That's is VDSL2+

RM129? or earlier Unifi Advance Pro?
Have you speedtest?

You can go TMpoint and ask for upgrade to 100Mbps, why wait until 30 June 2019?

None of LITE got turbo yet, except those new install start from today.


Nice, you are the first one got this new plan, I'm still waiting opt-in to new plan.

LOL...
Later 2020, the MSAP will drop half some more, then you complain again?

NO PENALTY no matters you upgrade/downgrade (but unsure same plan like 100Mbps can change to new 100Mbps or not.)

Notes:
Contract will renew no matters your contract ended.
No more turbo, as gave turbo ahead.
No changing equipment except BTU if faulty.
Must go TMpoint youself ONLY.

All above answer can be found inside their NEW faq.
https://unifi.com.my/lsds/assets/images/per...mefibre_faq.pdf

This post has been edited by wilson1stop: Sep 10 2018, 10:43 PM

That's was EXACTLY thanks to NEW Maxis Fiber, TM was copied it and allowed existing users switch to TURBO-AHEAD plans and re-contract instead of penalty.
Maybe stop bleeding (jumpship) to Maxis and TIME...

Now where still got ppls go TMpoint throw eggs?
Better throw Complaint via SKMM website...

SAME thoughts like me.
TM always the WINNER!! and we're always the LOSERS!!!

It's time for Peoples become Boss... for punishing back these Telco/ISPs...

IPTV using addiotional bandwidth to streaming, could be limitations of DIR-850L...

Bro, SKMM Broadband standard is 70%, just submit report and claim ur compensation...

Perhaps TM still making juices from Slowmyx users? since their last quarters made RM100 mils...

Relax, for better understanding...

Mbps or Kbps is refer for those plan offers, 1024Kbps = 1Mbps, and 1000Mbps = 1Gbps (also can refer as Kb/s)

While KB/s or MB/s, just divide by 8, eg. 10Mbps you get 1.25MB/s (but reality you will get a little lesser)
**This normally for your file transfer speed, to calculate remaining download time.

Just buy new router, or ask TM livechat and go TMpoint collect (if any)

802.11b : 1, 2, 5.5, 11 Mbps
802.11g : 6,9,12,18,24,36,48,54 Mbps
802.11n : up to 300 Mbps

MIMO technology
2.4 GHz 2 x 2

RJ45 for 10/100 BaseT for WAN x 1, RJ45 for 10/100 BaseT for LAN x 4
https://www.asus.com/Networking/RTN12HP_B1/specifications/

This post has been edited by wilson1stop: Sep 11 2018, 01:13 AM

You need 10/100/1000 for WAN, and LAN also if connected using cable.

Better ask @Soon Wai for wifi
https://forum.lowyat.net/topic/3994248/all

This post has been edited by wilson1stop: Sep 11 2018, 01:20 AM

test with cable CAT6?

go router portal and find 20/40Mhz instead of 20Mhz.
Even you set it, expect 50-70Mbps for 2.4Ghz wifi.

--
Actual wireless speeds vary significantly from the above theoretical maximum speeds due to:
distance - distance from the access point, as well as any physical obstructions, such as walls, signal-blocking or reflecting materials affect signal propagation and reduce speed
interference - other wireless networks and devices in the same frequency in the same area affect performance
shared bandwidth - available bandwidth is shared between all users on the same wireless network.

In addition, net IP layer throughput of WiFi is typically 60% of the air link rate due to WiFi being half-duplex with ACKs, and being CSMA/CA. The number of simultaneous connections, and even the type of wireless security can affect and slow down some older routers with inadequate processors/memory.

Below is a breakdown of actual real-life average speeds you can expect from wireless routers within a reasonable distance, with low interference and small number of simultaneous clients:
802.11b - 2-3 Mbps downstream, up to 5-6 Mbps with some vendor-specific extensions.
802.11g - ~20 Mbps downstream
802.11n - 40-50 Mbps typical, varying greatly depending on configuration, whether it is mixed or N-only network, the number of bonded channels, etc. Specifying a channel, and using 40MHz channels can help achieve 70-80Mbps with some newer routers. Up to 100 Mbps achievable with more expensive commercial equipment with 8x8 arrays, gigabit ports, etc.
802.11ac - 70-100+ Mbps typical, higher speeds (200+ Mbps) possible over short distances without many obstacles, with newer generation 802.11ac routers, and client adapters capable of multiple streams.

you connect 5ghz is it? It's up to 600Mbps.

Ur 802.11n only capable for 144Mbps, but ur speedtest able above 100Mbps? Or just iPerf?

I see, then make sense.
1 stream 144Mbps, 2 steam got 288Mbps.
Wifi on half duplex only, so you got 100ish Mbps for your 802.11n wifi.

You try come my kampong, my nearby got over dozens of wifi hotspots around my house...

Hmmm, not yet compared to my past experiences.
IF around 20-30 2.4Ghz wifi hotspot, still connect-able.
But exceeded 30+ 2.4Ghz wifi then you will kept get kicked out and extremely slow unstable wifi speed due to many overlapping channel. (5Ghz still surf-able)


While I'm praying for tomorrow...