70% power target.

Maybe its because temperature too high?

Hmm, your PSU can supply enough power to the card?
1070 that I bought recently with micron chip can oc to +650 ok wor.

Installed NiceHash Legacy for my RX570, while benchmarking my Antivirus kept popping up many different virus/malware warning.

Anyone facing the same problem?

Anyone mined Monero using their CPU?
https://www.coingecko.com/en/coins/monero/mining_calculator
The wallet has mining feature, but cant join pool

Guys, should I report my neighbour who is mining and didn’t do something to reduce to noise pollution? My family is affected by the noise whole day and night, causing loss of sleep.

Report to town council? Thanks!

hello sifu sifu sekalian, currently running on 850psu with 1060 6gb x 2. should be no problem to add one 1080 rite? hehe cause power consumption for 1080 is 140w.

so total 140w + 200w (2x 1060) + 150w (other parts) 490w. still less than 70% consumption of psu considered ok?

Depends, if you have the time then you can fiddle around with overclock and lowering of power target.

Depends on the card, and what you want.

You stay on stock it usually runs hot, and there's a certain amount of power draw.

By lowering power target you get better efficiency.

Better efficiency means lower maximum hashrate of course, but it means your hashrate per watt is better.

Your cards also will run cooler, less noisy.

About the temperature part, it varies from chip to chip and cooler used.

My GTX 1080 for example if I let it run stock then both likely to reach around 80c range. Running both, I get about 1000 - 1100 sols. System power draw 380W from wall.

By reducing PL the draw is only around 310W, still get around 920 - 950 sols

950 / 310 = 3.06 sols per watt
1100 / 380 =2.86 sols per watt

Very slight different on hashrate (hence coin gained) but it's straight 70W difference on the bill, and if go beyond the low limit tariff it incurs additional running cost. Furthermore going at lower PL means the card is less stressed (lower heat) and fan also less stress, overall last longer.

Again case by case.

btw what's your situation? This thread moves so fast, hard to track.

Closed casing. When you run single casing with 2 GTX 1080 inside do mining, how to not hot? Even gaming temperature of GTX 1080 is around 80c range.

Oh forgot to mention 80c I wasn't running at max RPM.

GTX 1070 / GTX 1070 Ti / RX 580 / RX 570 produces less heat that's for sure.

You should see how we mine using HD7970 / R9 280X last time. 275w cards, max RPM also still 80c - 90c levels.

2x. They're powered off as of now. I mine on and off type.

Yeah...all dropping now. Hopefully this stabilizes the GPU prices back to normal. Pity those who bought GPU at high price from scalpers.

can share some views on this setting?...so far running good

Hi guys,
Just got into mining, started with 2x1070.
I'm just following whattomine website and going with nicehash neoscrypt at the moment.

Just curious why eth mining is the main topic even when Nvidia cards are used? Is it because of the dual mining thing?

Well, I see got people building rigs with 1050ti in the shop. So much desperation for GPU...

Hi wong,
Thanks for your earlier reply. Yes I just return from lowyat, no stock whatsoever unless you grab a bundle (and they only let you buy 1...)
Outskirt shop got chance to get?

Hi

Just wondering foe mining if i buy nvidia 1080 and 1080ti,would that be problem? Also do i require to buy from same brand as well?

Thanks

hi guys I have question on gc:-

1.does the memory in the gpu will effect the hash rate ? some gpu like 1080 is 8gb,while the 1080ti is 11gb.

2.is the output for self assemble 8x Rx570 and Bitmain g2(using Rx570 220Mhash) is the same ?

3.would like to know which brand would u prefer Nvidia or Rx considering they would imposed PoS on ETH ?

4.max card I can for Nvidia is 6 and rx is 8 ?

thanks