[deleted]

This post has been edited by holynoob: Oct 3 2024, 11:24 AM

can you quote black out curtains 8ft (w) x 7ft (h) x 2 pcs; and 7ft (w) x 7ft (h) x 2pcs

Hi YCS,
I've pm'ed you.

What is the best setup for a corner window? Separate the railing or use a single curved railing?
For blackout curtain with a sheer curtain using French pleat hook



This post has been edited by Human Nature: Oct 25 2024, 12:01 AM

Hello,
We normally use single curved railing so that there's not gap in between the edge of the windows.

What is the ratio for the curtain tape? Let's say for 1 meter window width, how long should the curtain tape be? Using 4 prong hook for french style pleat. Many thanks

This post has been edited by Human Nature: Oct 25 2024, 08:39 PM

Hi,
It depends on the 'fullness' of the curtain you wish to achieve. the general guideline is between 2.5- 3 times the width of the windows.

New Job completed for Mr Kxx from LYN in Mt Kiara. .
Thanks for your support!

Blind(s)man How high should a curtain rail be from window/sliding door grill? Thank you

It depends on the your windows dimension and the clearance above the windows. Feel Free to share the photos of your windows and I'll be able to advise.

thanks, already placed it 6 inched above the grill

what is your opinion of installing curtain rail on concrete ceiling? what chances of the screw fall down after many years?

I have sliding door with rail screwed to ceiling. after 3 years, many screws fell. I hate to maintain it.

have you encountered rail installation on plaster wall? you will locate the metal structure and screw onto it? can screw to thick metal? example of my mezzanine floor and one side of wall frame below. can screw to the metal vertical black bars?



This post has been edited by Skylinestar: Dec 27 2024, 11:50 AM

Hi Skyline,
We have installed countless curtain railing on plaster ceiling and i have not receive any feedback of screw falling off so far. I believe your case may happen due to:
1. improper installation
2. the plaster celing was not properly reinforce to support installation of curtain railings.

*We have not installed on metal bars so far as all our railings are installed on plaster ceiling ( for ceiling mounted curtain railings)

Blind(s)man what is the curtain tieback height that you usually installed? From internet, almost all recommended 1/3 from bottom of curtain. On the other hand, many real life curtain pics show about 1/2 from bottom. Thanks

There's no hard and fast rules on this. the height of your tieback also depend on the height of your curtain. we normally install 10-15cm above the height of a door knob.

Selamat Hari Raya everyone! Please expect delay in response as we'll be back on 2nd Apr.

Maaf Zahir & Batin.

Hi sir Blindsman

I'm looking for a set of pleated blinds, something like what Ikea has here:
https://www.ikea.com/my/en/p/hornvallmo-ple...om-up-10541615/

Do you have anything similar and whats your pricing/ measurement like?

Hi Blindsman

My current Master Bedroom and 2nd Bedroom track curtain railings (as attached floor plan ) are :-

1. Straight curtain rail

2. Double track (ceiling-mounted)

I plan to make the following changes:

1. Install a corner piece connector for the double track

2. Install a white sheer curtain

Please PM me with pricing details. Let me know if you need any further information.

Tq


Attached File(s)
 Curtain_Railings.pdf ( 49.45k ) Number of downloads: 45

Hi there,
We only have zebra blinds, roller blinds (sunscreen and blackout)
Kindly pm me your windows dimension w x h in ft and I'll be able to quote you ya. . .

HI Rudd San,
Kindly pm me your windows dimension w x h in ft.