haha..i dun really care..doesnt that mean there will be more people who using AMD as their super-oriented-budget processor? 

and if the price is really going down, we can take this opportunity to grab it for our gf's rig or our second/third/forth rig..

no, thats enough i guess..
i want to know the timing that u r using to try get to 3.0GHz..

and just an additional information, last time i managed to use DDR1080 CL5 for my previous windsor..
but for this brisbane, when i was using the DDR800 multiplier, the ram cannot go further than DDR1066, even with the same voltage and timing with the previous windsor..i dunno whats wrong with that 

my highest ram clock that i've tried with WIndsor is 1GHz with AUTO timing and 1080MHz for Brisbane

the timing i set is AUTO

---

Added on June 23, 2007, 11:53 pmcan boot and have passed 1M superPI.will try 32m later..time to sleep.thanks for the advice

ok..

pls add me into the list:

3600+ X2 Brisbane G1 | smokey | BIOSTAR TFORCE 6100 | Kingston DDR2-667 | stock cooler | 2415MHz

http://valid.x86-secret.com/show_oc?id=210790

no matter wat i do, i cant get the HTT to go over 260MHz.fed up d...
lowered memory divider, cpu multiplier...pump high vcore....still CANNOT!!

so now i put command rate at 1T to achieve higher memory eficiency... from 54% to 58%...hehe...

anybody can recommend me a board with at least 2.2v v-dimm?

sorry guys ... a bit lazy to google around..!!just a quick question...how do setting up ram timming effect ur OC capable??!!

who have experience about update bios???

what is your voltage of the brisbane cpu and the ddr2 ram?

I just bought  brisbane 3600+. I am also in quest for increasing my cpu clock. Currently 1.38v for the cpu at 2470MHz (260 x 9.5). RAM still at 1.95v, 533MHz ram divider with 5-5-5-15-1T.

I am wondering if the cpu volt at 1.38v is safe for 24/7 usage? Quite afraid that I might shorten the cpu lifespan?

I can boot if using 667MHz divider, but the ram will heat quickly and after about 30 - 60 minutes later, the computer will crash and reboot even I increase ram volt to 2.1v. I didn't dare to increase higher because this kingston ram have neither passive cooling nor active cooling yet.

I think, you can try use any active cooling such as AllnGap's ram cooler if you want to try the 667MHz divider so that it won't be so hot during long operation hours. Hope this idea helps.

But everest shows wrong ram divider information. CPU-Z shows the correct ram divider that I am currently using.

[attachmentid=255393]

I understand your situation , because it is where I've stucked as well. My problem more or less same with you, pc reboot or bluescreened at 2.7Ghz-2.8Ghz if i use 667 divider. I've look at your spec, your are using a Nforce4 chipset mobo. I'm using Tforce 6100 AM2. I suspect this is a bug of Nforce4 chipset...... I've seen people use 667divider and push to 1000Mhz without problem by using biostar TA690G, some 590 SLI chipset mobo , some 550 mobo .... but yet havent see anyone do that with nforce 4 series mobo 

maybe you can try cpu multiplier X8 and ram divider 533. In that case, the ram frequency is equal to CPU/6 which means same as ram divider 667. I've tried it just now, failed at 2.95Ghz for unknown reason again 

I'm using 800 divider for daily usage. See screen shot below

hmm...ic. So what's your best result so far? I meant the highest CPU frequency that you ever achieved.

---

Added on June 30, 2007, 8:33 pm

haha, i just did it because i'm so curious. Supposed my mobo can hit around 390 HTT but dunno why today keep failing at 370x 8   

btw, what's your best shot? I meant the highest CPU frequency that you ever achieved

some update for all~

45nm js start assembly at Penang last few day ~~

so i think end of July this proc able to launch~ after Sg testing~

If i not see wrong it may be barcelona~

bro....gigabyte SLI DS4 good in OC o not?

i jz bought this + 3600 brisbane....

thanks for ur reply

wat do u mean by lucky?

3600 brisbane
giga ds4
kingston 667 x2
big typhoon

teach me how 2 OC this system....

TQ

GA-M57SLI-DS4 rev 2.0

can o not?.....i wan OC stable n operation whole month 1....

is it possible?

thanks all sifu!!!........

im really really a noob beginner.....

so i jz wan OC to 2.4ghz then how to set ram speed (kingston667x2)...

pls show me u guys experice...

where to Download SP2004 or Orthos??

THANKS~~~

Mayb if u get the DFI mobo like -pws-, u might b able to cold boot it anytime. I'm about to get back my AM2 rig from my GF. Once its back i'll test out the NF-M2 nView. -pws-, powerslide and soulfly, please beware for a flooded PM of questions. hehe, nolar, just kidding, later ask u guys about OC, now, let me try to wrestle my rig back 1st. haha

Since I overclock in the BIOS (I OC 25%) for AMD Brisbane 3600.

I set CPU Mhz to 250MHz, HT bus reduce from 5X to 4X. I increase voltage +0.05V

However, does that mean the RAM automatically being OC ? I m using Kingston 1GB 667Mhz Value RAm

My system some times bcome unstable & the computer revert back to 200Mhz. Why ?

I got 1 casing fan & an ONE additional 80mm UVLED fan, should be enough?

I even use this OC (24 hour)l office typing etc, should I just revert back to normal setting & only OC it when I need it??

How to increase the RAM DIMM ?

In Bios ? I can't find one in BIOS. maybe I half blind....

hi all....

i bought BIG TYPHOON today,so happy then i start my 1st time OC`

but i seem hardly to enter BIOS,keep hang...how come like this?

im using GA-M57SLI-DS4 rev 2.0 + 3600 Brisbane...

anybody help?

Thanks....