Btw, the operation = change engine, the original engine spoiled, piston "senget" already because water enter to the air filter then enter to the engine piston

I don't feel the current gen Avanza spring as soft .

But whether it is as stiff as first gen spring, IDK ?

You mean measure with tape ? Measure point A (where?) to point B (where?) ?
This is in relation to spring stiffness ????? or you  mean alignment thing ?

Oh, I get what you mean .
Tyre centre to foreward fender (horizontal) : LHS is 382.2 mm and RHS is 382.2 mm .Balanced .
Tyre centre to rearward fender :LHS is 386.2 mm and RHS is 392.2 mm .Unbalanced .
Front bumper had minor langgar backside of front car , not serious and car still drivable after minor accident .

Front sets of shock absorber, lower arm, stabiliser link, tie rod end and anti-roll bar bush set all had been replaced several weeks ago , as reported at bottom of Post #1 here .
So, it can't be unequal geometry .

take it back to the shop you did the alignment and tell/show them your problem and let them fix it.

just replace rotor TRW brand last sunday.
sympthom to take note of:
-squeling sound even though replace brand new brake pad.
-loud clunk sound whenever come to a stop or when releasing the brake from standstill.
-a lil bit of softness feel when braking.

Redo (foc) wheel alignment again , pulling left problem now is better than before ......
but steering wheel is not centred ..... ......

2007 Avanza 1.3L was said to be 5.5 .
1.5L was said to be 5.1 .

Hi all sifu, my car avanza 2005 m,  does any one encounter air filter soaking wet?  How the water go in the air filter?  Izzit from the filter box?  I have check there's no crack or hole, pls help thanks

I think oversteer will roll over. If raining day u feel oversteer possible due to lost of traction.

I checked back a past post and noticed that I have typed the brand name wrongly because everytime I search for Greber, it seem to come out as red colour absorbers whereby mine is yellow. Last I noticed my shock absorbers are called Gabriel after checking further and confirmed the sticker location on the yellow absorber with the link below. Sorry ladies and gentlemen for the confusion all these while.

https://shopee.com.my/-1-Pcs-Gabriel-Caston...2771.5933341144

Bought from zhapalang motorsports in Kepong last time

For auto gear box filter. How often we need to change it? At what mileage?

i think u get it wrong
in order to reduce oversteer, u inrease the rear tyre pressure instead of the front.

just a reference here:
https://m.tirerack.com/tires/tiretech/techpage.jsp?techid=58