only band 3 available.. switch others wont connect lol

lol solar power..... it was just avoid the barrier between the premise and the cell tower.
when there is no blocking, the signal get boosted.
solar is one of the idea where cell transmit thru sun light

there no b3+b20 right ?
u try set it to b3+b7, this is the LTE-A used by DIGI as i know

only E5186-22s will support LTE-A, which more expensive than usual modem

my area no LTE-A facility yet... only got b3 i get connection..

This post has been edited by alexchew_2020: May 12 2017, 02:34 PM

Then how come your B310 has B3+B7 balanced mode?

Also, you say you can get 80Mbps in LTE-A area. I am assuming it is not on B310 right?

This post has been edited by kaiserreich: May 12 2017, 02:42 PM

just selection only...lol...

if u are in LTE-A area, if in 4G mode i think u also can get good speed.

the internet speed are unstable... when is slow is 5mbps...
when it fast.. can get >10mbps..

anyone here use the RJ11 port? is there setting needed? telekom phone can use?

the tool i use is from e5186, and yes i can only support LTE speed which up to 150mbps.
my area doesnt have LTE-A coverage but the coverages is 200m away from me.
What i try is i make the setting to maximize my speed as possible. B3+B7 is the technology used by most telco to achieve LTE-A.
As u can see they use a mixed band to get it.

The 80mbps is on my iphone test and not on modems. sorry for doesn't list properly.

anyone else using B310

try to ping wifi with device 192.168.8.1

can get latency spike...

is it setting goes wrong?

yeah if you in LTE-A area, your so called 4G modem will able to get better speed than normal LTE.

i didnt have this issue. 0% loss
<1ms

i have lose... not sure if my wifi problems or device problems.. after work reach home test my laptop... & try reset the device see if could fix.. if cant fix then modem problems...

normally is 1ms ping only..wont have any loses.

try to change the wifi channel and see.

Do you know the antenna settings?
Put auto ? built in? or external antenna?

Have anyone try change the DNS on huawei router?
The dns usually in DHCP tab but this time the DNS is under Ethernet setting.
In order to edit it, it haves to change the connection mode.
default is set to AUTO.
Anyone have idea which to choose ?

Pundek TM... after my fren follow my decision to go cut his TM, the TM team leader there suddenly take interest in his termination submission, and counter offer a latest latest latest just out oven plan (so they say), called YB Unifi for 10mbps at rm129 without setop box or free calls. Free calls is rm149 (meaning same like previous VIP10 lar) Diu,... This is fiber optic and the team leader says this is special offer, even my staff here also don't know and cannot offer...

In my heart I was thinking, this is a big company or small company? Make such counter offers, they obviously never learn the maxshit story.

dont know i put auto only...

i cant get the phone port working..any setting or plug n play?

not special offer la... current unifi lite is @RM129.. addons voice call is optional.