No that guy have to drill special hole to the armrest cup base.

The locktech i get should be from thailand as the box have thailand wording. The box written for model honda BR-V'16/AMAZE'16. The blocking is after installation. When pull out to lock, if i don't press in the center of the plastic before pulling to lock , it will be block by it. That guy told me is it like that as the center of the plastic does not have clipping thus cannot be clip in.

Locking position after pulling out:



When pulling out and does not press in the plastic, it will block the lock to fully extent:

if next time remove the arm rest will see the screw hole ?


since during installation the shop already told that ...so is normal for all the brv ....

No they use the existing screw hole.the original cupholder at the second seat already have screw hole there.

He only notice it is blocking after installation. Normally he install dfender pedal lock on brv and this is the first time installing locktech on brv. Are your locktech blocking as well?

i going to check the cup holder ...the screw ...see can do as yours or not ..

i not yet install pedal lock ...
another brand named geneo ..similar to thai lockTech but price about rm340...cheaper a bit ...

btw..the lock will blockage your leg and any part when driving ?

thanks ...

Yes all you need to do is drill a hole on the armrest cup base to match the original screw holder location.

I heard about Geneo lock but most of the recommendation is either locktech or aorto thus going for locktech as many of the car accessories doesn't carry aorto lock.

Locktech does not block the leg when driving and you can't see it from top view when it is not in lock mode.

Jordan& James, did your locktech need to gently push the center of the plastic before being able to pull out to lock mode?

OK ....

lockTech my area not many shop carry this brand ...may look for it too ..

New owner here.
BRV lunar metallic. BRV-E

Any owner change this tyre > Michelin 205/55/16 Primacy 4? i check my area about RM320 each, tyre from thailand.

Just get called from SA, Aug can get my brv-v

This post has been edited by kionglee: Jul 24 2018, 01:38 PM

i heard brv having issue with cabin filter. izzit new brv still dont have it ?

I'm using Locktech for over a year. No blocking issues. working well.

Thanks for the pic. Is the first picture in unlock mode? If yes, seem my locktech reside more inside than urs (Maybe he need to realign the locktech on my car).

Hi KoonMing, welcome. I took my car last Tuesday. I posted some picture shown still no cabin filter.

Yes, the pictures show the unlock & lock position.
I remember the installer took a bit of time to install it.
Very inconvenient if you have to keep pressing the plastic every time to lock.

Thanks i will bring back to the shop to realign again

Thanks i will bring back to the shop to realign again

Do you remember what model they write in the locktech box?mine write brv 16/amaze 16.they compare with dfender which write brv 17-18, the dfender pedal lock is slightly taller.

Yes, needed, as the design of the center feel a bit cheap, so every time I pull the lock, make sure the lock didn't touch d center. But for me is not end of the day.

This post has been edited by Jordan&James: Jul 25 2018, 12:06 AM

Dear All, I'm getting a BRV before the SST, current offer I manage to get is 4k rebate, sound good? Anyone get better offer than this? Kindly share your SA with me. Thank you.