Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 LYN PERODUA All-New MYVI Gen 3 - V2 [MG3], Passion Engineered - Dual VVT-i

views
     
cucubud
post May 11 2019, 11:56 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(zulfadzlis @ May 11 2019, 10:31 PM)
Been driving my Myvi for a week now. I have few questions that needs some answers:

1) Did anyone change their floor mat ? Any good brands out there ?

2) I have RM500 Raytech voucher. Should I install a new layer on top of my existing one ( comes with 1.5 av)? Read in some forum that Raytech tint gives problem when using smart tag. Have anyone installed Raytech tint before on their 1.5 av ?

3) My odometer is currently at 700km. How much will my first service (1000km) cost ?

4) Anyone have good suggestion for a door visor ?

5) My current fuel consumption is at 13.7km/l after 1 week of driving. I have been driving most around my campus. Is this good enough ?
*
1. My SA gave me a set of the Gear Up floor mat free.
2. I don’t have this voucher. I checked with Raytech, if use voucher, don’t have special discount. If don’t use voucher, got special discount. Not sure true or not.
3. 1000km is free inspection only. Wasted my time there.
4. My SA gave me a set of the Gear Up door visor free.
5. My Myvi fuel consumption is worse than yours. 13.2km/l only.

cucubud
post May 13 2019, 10:34 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 13 2019, 09:54 AM)
For question #2,
I am planning to do the Raytech tint also but dilemma whether stick on top of the current tint or remove it.
Any pros and cons if stick on top of the current or remove it completely and install Raytech.
*
Some shops don’t warranty on double layer tinting. You have to check with the tinting shop. On the original tint, Perodua will void the warranty.
If you remove the factory tint, will it spoil the demister on the RWS?
Yes, it is a dilemma.
cucubud
post May 13 2019, 01:11 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 13 2019, 01:07 PM)
It's the shop (Raytech) is the one suggesting to do double layer.
What is  RWS?
*
If they warranty you for double layer tinting, then it is good to proceed.
RWS is rear windscreen.
cucubud
post May 13 2019, 01:34 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 13 2019, 01:25 PM)
Oh i see, well that is what the shop told me but i have yet to get that installed.
Need to make an arrangement with them. Last sat went to Puspakom to do checking for transfer ownership for my other car. Really cilaka one, VLT 59% and they failed it. Need to remove the tint before go there again then straight to the shop and do new installation.
*
If FWS, VLT is 70%. 59% sure fails.


QUOTE(shchiam1978 @ May 13 2019, 01:26 PM)
I was wondering, by doing the double tint. Will it block the Smart tag sensor?
*
Depending on the film you installed.
You have to check with the tint shop.
cucubud
post May 17 2019, 08:41 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(fin8Ex @ May 15 2019, 09:43 PM)
anyone added additional tint film on top of the factory fitted llumar tint?

does it void llumar warranty? thks
*
QUOTE(shchiam1978 @ May 17 2019, 07:55 AM)
I have checked with friends and better remove the factory tint and install the new one.
Most of the shop will recommend you to double tint because they are lazy to remove the original one plus with the new tint rule in malaysia, they want to earn more by skipping the process of removing the old ones
*
If you put double layer, most likely Perodua will void the warranty.
Not sure about the new tint shop. If something happen, shop will blame Perodua and Perodua will blame shop.

If you remove the factory tint, the downside is on the RWS demister.
Don't think the shop will guarantee that they will not spoil the demister when removing the tint from the RWS.

cucubud
post May 17 2019, 12:51 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 17 2019, 09:18 AM)
Thanks for the info and sorry if i am about to ask a silly question since i just got my car 2 weeks ago.
Myvi AV got RWS demister? you mean the heater right?
*
Yes. Refer to those lines on the RWS.
cucubud
post May 17 2019, 12:59 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(Calveez @ May 17 2019, 09:47 AM)
Won't there be double protection and double heat rejection if you "double" tint it?
icon_idea.gif
*
Yes. Double protection.
The issue is factory tint has its specifications and the add on 2nd layer also has its own specifications.
Under hot sun the two films will react differently.

cucubud
post May 20 2019, 08:55 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(ISawYou @ May 20 2019, 08:47 PM)
Hi guys, I have 2 questions here.

1. What is the rad coolant brand fresh out of factory? mine currently is red in color.

2. If can't buy the factory coolant, can I mix the existing coolant with the ones im going to buy myself from outside (color, type, brand etc)?

