AMDŽ Socket-AM2 Overclocking thread (V2)

Lowyat.NET forums

Lowyat.NET Kopitiam Garage Sales

Lowyat.NET Rules and Regulations FAQ Help Search Members

Welcome Guest ( Log In | Register )

Lowyat.NET -> Overclockers United

Bump Topic Topic Closed RSS Feed

14 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

AMDŽ Socket-AM2 Overclocking thread (V2), discuss our setup/overclocking issues

views

dblooi	Jul 15 2007, 10:22 AM Return to original view \| Post #21
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(awh85 @ Jul 15 2007, 09:26 AM) about the ram or pci device, i dont think thats the problem coz there are no beep sounds coming from the mobo. i doubt it that i flashed the wrong bios. here is the link R69AM605.BST i heard many ppl say its stable and rock solid then only i decide to flash it. mana tau... one of them is called 010 and one called 011? the 010 got light, the 011 below it doesnt. sorry for poor quality coz phonecam Shot with W550i at 2007-07-14 yea, its warm after powerup. Shot with W550i at 2007-07-14 thanks. hi a2h85 , i've faced your problem b4 , shouldn't be a big problem i guess. IMHO , the bios that you've flashed is ok, just that some setting in your previous bios not match / clashed with this new bios, that's why it won't boot up. To solve the problem , just clear the CMOS by removing the jumper and recap it again. Im pretty sure that the bios that you've flashed is ok. You can try to clear CMOS 1st , if cannot solve the problem then come back to here again. regards, dblooi
Card PM	Report Top Like Quote Reply

dblooi	Jul 15 2007, 11:20 AM Return to original view \| Post #22
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	Guys, anyone has use the new amd processors BE 2300 & BE 2350 b4? Anything special with them if compared to brisbane 3600+? This post has been edited by dblooi: Jul 15 2007, 11:27 AM
Card PM	Report Top Like Quote Reply

dblooi	Jul 15 2007, 11:27 AM Return to original view \| Post #23
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	To awh85, What's your opinion about Biostar TA690G? I've seen many complains on the AMD driver issue , as well as the bios . Mind to share your opinion about this mobo with me? Regards, dblooi This post has been edited by dblooi: Jul 15 2007, 11:28 AM
Card PM	Report Top Like Quote Reply

dblooi	Jul 15 2007, 11:49 AM Return to original view \| Post #24
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(soulfly @ Jul 15 2007, 11:30 AM) BE are Brisbanes they're just running at 45W oic. Thanks ,soulfly .
Card PM	Report Top Like Quote Reply

dblooi	Jul 15 2007, 11:57 AM Return to original view \| Post #25
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(awh85 @ Jul 15 2007, 11:49 AM) hi. first of all, thanks for ur help. my problem was just a small one. i just had to reset the jumper and it booted up. no problems on it now. for the drivers issue, im using catalyst 7.6 now which doesnt give me problems (except that the igp is showed as x1200 instead of x1250 but thats not a big problem and doesnt affect performance )but previous 7.5 did. so far, the board has given me no problems except for the problem i was facing just now. sound is good. lan is gives no problems. graphics are good. can play most games like cnc3, fifa07, carbon, FEAR, battlefield 2, etc etc but u must make compromise on resolution and quality la. quite a lot of ppl can get a good overclock on this board and me using the automated overclock can also get my 3600 brisbane to 2.3 from 1.9 just by changing overclock profiles without any advanced overclocking knowledge. with my brisbane, my idle sys temp is below 40 as well as cpu temp. so far im happy with the board and also like the pcb colour coz it looks interested compared to others haha. You're welcome and thx for sharing your opinion. So far what's your highest cpu frequency that you've reached / oc b4? Any screenshot?
Card PM	Report Top Like Quote Reply

dblooi	Jul 21 2007, 05:47 PM Return to original view \| Post #26
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	Just try to OC with new mobo biostar TF-7050, able to hit 3.2GHz easily cpu-z validation page: http://valid.x86-secret.com/show_oc.php?id=219196 Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

