Outline ·
[ Standard ] ·
Linear+
The Official iPhone X Discussion Thread | V3, Pick yours up now!
|
yupio
|
Dec 5 2017, 03:19 PM
|
|
Not sure how urgent you need your phone charged. For me I charge my phone nightly overnight. So in fact, I prefer the stock charger as it charges the phone gently. There is no heat and once battery is full, charging is switched off automatically by the stock charger. This way, my phone battery is 100% in the morning and I prolong the battery life by doing slow gentle charging. I don't see the need to fast charge till I have to spend additional hundreds of ringgit for it to get minutes faster.
I am also not into the wireless charging only occasionally charging it in my car's Qi Wireless when battery is low which rarely happens. Wireless charging over long run is not good as it generates more heat to the battery and the electromagnetic wave similar to induction from the wireless charging is not good for the circuitry and componentry in the phone.
|
|
|
|
|
|
yupio
|
Dec 5 2017, 05:17 PM
|
|
QUOTE(nanamizuki @ Dec 5 2017, 05:02 PM) Thing is I dont like to charge my phone overnight, ppl saying that there is auto cut off for charging but I dont think thats the case, previously my iPhone 5 battery got damaged due to everyday overnight charging, whilst my 7+ I rarely (maybe once in a month) I will charge overnight only, check the battery capacity after 9 months still 100% not even degenerate or reduce capacity by a little bit). So I still dont practice overnight charging so fast charging might be a better soluton but dem price for fast charger  But fast charging might degenerate your battery at a rate similar to overnight slow charging if the fast charging is causing heated battery.
|
|
|
|
|
|
yupio
|
Dec 5 2017, 06:12 PM
|
|
QUOTE(adi89 @ Dec 5 2017, 05:17 PM) Im feeling the latest update did not make my phone smoother. Feel laggy and kinda disappointed now. Yes, I am having the same experienced. Feels like the 11.2 is not as optimised as 11.1.2 Opening apps are now slower. At times, I even feels my cellular data is slower.
|
|
|
|
|
|
yupio
|
Dec 5 2017, 10:32 PM
|
|
QUOTE(Lego Warfare @ Dec 5 2017, 10:21 PM) How good is the iPX SQ as a source?
|
|
|
|
|
|
yupio
|
Dec 6 2017, 02:45 PM
|
|
QUOTE(Lego Warfare @ Dec 5 2017, 10:53 PM) Good enough on its own, but still behind in SQ when adding a DAC/AMP into the chain  Thanks for replying, I'm lazy to lug around so many devices when on the go, guess I'll stick to my wireless setup  QUOTE(invisiblelim @ Dec 6 2017, 10:07 AM) which you recommend? I want to have a nice and clear sound while listen to song..  prefer wireless.. Thanks I have QC35 and Momentum 2 Wireless, if you want brighter sound = QC35, if you want warmer and nice vocal = Momentum 2 Wireless. The other models, I cannot comment.
|
|
|
|
|
|
yupio
|
Dec 6 2017, 03:41 PM
|
|
QUOTE(Koichisan @ Dec 6 2017, 03:20 PM) I use Amazon Prime video a lot in Japan so when i see the home bar keeps lighting up in landscape mose i am so afraid that the oled would have burn ins. For me, the bar would disappear after a few seconds. Maybe Amazon Prime is not optimised for ipX yet.
|
|
|
|
|
|
yupio
|
Dec 6 2017, 05:18 PM
|
|
|
|
|
|
|
|
yupio
|
Dec 7 2017, 05:41 PM
|
|
QUOTE(clement5949 @ Dec 7 2017, 05:30 PM) Do anyone of u facing such thing where after u finish ur call, u were unable to tap the end call button? Scenario like this 1. Ur phone ring 2. U answer and face ur phone screen to ur ear 3. U said “bye bye” and face ur phone to ur face (this is the stage where u got to tap the red end call button) 4. U have to tap the screen multiple times only u are able to click the red button. The screen is dark while u are tapping the screen Hope my scenario can make my question clear 😅 Full coverage Tempered Glass with black edges tends to cause this when not installed properly aligned.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 05:03 PM
|
|
QUOTE(memphisto @ Dec 12 2017, 03:45 PM) Hi, I know many of you are using the Hoda clear screen protector but mine didn’t turn out well...I been seeing scratch marks on my iPhone X screen...sadly. Initially was thinking it’s just smudge or stain but look closely it’s not. Shouldn’t it be anti scratch? I would never purposely scrap this but somehow it does happened. Now I’m thinking if this is a good product to use. I'm using the exact same TG, so far no such issue but just after a week, been seeing more fingerprint left on the screen. I thought it was supposed to be oleophobic or something that inhibit fingerprint but very fast wear off. But nothing too serious, a simple wipe will bring back the screen to its luster.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 05:08 PM
|
|
QUOTE(clement5949 @ Dec 12 2017, 05:05 PM) the oleophobic coating usually have 3 months life span but ur case looks like the oleophobic coating fading off quite fast Maybe because I wipe it at least twice a day using wet towel. Can't stand smudges on screens
|
|
|
|
|
|
yupio
|
Dec 12 2017, 05:11 PM
|
|
