Outline ·
[ Standard ] ·
Linear+
Unifi Official TM UniFi High Speed Broadband Thread V32, Enjoy Your Speed Upgrade
|
biloxee
|
Dec 24 2017, 06:09 PM
|
|
QUOTE(sgpdsmss @ Dec 24 2017, 01:16 PM) what's the speed test result for link speed at 114Mbps and 144Mbps ? Pls try go far far to get less than 100Mbps link speed and speed test again ..see the result ... i using redmi note 4 ...link speed Max 72Mbps for 2.4GHz.. no matter how close to the router ... i think i cant get over 70Mbps for speed test under unifi 100Mbps finalize may due to device limitation on 2.4ghz instead of router issue ... thanks You need to consider how many antennas your device has and/or if it supports MIMO. Router cannot help if your device cannot support the speeds the router is capable of.
|
|
|
|
|
|
biloxee
|
Dec 24 2017, 10:10 PM
|
|
QUOTE(sgpdsmss @ Dec 24 2017, 08:51 PM) yes..now i admit ..my redmi note 4 .link speed connected at Max 72Mbps only ...so that i cant get 8x~9x of 100Mbps on 2.4GHz wifi.. even i bought high end router ..expensive router ..did perfect setting ..link speed Max also 72Mbps ... even surrounding not congested..without any Electrical devices in my house ..link speed also Max 72Mbps ... thanks ...  My old iPhone 4s with single stream antenna, can't even reach 50Mbps on 2.4Ghz even when it is next to the router  So, when my Unifi gets upgraded it will probably do 40+Mbps up and down...
|
|
|
|
|
|
biloxee
|
Dec 25 2017, 12:58 AM
|
|
QUOTE(sgpdsmss @ Dec 24 2017, 11:07 PM) may i know the link speed on your old iphone 4s for 2.4Ghz wifi? thanks... iPhone don't provide that kind of info.
|
|
|
|
|
|
biloxee
|
Dec 26 2017, 10:01 PM
|
|
QUOTE(mostwanted82 @ Dec 26 2017, 04:55 PM) guys, any of you on 100mbps encountered speed slow down to 60-70mbps after few days? Each time i re-connect again then the speed back to 110mbps... i torrenting frequently btfan, vez, and chaos32 reported similar problem.
|
|
|
|
|
|
biloxee
|
Dec 27 2017, 10:11 PM
|
|
|
|
|
|
|
|
biloxee
|
Dec 27 2017, 10:21 PM
|
|
QUOTE(SzeMeng76 @ Dec 27 2017, 10:13 PM) Thanks bud. Have to check my settings...
|
|
|
|
|
|
biloxee
|
Dec 28 2017, 12:05 AM
|
|
QUOTE(fruitie @ Dec 27 2017, 10:27 PM) QUOTE(watabakiu @ Dec 27 2017, 10:43 PM) Thanks. Manage to fix it...
|
|
|
|
|
|
biloxee
|
Dec 28 2017, 09:57 PM
|
|
QUOTE(Moogle Stiltzkin @ Dec 28 2017, 07:18 PM) sounds like cap followed by auto throttle based on the description did they change from unlimited to a monthly data cap prior to throttling or something? I'm not sure. My upgrade is only scheduled for next week.
|
|
|
|
|
|
biloxee
|
Jan 1 2018, 09:18 PM
|
|
QUOTE(JohnLai @ Jan 1 2018, 07:57 PM) So...regarding my question from few days ago, nobody experience slowdown from France server using unifi? France - very slow. http://centos.mirrors.ovh.net/ftp.centos.o...inimal-1708.isoGermany http://mirror.eu.oneandone.net/linux/distr...inimal-1708.iso
|
|
|
|
|
|
biloxee
|
Jan 1 2018, 09:46 PM
|
|
QUOTE(JohnLai @ Jan 1 2018, 09:31 PM)  Darn it. It happened on 25th December 2017*. What with TM routing. I can get full speed from France OVH if I connect to Australia and New York servers to access France OVH server. But I only get 15-22kb/s if I connect directly without using proxy. ? https://twitter.com/OVH_Status/status/945193655228403712
|
|
|
|
|
|
biloxee
|
Jan 3 2018, 05:09 PM
|
|
Finally...  @ 2.4GHz with 300Mbps link to TP-Link C1200  Top 2 is mine, the rest are neighbouring networks
|
|
|
|
|
|
biloxee
|
Jan 3 2018, 06:50 PM
|
|
QUOTE(#Victor @ Jan 3 2018, 06:07 PM) How do u configure router to 300Mbps link speed? Enable 40MHz channel width, and your device must be able to handle 2 spatial streams (2x2)...
