Hello, we checked with HQ - seems that DSL devices are not affected.

hi,

i have dsl 2750e and dsl 2730u and problem now is when i use 2730u everything work good without DC, but when i change it to 2750e, it DC a lot when play game.Both connect ADSL mode are (2730u = g.dmt) and (2750e = t1.413) , i did try ADSL2 and 2plus also the same ,that is 2730u all working well but 2750e gaming DC a lot.
WHY ?
Can i flash 2750u firmware into 2750e ? because 2750e firmware is outdated (now using sea 1.03 HW:T1).

thank in advance.

Thank for the advice,but where can I get this sea1.10 ? Because the dlink only have sea1.01(2013) and sea1.03(2014).any links for download? Thank you.

installed 2730e firmware from dlink my website...and it bricked my modem, lel?

is this DSL-2750E model consider good enough for 8Mbps streamyx?

I using LAN cable for my xiaomi tx box but it always stuck at buffering from time to time and potong steam. And i have 3-5 devices connect through wifi to the modem, is the model cannot handle the workload?

No idea why, this feel very weird...

Are you still connected to the internet?

Can you still ping to 8.8.8.8/8.8.4.4 when the issue happen?

the D-Link Dir-850L given by TM, not sure due to the Realtek Chipset or D-Link Design, the wireless ping would always higher than wired ping by around 3ms, pinging ip example TM own ipv4 1.9.1.9 and ipv6 2001:e68::b:68 or any other ipv4 and ipv6.

the client was same room with the wireless router, there is no interference at wifi, speedtest was be able to reach full speed.

the D-Link DSL-2640B given by TM for streamyx previously, also have such issue, the wireless ping would always higher than wired ping by around 3ms, pinging ip example TM own 1.9.1.9 or any other ip.

Hi D Link,

My DIR 850L is not functioning. I tried to scan for SSID, both 5 Ghz & 2.4 Ghz was not available. I tried to configure the modem via LAN, but my LAN port doest not detect any connection from this router.
The only light that is ON is the POWER light. But sometimes after I turn it off, the globe icon blinking with orange colour

I would like to share some problem and solution I found to all. My model is DIR-878, may apply to its sibling model.

Problem - getting capped at 200mbps instead of 800mbps download speed. Yup, unifi turbo just rolled at my location.

Solution - Under QoS Setting, remove any device linked to the priority table. My speed was capped even when I put my PC in Highest priority, once I remove it from the list, it can download at 800mbps.

Note - all testing is done in gigabit network with CAT7 cable. No hardware limitation here.

Side note - I need to pay unifi personel (will appear in my bill) that come to my home to check this, cause the problem is caused by my side, not unifi. I have them come with their router and tested running at 800mbps.
On the other story, while setting my router, I use the old IE, everything was ok, except VLAN pages failed to load, no error whatsoever, just a blank (the rest of the menu and logo is still there). Then I use chrome, whenever I try to apply setting, it will ask for my router password and restart the whole procedure again.... however the setting wasn't applied. While using chrome, I can see like few hidden setting on the menu, but unable to access it (this wasn't appear at all at IE nor edge). Lastly, everything when smooth with Microsoft Edge... Any idea how is this happening?

Does anyone know if the latest D-link DIR-842 (Rev C2) router provided by Unifi can flash with diff firmware??

Main concern is to remove the @unifi suffix for the wireless AP so can share with my existing Asus router.

Hi

This wifi speed from dir-882, about 4m from the router, average simen wall. package 300mbps. device note 8. average 2 person at home and using the broadband. no torrent and download activity during that speed test. max wifi speed (due to the limitation of the device) is 866mbps. you can see the drop in wifi speed just only on that distance.

Dlink router is crap. firmware total crap.

Yes bro. Those customized firmware are crap.

But i still prefer other brand UI than DLink

Have some question to ask for D-Link technical support, I got a D-Link DGS1016D and been used for more than 2 years already. Currently my unifi was turboed to 500mbps. Previously is using Asus RT-AC55UHP then now was upgraded to Asus RT-AC86U. I'm not so sure this problem is happened before upgrade or after upgrade.

When I plug to a megabit router, usually the gigabit switch is showing in yellow light. The problem is, when I connect to my gigabit switch will cause my megabit router download speed was limited at 10mbps download speed but full speed 100mbps for upload.

However, there is no problem when I plug with a gigabit router to do as access point. The download speed and upload speed all in normal. Nearly full speed for both 2.4Ghz and 5Ghz. 2.4GHz around 80~90mbps download speed and 5Ghz around 400mbps download speed.

May I know what is the problem for my gigabit switch? For the 10/100 LAN issue.

I was noticed that, when every megabit devices got this abnormal issue as long as that devices are connected to my gigabit switch as yellow light.

just 2 days only dah overheating? 

got my DIR 882 from TIME. But it seems like the wireless connection keep disconnected every 15 to 20 min. Its annoying even though it auto reconnects back. Please advice is it anything to do with the firmware? Current firmware is 3.5.8TT. Please advice