My other bigger problem is with using Ringke Fusion, at the back there is this bubble effect or some call it water effect seen in between the back of the phone and the Ringke Fusion itself as show in below picture. I worry, if left as such over a longer period, it will leave permanent mark on the phone's back. Anyone using Ringke Fusion having the same problem? Any tips or possible to prevent it? Are those using Spigen Ultra Hybrid facing those same issue as well? Thinking to buy the Spigen if it does not have this issue.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 05:12 PM
|
|
QUOTE(omnimech @ Dec 12 2017, 05:09 PM) If its just water, it wont be too bad. However, if you use those alcohol wipes then gg Just water bro...but not the micro fibre type cloth...just ordinary towel cloth.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 05:53 PM
|
|
QUOTE(memphisto @ Dec 12 2017, 05:22 PM) Hope the pic explain better if not you need to zoom in as it’s glass screen so the reflection is hard to see 😅 Well, even for Hoda, it will still get scratched if it is subject to knock / friction on its surface. At least it protected your phone screen itself. Are you sure the smudge is on the surface of the TG? Can you feel it when you run your fingers over it? Can it be wiped away? Did you remember ever knocking / scratch that area of your phone? Maybe when its in pocket / purse? If the smudge is not on the surface, then I highly suspect it was caused by improper installation of the TG. Maybe the inner side of the TG had been touched somehow. Lifting it and applying some cellophane tape may remove those smudge but expertise needed to do it properly and not damage the TG.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 05:54 PM
|
|
QUOTE(waikin_31 @ Dec 12 2017, 05:17 PM) Anyone here noticed iPhone X wifi is slower? I had iphone 7 plus and after many rounds of speed test, it's confirmed to be always slower... Tried connecting on same wifi network and also to Maxis cellular same issue. iPhone X always had slower connection. She also noticed this on day to day use.... I only noticed Wifi and Cellular data both slowed a little after I've updated to iOS 11.2 before I was on iOS 11.1.2 and it was fine. I also have iPhone 7 Plus and both my iphone 7 Plus and iPhone X being Intel chipped, should have identical speed. It was so when its running iOS 11.1.2 but became slower after iOS 11.2 This post has been edited by yupio: Dec 12 2017, 05:55 PM
|
|
|
|
|
|
yupio
|
Dec 12 2017, 06:03 PM
|
|
QUOTE(waikin_31 @ Dec 12 2017, 05:56 PM) Hmmm...my iphone 7 plus was also on latest 11.2 public but had no issue, unless it could be due to different model. Hmm...I am not sure about that and haven't used my iPhone 7 Plus ever since I have my iPhone X. But the moment I upgraded to iOS 11.2 in my iPhone X, I immediately felt the lag / slowdown. It is quite pronounced. So I suspect its rather the iOS not optimised issue rather than hardware itself. Was very fast and snappy before. I even noticed all pictures appear instantly at the same time when I open my email. It is just not like that anymore. Sometimes I see white screen for a while before content appears.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 07:39 PM
|
|
QUOTE(nanamizuki @ Dec 12 2017, 06:57 PM) Safe to tell u guys that Spigen Ultra hybrid dont have such issue, am also a ringke user before on 7+ on jetblack and the bubble issue in unbearable. Glad I go with Spigen this time around Thanks for replying. I’m gonna go for the Spigen too then.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 07:40 PM
|
|
QUOTE(vez @ Dec 12 2017, 07:22 PM) mine dont have problem from 11.1.2 to 11.2, seems batter improvement on 11.2 to my ipx  Hope the next update will solve my problem.
|
|
|
|
|
|
yupio
|
Dec 12 2017, 07:43 PM
|
|
QUOTE(nickywan123 @ Dec 12 2017, 07:41 PM) You can take a look at UAG cases, pretty good as well. I'm using one myself. I thought the UAG would be a tad bulkier no?
|
|
|
|
|
|
yupio
|
Dec 12 2017, 09:05 PM
|
|
QUOTE(nickywan123 @ Dec 12 2017, 07:53 PM) They have slim cases as well. Their bulkier version is not as bulky as Spigen's tough armor to be honest. I'm using the Pathfinder series, it doesn't add much weight to it and offers more protection. It's all up to your personal preference actually. Thanks for suggesting bro but I’ve just paid Sakurazz for the Spigen to be shipped to me. Will see how the Spigen goes first. 😊
|
|
|
|
|
|
yupio
|
Dec 12 2017, 09:06 PM
|
|
QUOTE(dikae @ Dec 12 2017, 08:47 PM) No it's the buttons I'm talking about...I spent an hour doing some testing (OCD kicking in lol). Very weird outcome... 2 same phone and same casing, but side button (power button), one feels very normal and clicks when I press...another one doesn't feel much and less clicky. However when I remove both phones bare without casing, but buttons work exactly the same (clicks and normal) Put back casings on and swap casing, but my button still doesn't Have the clicky feel....(very light sound when pressed and doesn't feel the button as much) Sighs  Means the casing are not consistently made. Nothing to do with the phone. May I know what casing is that?
|
|
|
|
|