Ayoo.. that store a bit expensivelah. And then shipping cost also RM8 minimum lor. Just to compare their thin Premium Glazz tempered screen protector is RM139. In lazada vendor only RM109

Better lazada vendor 'Red Design' a local supplier in PJ iirc. Cheaper product and free shipping to boot.

I did read from some other forum that a few people have this issue, and was due to smudges on the button area. Cleaning it up did the trick. Some did a reset which is the power and volume up button also cleared his issue. And another you could try would be clearing the ram, i.e. press power until the off slider appears, let go of the power button, then press the home button and only let go when the home screen reappears.

If all the above fails, most probably due to a offending app. Did you install any apps recently? Sometimes, apps can also make the system gila2 one. Delete it and reinstall again.

Lastly a full restore. If its still persists, a trip to a sc is advised.

Bro I don't get what you mean? Can give more detail of your issue at hand please.

Good If the clearing ram works, then you must have alot of apps open in background and also that the background App refresh probably have too many apps to refresh. See the list and disable those that not needed such as weather app or youtube app etc etc.

By double tapping and closing the apps do release the ram, but it does take some time to release it, not instantly. i am assuming that its due to the syncing of the data cache and temporary data which will be sync together with iCloud. Its not like it takes minutes, probably several seconds, but those seconds does matter. Anyway, just have to work around it, I guess but still the ip7 is the best experience for me as it is soo bloody fast.

i don't think so bro. Only at certain telco that do take trade ins. There are FB Malaysian groups that do sell their apple stuff. Since yours is ip6, I am sure alot of interest.

Most of the time sure sold out. And if you go contact the seller, sure got available but the price is almost retail oredi..

High graphics games do take a burden on the processors which accounts for the extra heat generated. Does your phone cool down when not playing? Mine also gets hot by just playing boom beach. There shouldn't be cause for concern. R u using a case? Some cases don't really dissipate heat very well.

Having good results with Spigen Glazz. RM103 and there is 2 tempered sp in the box. Easy to apply and the bezels are chamfered and rounded. Application also doodle with little or no bubbles which is also easy to ease out.

shouldn't need to apply pressure to activate the cc. Normal swiping action would do. Do you hace a screen protector? SC also can effect performance.

Are those local set? If import set, must be weary on the unit and also warranty by supplier/vendor or manufacturer bro.

Best get from local telco...

When choosing chargers for your electronic device this is the pointers:-
1. Voltage must be the same as the device requirement. e.g. iphone 5V

2. Current, more mean better for charger. As for device, the device will only take what it requires. e.g. charger 5V, 1A. Device 5V, 2.4A. So invest with a charger that is capable of producing more than 2.4A so as the device can fully utilize its charging rate. So less time charging.

3. High current charger also useless if the cable used is not capable of delivering the current. So invest in proper cables too. Those certified braided high current cables although expensive but IMHO worth it and you only need to buy 1 or 2 depending on your needs. They will last for many years.

4. Do invest in a certified charger/cables that have overload/temperature cutoff etc that will protect and feed proper/clean power to your devices.

Ok Bro try the following if you haven't.

1. Clear your RAM. Presss power button and then release until Power slider appears. Press home button until home screen reappears.

2. Soft Reset. Press the power + volume button together until the apple logo reappears.

See how..

Spigen Glazz bro. RM103 - 2 pieces in box. I'm using this one. Spigen is SGP.

ALOT of Difference bro. For Non-Local set, Apple M'sia will not honour any warranty. Usually, these non-local set are brought in by suppliers which are imported unlock sets so can use with any mobile system listed in their GSM specifications. Price wise, they are generally cheaper compared to the local sets mainly due to the exchange rate and/or sometimes these devices were bought during offers etc.

In lazada, 11Street etc, do check carefully what warranty is being offered. Most often those below retail price are import sets with Supplier Warranty. This means, any issues with the unit, its back to the supplier. If you send it to Apple Malaysia, repairs won't be free, that and if they do accept your unit.

The download rates are quite sparodic lately. I was using 4G this past few days, but today also got some speed issues unlike the norm.

The imei number should be printed on the box. IIRC there is a section on the apple website support where we can check the detils of the phone from its imei number. Should be under the support section of apple.com

Its usually less than 2 hours, and its definitely faster than using the 5W apple charger and cable.

You also need to understand that 0% - 80% capacity, the device will be charging at full speed. When the capacity reaches 80% the charge rate will be trottled down and finally at 95% it will go down further to trickle charging. This is done to safeguard the battery in the long run.

Anyway, I have been using an ipad charger to charge my ip4, 5s, 6, 6+ and 7 with no ill effects . and apart from the ip7, the rest are all >more than 2 years old. So long as the power feed is stable and clean, it should be good for the device. I also have one of those Pineng 11200mah power banks. But when ever I use the ipad charger to charge it, it still needs a solid 10-11hours for full charge. This means that the device circuitry can only receive max 1amp max current. Power bank nowadays expecially those with Qualcomm 3.0 can take much higher charge rates thus minimising charging time tremendously.

I am using the spigen case which was another reason I opted for a spigen sp for the sake of compatibility and fitment with the case. So far so good. I am getting all functions, 3D touch, etc with the sp.

Quite pricey IMHO. Furthermore its pushing total 7A into 4 ports which equate to about 1.75A /port. The Aukey chargers provides 2.4A charge rate and they are cheaper too.