Friends, WE ARE BACK WITH STOCK!

Sorry for this super long wait for some, will do our best not to run out of stock in the future!

Hi can you share the overall dimension of the FD vs Aquaphor?

Sure,

Aquaphor is 26x34x9 (cm)
Disruptor is 32x39x14 (cm)

So basically Aquaphor is more compact, but it is not self standing.

We now FINALLY have the maintenance video ready. Tried our best to make it as clear as possible. Any comments are welcome!

https://www.youtube.com/watch?v=AFAye8Kmpko

Great news! All our products now qualify for installments plan on Shopee. 6 or 12 months. You can make a purchase on Shopee and we either send the system to you or come and install.

New PoE+PoU packages!

hi, can pm total cost + installation fee at JB?

Will reply now, but unfortunately we have no installer in JB area

Many happy customers went for a 2nd year, changing stage 3 only, since stage 1 and 2 are still in great shape in places where there is no excess iron.

This post has been edited by hestati: Aug 15 2019, 12:05 PM

Bought one set and they helped to install it.
Best decision ever. Not only did they carefully explained everything, but gave such great assurance and customer service. Once again, thank you for everything.

Thank you very much for your purchase and for your kind review!

Is it hard to install 20” Poe?

It is not, but you much have the right tools if you want to DIY it. If we pre-assemble bypass, then from the tools you need a drill only.

Can drink directly from the tap without boiling?

Yes, with Disruptor you definitely can.

hi bro, replacement cartridges in stock?

Hi, yes, stock is ready.

Just change the old water filter to the US Disruptor set. Reason, low flow rate after around 6-8 weeks.

Would like to thank him for the great service  When i just enquire about something, he is ever willing to share his opinions.

As i'm not brand conscious and he has the components that touches water and the filter cartridges are NSF certified, it's good enough.

IMO, This is the most affordable and effective water filter without bleeding your wallet dry. 😁

Will see how's the flow rate over the next few weeks/months.

Thank you for the review and for purchase! Hope the flow stays healthy for much longer than your previous filter!

Hi !! After using for around 8/9days, was asked by wifey on the flow rate. Even thou it's better from previous (~1.3L/min(new)) to ~1.65L/min(new).
Would like to increase the the flow rate further. Any advise?
Further down the road, would also need to upgrade the system, maybe like additional carbon block that cover slightly different/better spec like NSF/ANSI 53 or NSF Protocol P473. Any of this currently in your arsenal?

This post has been edited by senscents: Feb 22 2020, 09:51 PM