Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed
18 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 tenda ac18, who got firmware

views
     
prokiller1199
post Sep 4 2018, 06:32 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(ks1230 @ Sep 4 2018, 06:24 PM)
hi.. for those who have flash merlin firmware on the ac18..can you guys check whether ai mesh is supported? thanks  tongue.gif
*
AiMesh is a newer thing and it is not in the 380.70 merlin firmware. I did not dare to flash newer one scared have problem.
and also some information, AiMesh is closed source, so right now it is not supported on Merlin, not sure in the future.

This post has been edited by prokiller1199: Sep 4 2018, 06:34 PM
prokiller1199
post Sep 5 2018, 12:57 AM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
I think I broke my c1200 v1 the 5ghz signal is very cacat aha!
prokiller1199
post Sep 5 2018, 08:17 AM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(SilentVampire @ Sep 5 2018, 08:15 AM)
The C1200 v1 is already cacat a long time ago. Nothing to do with you.
*
No now the link speed is terrible and cant get more than 10mps at 5ghz. smile.gif and the whole router just restart after I do a speed test LMAO... I'm just using 5g wds will cause memory leak?

This post has been edited by prokiller1199: Sep 5 2018, 08:34 AM
prokiller1199
post Sep 5 2018, 09:09 AM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(dragna @ Sep 5 2018, 08:54 AM)
What did you do with it until it acted like this?
*
just use my c1200 as a wds repeater and it acting weird until I discovered this problem.
prokiller1199
post Sep 5 2018, 09:40 AM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(Aspick @ Sep 5 2018, 09:37 AM)
Before u configure c1200 as wds, what was the firmware version?

You need to flash to the eu version before configure as wds
*
I am running eu firmware January if not mistaken.

This post has been edited by prokiller1199: Sep 5 2018, 09:41 AM
prokiller1199
post Sep 5 2018, 09:52 AM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(Aspick @ Sep 5 2018, 09:48 AM)
Maybe u accidentally deleted some commands while configuring to wds

Try flash it again to eu firmware and re-configure
*
how aha?
prokiller1199
post Sep 5 2018, 01:02 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(chong83 @ Sep 5 2018, 12:50 PM)
Hi any ac18 user flash coolshare merlin firmware here ?
I flash it but cannot connect to Unifi, anyone can help ? I use wizard setup but not see any choice for Unifi or maxis
*
u nid to find the IPTV setting somewhere at WAN
prokiller1199
post Sep 5 2018, 10:26 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(shamsay @ Sep 5 2018, 10:22 PM)
Dem having problem to connect unifi after upgrade to merlin. Got error Timeout waiting for PADO packet".
*
wut, i did not encounter this problem.
prokiller1199
post Sep 5 2018, 10:36 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(shamsay @ Sep 5 2018, 10:34 PM)
Can connect now after change IPTV port in LAN settings..it will assign to correct VLAN 500 for internet..
*
okok good to hear!
prokiller1199
post Sep 6 2018, 02:22 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(shamsay @ Sep 6 2018, 02:12 PM)
Yeah!any fine need to be done?
*
did ur signal strong?
prokiller1199
post Sep 6 2018, 02:23 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(shamsay @ Sep 6 2018, 02:12 PM)
Yeah!any fine need to be done?
*
did ur signal strong?
prokiller1199
post Sep 6 2018, 03:17 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(shamsay @ Sep 6 2018, 02:24 PM)
Yes. so far ok. still can reach from level 3 from my apartment..i have enabled region All Area
*
YEP!
prokiller1199
post Sep 6 2018, 09:22 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
Anyone notice signal very weird on merlin?
prokiller1199
post Sep 6 2018, 09:34 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(pisces1529 @ Sep 6 2018, 09:31 PM)
Just receive the router today and unable to get into router page with 192.168.0.1.. wifi led and WiFi not working, tried power cycle, reset also no luck. Any sifu got face this issue before or other suggestion?
*
Nope. Who u bought from? anyway it has 3 years warranty.
prokiller1199
post Sep 6 2018, 09:44 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(pisces1529 @ Sep 6 2018, 09:39 PM)
Bought from ookas, has contacted tenda support and they request me to visit their service center to do further checking.

First time buying tenda.. so was wondering anyone got this issue before.
*
mine also from ookas no problem.
prokiller1199
post Sep 6 2018, 09:50 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(shamsay @ Sep 6 2018, 09:48 PM)
No so far..weird like?
*
signal drop, maybe my house too big tho.
prokiller1199
post Sep 6 2018, 09:56 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(pisces1529 @ Sep 6 2018, 09:51 PM)
Can't even get IP from router on all LAN port. Laptop IP shows 169.254.x.x
*
maybe dhcp not on. Can u try this firmware by poking reset port at behind going into cfe upload?
CODE
https://drive.google.com/file/d/0B6Nt8emUcJ4KMUtvbHlVd1hrN0E/view

Tutorial to poke
» Click to show Spoiler - click again to hide... «

follow Part 4 1.1 to 1.6 use google translate if u cant understand.

This post has been edited by prokiller1199: Sep 6 2018, 09:59 PM
prokiller1199
post Sep 6 2018, 11:35 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(pisces1529 @ Sep 6 2018, 11:30 PM)
After multiple attempts with different browser, finally it let me upload and flash the firmware.

Now able to get into Tenda page. Thanks sifus  notworthy.gif  notworthy.gif  notworthy.gif
*
yes this is Malaysia firmware and good to hear that
after I got the ping I also keep refresh to get the cpe page I used chrome.

This post has been edited by prokiller1199: Sep 6 2018, 11:37 PM
prokiller1199
post Sep 6 2018, 11:55 PM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(pisces1529 @ Sep 6 2018, 11:45 PM)
Thanks for the help man.

Initially chrome keep spinning without loading CPE screen, tried firefox and IE both can get CPE upload page but cant upload at all.

Then in the end try chrome again can see the % keep loading.  rclxms.gif
*
haha more try more success! the stock firmware already good but if u want more feature and fancier UI. but I did notice is poor signal by flashing Merlin!

This post has been edited by prokiller1199: Sep 7 2018, 12:59 AM
prokiller1199
post Sep 7 2018, 12:51 AM

Hi there.
*****
Senior Member
966 posts

Joined: Apr 2016
QUOTE(pisces1529 @ Sep 7 2018, 12:44 AM)
You mean try flashing Merlin? Initially I plan to flash Merlin too but abit discourage my unit came in like this  doh.gif  doh.gif
*
actually if just now u want flash straight also can haha since like soft bricked when the router came. so why not?

This post has been edited by prokiller1199: Sep 7 2018, 01:00 AM
« Next Oldest · Networks and Broadband · Next Newest »
 

18 Pages < 1 2 3 4 > » Top
Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0474sec    0.38    7 queries    GZIP Disabled
Time is now: 29th November 2025 - 07:57 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.