boohoohoo.....
it's hampering my spirit la....

trex is too costly...
nvm la...
let this one be the starter, to learn the necessary basic skill first...
if it's that hard then if i can master it, should be no prob to handle others
hehehe

go look for other ppl flying nearby u or your place .. ask for their advice on HOW TO and WHAT TO ..

No hardcore training...... is up to some contract work... so kinda busy... while lefting my heli to collect dust...
Contract will end this month... so can continue in the hobby after that...

Megastation finally got the 250se... will get that soon if i got the budget later on...

finally got liau ah ??
i went on tuesday oso did not see one ?? i go check it out .. hahahaha

Hello Everybody ,

Newbie reporting in......

please go visit your nearest fly site and find more info there .. the EXPERTS like FX20V can help u all the way .. hehehe

hmm
probably TS can put up a list of 'airports' on the front page so ppl can go hang out or fly

TS disappeared already
its just a few of us posting in here sometimes ..

oooh
i see.....

u can go to this place and try to find what u need ... http://www.my-rcflyin.com/

looks like going dead again this place ...
flying helis is dangerous ..
flying helis is expensive ..
flying helis can be frustrating ..

so why do we still do it ???
coz its FUN FUN FUN !!!

Fun~~~~!!!

aarrgghhhh ... DSM2 lost signal this morning ... and its only like 300m away .. WTF ????
was following another fixed wing in formation .. then mine just suddenly no more response and went straight down
then other fixed wing was running FUTABA FASST system

So much difference? What RX is that?

dsm2 ar6250 .. full range made for carbon fibre fuselage
and i am not even using carbon fibre fuselage.. only foamie plane
lucky crash not very bad still can be repaired and flyable within 1 hour .. hahahaha ... but would still like to know or try that spot again and see if will lockout again ...
previously another futaba 6ex running on FM oso lost signal around that area .. but the futaba 2.4ghz was ok and my dsm2 was not ... hmmmmmmmmm

I can't piro flip with any r/c helicopter but i can hover badly setup Esky BCP...

i cannot do piro flip and cannot hover BCP coz i dont have BCP ... hehehe

Wah Master in LYN heli forum also....

hi...newbie here...and i need some help...
it seems that my voltage regulator on the heli circuit is busted...the circuit works, all the led's are working, but the motors don't want to spin...
so, here i am requesting for help from the LYN masters..anyone can help me fix this thing??


this is the circuit...arrow pointed at the busted vr...


this is my rc heli...cheap model only...

sorry .. no idea at all laaa