried TRFC 105ns as well, but then after save BIOS, the screen just goes blank. Is it because of my RAM has reached its limit? If I use RAM divider 400, I can't push until FSB 296. Only until forgot-already and then there's beep sound

This post has been edited by afosz: Jul 25 2007, 12:52 AM

LOL I can't read the website

I never exceed 1GHz not because I said it is forbidden. It is because I read reviews and guide said so, and recommended to keep it under 1GHz. Of course round 1GHz is fine actually, maybe 1.2GHz but further than that, kinda push the mobo too hard

Or you can check out the 1st post. See the stats which mobo is commonly used by us