dblooi	Jul 21 2007, 08:57 PM Return to original view \| Post #27
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(-pWs- @ Jul 21 2007, 08:32 PM) How about Vcore? Got any difference? And can u use 667MHz divider when u achieve 3GHz which cannot be done with your previous board? -pWs- hi , vcore has no problem .. i've tried to raise the vcore to 1.71v for testing purpose, no problem at all. Ya this board don't have the" memory divider bug",u can see from the screenshot, i'm using 667 divider Problems are: 1) clockgen is not supported yet 2) max vdimm 2.44v only 3) safe mode as sensitive as usual the rest yet to be discovered.... This post has been edited by dblooi: Jul 21 2007, 09:07 PM
Card PM	Report Top Like Quote Reply

dblooi	Jul 21 2007, 10:28 PM Return to original view \| Post #28
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(ronaldjoe @ Jul 21 2007, 10:24 PM) Walau! Just bought 2 biostar 7050 with 3800 x2 last week for media PC. I didn't realise that it's easily overclockable. maybe you should give it a try btw, it is bcoz my proc boleh tahan also la. if get laosy proc cannot go high also
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 04:07 AM Return to original view \| Post #29
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(ronaldjoe @ Jul 21 2007, 11:29 PM) I built them for my brothers. Haha. I have no chance to overclock it. LOL. Is the overclockability attributable to new nvidia 630a chipset? I am thinking of getting a new MOBO to OC mine. 590 SLI or new 560 (AM2+) chipset or this 7050/630a? Please share your thought on it? Thanks. The new 560 am2+ chipset is just a BIG LIE from biostar. Actually it is not an am2+ chipset , just compatible / support am2+ platform like any other Nvidia 5/4 series mobos . http://www.ocer.net/article/a_show.php?id=11232 Take a look if you are able to read chinese, it shows that 560 chipset is just another am2 chipset which the Hyper Transport Speed is 2G also. If it is an am2+ chipset, it should be able to run at 3G. Also , i heard that the OC ability of this 560 mobo is not as good as his senior TForce550SE. You can try to get 570SLI or 590SLI if you plan to do some great OC as the OC ability of these mobos are confirm good. I've bought this TF7050 bcoz i addicted to MATX mobo adi, dunno why but i just love matx mobo so much.... This post has been edited by dblooi: Jul 22 2007, 05:04 AM
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 04:21 AM Return to original view \| Post #30
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(GHz1 @ Jul 21 2007, 11:52 PM) 3.2GHz? Ur proc is really not bad Mine, max is 3.1GHz.. VCore 1.7v to get 3.2GHz? too high ma.. Don't dare to pump up to that high.. Btw, is the temp reading correct? What software r u using? Mine is wrong coz at idle and load I got static 32C.. Mind to share. Thanx. vcore 1.55v to get 3.2Ghz. 1.7v is just pumped for testing purpose. CPU-Z shows wrong reading if the vcore is higher than 1.55v. You mean any OC software like clockgen? Nope i've tried to use clockgen and fsbset but they just don't recognise the clock generator of TF7050-M2 The only OC software that can work ( as i know) is biostar OC tool. But it is just simply buggy and very hard to use.... I'm using biostar hardware monitor to monitor my proc temperature. The file size is small and it is easy to use This post has been edited by dblooi: Jul 22 2007, 04:22 AM
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 10:32 AM Return to original view \| Post #31
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(GHz1 @ Jul 22 2007, 07:33 AM) That's means in BIOS u add 0.2550v rite? Mine need 2 add 0.2620v to reach 3.1GHz Btw, what is the highest FSB u can get? 1 more thing. Is safe mode sensitive means it'll shutdown when OC unstable or whatsoever? TQ i add 0.3v, after vdrop left 1.55v for vcore. oh ya , vdrop problem is quite terrible on this mobo. Safe mode means BIOS won't allow you to post unless you change your setting again in BIOS highest HTT? i think is 342 so far. I didn't drop the cpu multiplier and test it slowly This post has been edited by dblooi: Jul 22 2007, 10:43 AM
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 10:44 AM Return to original view \| Post #32
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(soulfly @ Jul 22 2007, 10:42 AM) what's the point getting high HTT? it doesn't increase performance or anything. i've started to ignore all these high HTT thing already. the most important is high cpu clockspeed and high DDR speed... that's what matters. agreed . That's why i didn't try it out. Mod pls update my PI result in the OC database. Thanks
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 01:05 PM Return to original view \| Post #33
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(ronaldjoe @ Jul 22 2007, 01:01 PM) Tailow. Thank you for the advice. you're welcome oh ya, anyone at here has try the new amd BE 2300/2350 proc? I've heard that it is not just ordinary brisbane, AMD has implemented more transistors into it, but dunno they've got fix the L2 cache latency problem or not.
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 02:01 PM Return to original view \| Post #34
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(casperito @ Jul 22 2007, 01:30 PM) i've read the articles about BE-2300 & BE-2350... no good... the OC ability is very low... the proc onli use low wattage onli... they said that the BE-2300 can be compared with x2 3600+ and the BE-2350 can be compared to x2 4000+ but to me, x2 is better than those BE's proc... it even cannot beat C2D E2140 in OC for christ sake... no use to test this... next week going to a fren of mine going to buy this proc and test it... but i doubt it will perform good... AMD release this proc i think for user who want to save power not OCing,., i just ask uncle google about this. Ya really not a good choice. I'm looking for a proc that can run PI faster, for sure it wont be this 1
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 02:11 PM Return to original view \| Post #35
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(ronaldjoe @ Jul 22 2007, 02:01 PM) How about AN9 32X? Is it a good OC board? Please advise. I got offer. Yup. That's what I heard from CZone. The fella told me not to get it as it's energy efficient version of AM2. Instead I bought 2 units of AM2 3800. i hv no idea about AN9 32X . sorry maybe you can try to google it
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 05:11 PM Return to original view \| Post #36
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(lohwenli @ Jul 22 2007, 05:02 PM) Hell, even the 3600 brisbane can't beat the E2140 in OC..windsor even worse (unless you have a F3 windsor).. But yeah, thats one power saving processor. Quite possible to run it fanless if casing ventilation is not too bad. wondering where can i buy F3 windsor. Anyone has any idea?
Card PM	Report Top Like Quote Reply