The problem is the level of coolant in my car starting to drop, so I was wondering if I can find back the same coolant to refill, if not what are the options I have right now.
*
How old is your car?
Better buy back the same type of coolant from Perodua.
If you want to change brand, it is better to drain all coolant out and fill up with new brand.

cucubud
post May 21 2019, 07:37 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(ISawYou @ May 21 2019, 12:22 AM)
about 6 months, it dropped about 1 inch already from the day i got it. not sure if it's leaking but i will monitor for now.

okay, will check it out.
*
Your car is still under warranty. If the level keeps dropping, report the problem on your next service. Get them to check.
cucubud
post May 23 2019, 09:23 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(samjet @ May 22 2019, 07:41 PM)
I’m pretty sure it cannot go to next track either touching screen / steering control
What phone u r using? iPhone with Spotify here
*
QUOTE(darren_yuri @ May 23 2019, 01:43 AM)
Same here, I can’t skip the song tracks on Bluetooth by pressing from HU and steering control. Using Samsung Galaxy Note FE with Android 9.

Started to get fed up
*
Can change song. You just press on the next track icon (even it is greyed out, while the play icon is bright white colour).
Attached Image
cucubud
post May 24 2019, 02:23 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(dato K @ May 24 2019, 12:53 PM)
hi.....
one newbie question
the 6 months interval for service is calculated from the day receive car or from previous service?
*
From the day you received your car.
cucubud
post May 24 2019, 02:25 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 24 2019, 02:22 PM)
No worries. The shop recommended me to do double layer but i don't want and i totally forget about the heater. Now it' too late.
Well have to live with it.
*
Sorry to hear that.
How many lines were spoilt?
cucubud
post May 24 2019, 02:36 PM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 24 2019, 02:32 PM)
Initially few lines but they recommended it to be remove to avoid bubble.
ANyway what the heck, just remove it lo.
*
Do you mean you removed all the heater lines?
cucubud
post May 27 2019, 09:45 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(CharlieGambino @ May 27 2019, 09:36 AM)
hi guys, i am new here. just want to ask, car is going to jpj register tomorrow and maybe sabtu will get. is it too long or just me being anxious haha
*
How long have you waited for your car?
You are excited, you'll be getting your new car in the next few days.

cucubud
post May 27 2019, 09:50 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(crast @ May 26 2019, 12:33 PM)
my sa won't give me a single shit if i don't msg him now, he was like trying his best to procrastinate. Order status? he ask me go find out myself. sweat.gif
*
That one is a dealer or a branch of Perodua?
Dealers get small allocations while branches get bigger allocations.
Go and talk to the manager. If not fruitful, then cancel order and go to another branch outlet.

cucubud
post May 27 2019, 10:34 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(CharlieGambino @ May 27 2019, 10:05 AM)
around a month. thinking of getting tints due to jpj allowing solid back windows now. any recommendations?
*
Wait one month is ok lah.
Which model are you getting? Advance?
If Advance, then it comes with factory tint.
Why want to tint solid black? You cannot see anything.


cucubud
post May 27 2019, 10:57 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(shchiam1978 @ May 27 2019, 10:36 AM)
Mine is advance and before i purchase the car, the sales person asked me whether wanna tint or not. I told her yes. Biggest mistakes ever.
*
What's done is done. biggrin.gif
You just enjoy your new tint.

That guy's driving experience on 0 VLT on his car. I think 30% VLT on the back is good enough.


cucubud
post May 27 2019, 11:29 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(xcocacolax @ May 27 2019, 10:58 AM)
just booking 1.5 advance.. factory tint can choose VLT or not?
*
Don't think you can choose the VLT of your choice..

cucubud
post May 31 2019, 11:15 AM

Super Moderator
*******
Senior Member
3,076 posts

Joined: Jan 2008


QUOTE(Adrian_Alastair @ May 31 2019, 08:10 AM)
Hi, how or where is your preferred place to mount your dashcam since the middle portion of the dashboard already taken up by the ASA device?
*
I put mine next to the ASA device on the driver side.
Make sure you don't put the dashcam too near to the ASA device. It might block the recording.

4 Pages « < 2 3 4Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.1498sec    1.13    7 queries    GZIP Disabled
Time is now: 19th December 2025 - 10:01 PM