ONU password should be set to a default value either common to TM or alcatel. U can try ans#1** (asterisks redacted for privacy pls check pdf) as that is the olt password. It might work. If not u need to pull the xml config file from tm management vlan200, more info in the doc.

Nice one. Didnt know we use fortinet here. Fortinet more popular then mikrotik in sg..

According to the olt manual, turbo speed is dependent on 4 factors
Pppoe speed cap
Gpon speed cap
Onu ethernet 100/1000
Olt configuration for eth bridge 100/1000 (prob the problem)

Yes . Alcatel better than huawei or fibrehome

I use streamyx and time lol.

One of Aztech key feature supposed to be iptv over standard lan. Needs static routes to setup, but should be able to get the info from the olt manual someone sent earlier.

Ok. I checked the manual and it seems that you can pull the config files from the voip vlan400 to find the onu password using ftp. Then u have to try configure the onu yrself. If not the more straight forward solution is to get the tech to execute these on the olt:

#### Move hypptv to onu port 4 and bypass router ####
configure qos interface 1/1/5/1/10/1/4 upstream-queue 5 priority 6 weight 0 bandwidth-profile name:8M_UP_IPTV bandwidth-sharing uni-sharing
configure qos interface 1/1/5/1/10/1/4 queue 5 priority 6 weight 0 shaper-profile name:8M_DOWN_IPTV
configure bridge port 1/1/5/1/10/1/4 vlan-id 600 tag untagged network-vlan 600 vlan-scope local
configure bridge port 1/1/5/1/10/1/4 pvid 600 default-priority 5 configure igmp channel vlan:1/1/5/1/10/1/4:600 max-num-group 64 max-msg-rate 16
configure igmp channel vlan:1/1/5/1/10/1/4:600 no previewpackages [1...1024] configure interface port uni:1/1/5/1/10/1/4 admin-up

#### enable other port for HSI (tagged svc) ####
configure qos interface 1/1/5/1/10/1/2 upstream-queue 0 weight 0 bandwidth-profile name:20M_UP bandwidth-sharing uni-sharing
configure qos interface 1/1/5/1/10/1/2 queue 0 priority 1 weight 0 shaper-profile name:20M_DOWN
configure bridge port 1/1/5/1/10/1/2 vlan-id 500 tag singletagged network-vlan 500 vlan-scope local
configure interface port uni:1/1/5/1/10/1/2 admin-up
(Replace bold for diff port number)

#### Disable vlan tag to support non vlan capable router (HSI)####
configure qos interface 1/1/5/1/10/1/2 upstream-queue 0 weight 0 bandwidth-profile name:20M_UP bandwidth-sharing uni-sharing
configure qos interface 1/1/5/1/10/1/2 queue 0 priority 1 weight 0 shaper-profile name:20M_DOWN
configure bridge port 1/1/5/1/10/1/2 vlan-id 500 tag untagged network-vlan 500 vlan-scope local
configure bridge port 1/1/5/1/10/1/2 pvid 500 default-priority 0
configure interface port uni:1/1/5/1/10/1/2 admin-up
(Replace bold for diff port number)


As u can see, the speed configured here is 20Mbps. Can change to any speed desired. (Still subject to pppoe speed restriction, but can borrow someones turbo id )

This post has been edited by miloaisdino: Sep 12 2018, 04:27 PM

There is a web gui. For this onu i dunno, but some onu web gui can only be accessed when booted with gpon cable disconnected. The password u shd try searching for default ones on the internet. If the web gui is disabled, u should be able to telnet in (with passwd ofc). Usually there is an offending iptables rule that restricts webgui access (my experience with zte onus), remove it. If alcatel doesnt have webgui, u can goof around the cli and try maybe native-vlan settings and port binding related?

If u cant find the onu password, u might find it on vlan 400, ftp://ontftp:ont123@172.16.254.10:23 in one of those xml files

Hint: most of the time onus have dhcp disabled. So u have to assign yrself a static ip (along one of those 192.168.x.x ranges and gateway onu located at probably .0.1, .0.254, .1.1 or .1.254)
Gd luck!

This post has been edited by miloaisdino: Sep 12 2018, 05:11 PM

Yep thats correct. Even the console password is safe in tm asset inventory. For the aztech tho, in deployments in sg can reach gigabit nat throughout despite iptv with igmp snooping. I believe this is hw accelerated by aztech alr.

But i dont think SLID is an issue as TM does not enforce this. They go by PON port and password only.
Ok u better find a way to backup the config then in case. The olt manual says SLID is enforced...

This post has been edited by miloaisdino: Sep 12 2018, 05:20 PM

7009 is singtel version
7008 is stock version
Both same hardware and cross flashable

This post has been edited by miloaisdino: Sep 12 2018, 05:21 PM

Just wondering. SLID and pw are diff names for the same thing or are they different?

Personally i dont recommend 40mhz for 2.4ghz. This is because might have interference, make internet even slower. Anyway 20mhz can alr get 60-80mbps on 2.4ghz...

Can install unifi playtv on the hypptv android box or not?

The next thing u know ppl go menara tm, tell them want u turbo immediately or else i will want to downgrade plan

This post has been edited by miloaisdino: Sep 13 2018, 02:13 PM

Can la can either connect btu or router to those cat5e
. But i think need terminate the wires yrself, just get a rj45 wire crimper then .. cos currently its only wired for telephone...

I recommend u get a gigabit switch to connect all those wire to and leave a spare port for the router at that box.

This post has been edited by miloaisdino: Sep 13 2018, 05:58 PM

Can explain yr wiring pls... dont tell me the rj45 keystone jack was left unconnected to anything
Can unscrew the faceplate in yr rooms and send the pic here pls.

Bcos some contractor damn lazy, just wire the telephone jack using cat5e cos developer said "data cabling" but requirement was "telephone jack required".. kek. u see yr contractor even used duct tape to attach the telephone twisted pair tgt.. (3 unused pair in the cat5e lol)

Note: u should double check the faceplate wiring as i highly suspect the contractor used your cat5e for telephone. U might need to reterminate the cat5e at each keystone as well, not just crimp at the masterbox

This post has been edited by miloaisdino: Sep 13 2018, 06:31 PM

If 60gb quota only enforce next year, then why didnt u subscribe maxis ?!
Ltr u must topup to unlimited quota unless theres a backlash (probably)

Press gobind to give community isp license la.. then can buy own olt and make fibre maybe even to neighbouring areas -----profit

Give community isp license lar.... liddat can acccelerate fibre rollout speed by x times the number of new players...

80% equipment congested is direct violation of mcmc minimum 30% reserve capacity qos standard...