dblooi	Jul 22 2007, 06:17 PM Return to original view \| Post #37
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(ronaldjoe @ Jul 22 2007, 06:11 PM) I had first hand feel on T-Force 7050/630a when I installed it. It was a very nice built board. Is it bcoz of the board and different chipset 570 vs 630? Northbridge of T-Force 7050 was surprisingly cool... yeah same thought , the northbridge is really cool. Currently i feel like 2.44vdimm is not enough , i'm looking for a way to further increase it (vmod perhaps...) . If you know any method that i can increase the vdimm, do let me know ok? Thanks
Card PM	Report Top Like Quote Reply

dblooi	Jul 23 2007, 01:12 AM Return to original view \| Post #38
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(soulfly @ Jul 23 2007, 12:08 AM) try pm jy14... last time i heard he has some stocks already PMed . He asked me whether wanna join a bulk together with you or not. But then afterwards he told me that the stock already taken by other seller
Card PM	Report Top Like Quote Reply

dblooi	Jul 23 2007, 01:27 AM Return to original view \| Post #39
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(cyberloner @ Jul 23 2007, 01:19 AM) 3800+ Winsor 90nm 65 Watt cpu code CU available here.... but i suggest Brisbane if u wanna clock.... my company do sell both at the moment while stock last... latest amd cpu will be 4000+ at least... 3600+ 3800+ gonna be gone I'm using brisbane now. http://valid.x86-secret.com/show_oc.php?id=219196 Currently I'm looking for CZ rev for 3800+ , if you got any pls let me know ok? Btw, Thanks for your offer
Card PM	Report Top Like Quote Reply

dblooi	Jul 23 2007, 09:32 AM Return to original view \| Post #40
...... Senior Member 1,404 posts Joined: Apr 2006 From: ......	QUOTE(ronaldjoe @ Jul 23 2007, 07:24 AM) I got mine from US before it was launched in Malaysia. It was freaking expensive. I shouldn't have bought it. lend me for a night as well
Card PM	Report Top Like Quote Reply

« Next Oldest · Overclockers United · Next Newest »

14 Pages < 1 2 3 4 > » Top

Topic ClosedOptions

Change to:

0.0459sec

0.73

7 queries

GZIP Disabled
Time is now: 4th December 2025 - 04:34 AM

All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)

Removal Request

Powered by Invision Power Board © 2025 IPS, Inc.