This post has been edited by biloxee: Jan 3 2018, 06:58 PM
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 06:58 PM
|
|
QUOTE(JohnLai @ Jan 4 2018, 12:58 AM) I posted this in this thread just in case if people don't see the post at other thread..... K, lady and gentleman....who is willing to test BETA firmware that might fix C1200 V1 (EU) random restart issue? http://forum.tp-link.com/showthread.php?10...ll=1#post227255Archer C1200 (US) V1: http://support.tp-link.com/f/ff5667e274/?dl=1Archer C1200 (EU) V1: http://support.tp-link.com/f/83ec721f22/?dl=1Thanks for this. The GUI is more responsive than the stock and TIME f/w. The TIME f/w got no f/w upgrade menu. Regret not reading carefully and installing. Luckily, I found a way to access the f/w upgrade page to change the f/w...
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 07:09 PM
|
|
QUOTE(tientien @ Jan 4 2018, 03:57 PM) Guys just got the 100m upgraded after complaint to mcmc, however i get the 100m n jumbo pack but not the free std20 voice n i also din see the rm50 special discount. I live chat with tm, at first the lady said free voice call will include if i did request but later change statement said only for those who had that package before upgrade which i clearly stated in my report. N the rm50 discount only will know once my bill generated. Last she said will pass to repective dept to check, i requested ticket no if need to furrther with mcmc again, she just gone like tat. Any advise wat can i do? Check again tommorow. Mine was upgraded yesterday and when I checked online yesterday, the STD20 Voice and the $50 Special Discount was not there as well. I was planning to call today to complain but I decided to check before calling and it was all there. They must have updated it again...
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 08:16 PM
|
|
QUOTE(Jjuggler @ Jan 4 2018, 08:06 PM) I've downloaded the beta firmware of c1200v1 EU and might give a test on the router. Try it...
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 08:37 PM
|
|
QUOTE(JohnLai @ Jan 4 2018, 08:21 PM) Did you install that beta firmware? I installed the beta firmware and the first thing I noticed......the firmware boot up in 2 minutes instead of usual 4-5minutes *THIS BETA FIRMWARE RESET EVERYTHING.*In case if one is lazy in reconfiguring all the stuff, please make a backup of your configuration so that you can load it into the router once the firmware upgrade is complete. Yea I did install it. But the Beta f/w if select UniFi MY, it will set IPTV to LAN 1 and the previous f/w IPTV was LAN 4. So, I didn't restore my backup...
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 08:42 PM
|
|
QUOTE(JohnLai @ Jan 4 2018, 08:40 PM) Just select custom. Phone 400 Internet 500 IPTV 600 IGMPV3 801.1Q Tag Any LAN port. Yea, I selected Custom and set it to 4...
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 09:57 PM
|
|
QUOTE(JohnLai @ Jan 4 2018, 08:50 PM) So.....I have been torrenting with 600 to 800 connections at 50Mbps for 5 hours....... So far, the router still hasn't randomly restart yet. Last time it auto-reboot randomly if total connection is more than 80. Initial impression with this new firmware: 1) Fast bootup = 2 minutes 2) Can handle 800 connections from bittorrent client without random restart immediately (5 hours + and counting). Still waiting to verify if the random restart still happen...... 3) -.- Hate the beta wording on background.....haha.....  What you download for 5 hours?
|
|
|
|
|
|
biloxee
|
Jan 4 2018, 10:17 PM
|
|
QUOTE(JohnLai @ Jan 4 2018, 10:01 PM) For example, 4K porn?  Porn I just stream. No chance to watch on TV with loud volume...
|
|
|
|
|
|
biloxee
|
Jan 5 2018, 12:25 PM
|
|
QUOTE(Chrono-Trigger @ Jan 5 2018, 07:52 AM) anyone has any idea how to setup ipv6 on Archer C2100?
QUOTE(m3lover @ Jan 5 2018, 08:59 AM) Sorry guys, how to check my C1200 version 1 or version 2 ?
This post has been edited by biloxee: Jan 5 2018, 12:32 PM
|
|
|
|
|