Hey guys,i already flash to merlin 7.9.1 and installed the webshell..after read some post here..is it possible to enable usb in router to connect with hdd?

after send command then what? reboot? or just can click to aidisk?

ahh.. it doesnt work...reboot 3 times also not work..

it doesnt detect my storage..i use fat32 and ntfs format..is it need attach to router before run command and reboot?
or because i flash merlin koolshare 7.9.1 from hgg final directly cause this issue?

Update: i reset factory default and set upback connection..then use webshell with command+ reboot.. done enabling usb

This post has been edited by slayerliar: Apr 25 2020, 04:31 PM

thanks for the help..
but i do wanna know from your experience...
is it stock firmware are better than merlin firmware on our devices?
cuz mostly i do want to know the wireless range between this two firmware

Wait a minute,so ac18 can use 384 now??can share the tutorial and file as i already request for that document

Whats the deal with 386? Any improvement than 380?

Btw..i follow your guide for backup on 1st step..but the command show
-sh: cat/dev/mtd0:not found..

Why ?

Is it because of i not connect through cable lan..just ssh by wifi

bro..ok i can backup the cfe original..now im stuck on the copy paste of macadress. what do you mean with 1:macaddr is your above macaddr+4 .. is it need to add 4 at the back of original macadress? or just simply copy and paste original macadress? im little bit confuse on this.

by the way your tutorial simply can found on 4pda with file prokiller1199.bin..hahaha

sorry to ask again..no need to add 4 right on all et0macaddr, 0:macaddr and 1:macaddr? or only for 1:macaddr as in your instruction state this.