1.525vCore
2.300vDimm
other voltages = default

Thx soulfly, 290MHz is not bad. Have u tried to get above 300MHz?
Btw, where r the other forumers that bought this mobo from jy14?
Pls share ur result here..
TQ

I'm using this board...its good...

best matx mobo for am2? i'm sure it isn't for now
half year ago maybe yes

How did you modify the part number ?

I wonder, is this mobo performs well in gaming..?

To tell you guys the truth, the term 'gaming mobo' is just a marketing gimmick. Any mobo can be used for gaming, it all depends on your cpu and gpu power, as well as the amount of ram you have.

A super expensive so-called gaming mobo with a puny little graphic card is no match for a cheap mainstream mobo with fast cpu and a 8800GTX with 4GB of ram.

I don't find this mobo at LYP. Is there any other good m-ATX motherboard for overclcoking? I don't aim high, as long as it will reach 240HTT 1.4V its good enough...and my budget is below RM300

biostar tforce ta690g...another good overclocking m-atx mobo

I saw a few NView in TMatch (top floor LYP).

Youre right bro,im using it now and im satisfied with it.But will change mobo if barcelona released.

---

Added on November 4, 2007, 1:40 amI think,TA690G is good for gaming,but not using the on board card.The sounds really great and impressive!!.

This post has been edited by ocz: Nov 4 2007, 01:40 AM

wta tht this board is PCI-E 16x with 16x bandwidth? or 8x bandwidth? cause my previous mobo Abit NF-M2S wif 6100 chipset onli hav 8x bandwidth on PCI-E 16x slot..

This board run on PCI-E X16.

barcelona is socket-F, u sure u gonna jump to that platform?

Opps sorry.i mean phenom.

After having the nview for quite a while, finally I've had the time and matching hardware to over clock it. And guess what..

The nview screams!

So here we start at my miniature lab/workshop..


The PC is actually the family PC, which I'm setting up as a HTPC/home server. As its shared by my mom and sis, I can't take it offline too long or I'll have plenty of complaints to deal with. Here's a shot of the system in its present home, with some newcomers freshly added to the lotn


Taking it out, I can see the silent OTES has been well implemented. Look at the dust from the CPU fan.


The dream team, my new F3 and Crucial 10th Anniversary. Have another stick, but at the time it was temporarily sitting in a friend's PC.


OC set-up all laid out

I've mentioned once or twice before that I'm using an XP-120 to cool this system. And here's why.


As you can see, it covers everything, ram, voltage regulators, even the chipset gets a little bit of air. Only thing that sucks is that putting in and removing ram is a pain. Plus, its short enough for me to build a low profile case around it later.

For a start, here's OCers favourite page. Something you don't see on many matx mobos. Thanks to pmmonkey for letting me use her LCD while she's back in her hometown.


With the latest bios update, vDimm has been extended to 1.75-2.50v


Previously, I could not properly make it past 250HTT at boot, only from windows could I go higher. With some more experience now (thanks to dblooi, soulfly and a few others), I tried out 280HTT, setting Trc to 129ns while leaving everything else at stock..


IT BOOTS!


Even 300HTT and 320HTT was no sweat. Pushing to 330HTT however,


Ok, too bad, need a little more tweaking..even though this is on 1.400vcore and 2.20vdimm, still no luck..

While the board is just hanging there, I'll take a few voltage measurements..



What the hell..an overvolting mobo? This matx really has overclocking in its blood. PSU readings are normal though.




Even the stock vcore (1.2v) and vdimm (1.8v) are overvolted.



Now I'm gonna pull out all the stops and push the HTT as far as it will go, settings as below, 1.45vcore, 2.2vdimm, NB & SB ~+0.1v, HT voltage 1.25v. CPU multiplier down as far as it will go (5x).


And guess how far I managed to boot..


OMG! Flatten even soulfly's last record!

Gotta stop now. Dad's lappie running out off batt.

lohwenli bro
what camera u are using.. sorry out topic =.=

So sad that this mobo is out of productions.