The thing is i am not too sure how to update to 3.52 m33.  How do i exactly update that ? and have any of u guys had this same problem? I dont think there is any mode in 3.51 . only enable and disable umd right?

Thanks alot man.. appreciate it. Am at work now will try it later . Fingers crossed. I do not know what version it currently it.. it only states 3.51 m33

Well bro i updated to 3.52 m33 and basically i still cant play metal gear solid for nuts. SO what i am going to do is redownload the program and try again tomorrow.

Already change at no-umd option to Sony np9660?

Hi Guys, I have installed this 3.52 M33 into my 1GB memory stick.

So want to know if I want to use another memory stick, do I need to repeat the step to install 3.52 M33 or just simply copy the folders into the memory stick?
...

...
Last question, what is the key to overclock speed? I do not see any overclock instruction in the readme file.

crystal clear explaination..

why dont u compile all your helpful post to your psp for beginner? easier for them to refer again later. 
...

Ok well thanks for all the help but Metal Gear Solid does not work i changed it to m33 and other as well in the configuration menu with no avail.. sad.. this is weird it was working fine when i was using 3.40 oe-a the day before doing this. So i am going to redownload and insert the game , I am hopping the game got corrupted or something.

Actually the custom firmware is the orignal firmware with some tweaks so we can play homebrew.
...

1 - If you are under official 1.50 PSP firmware, copy kxploitpatcher and kxploitpatcher% folders from "1.50only/" of this download to your "ms0:/PSP/GAME/" and use it.
2 - Once done it, or if you are under any Special/Open Edition/M33, copy M33CREATOR folder to your "ms0:/PSP/GAME" (1.50fw) or "ms0:/PSP/GAME150" (SE/OE)
3 - Download official 3.52 eboot, rename it to 352.PBP and place it on "ms0:/PSP/GAME/M33CREATOR/" or "ms0:/PSP/GAME150/M33CREATOR/"
4 - Download official 1.50 eboot, rename it to 150.PBP and place it on "ms0:/PSP/GAME/M33CREATOR/" or "ms0:/PSP/GAME150/M33CREATOR/"
5 - Go to Games/Memory Stick on your PSP, and execute "3.52 M33 CREATOR". Once finished, it will go back to the XMB.
6 - Go again to Games/Memory Stick on your PSP, and execute "3.52 M33UPDATE". You'll have to press X to agree to the installation.
7 - When finished, press X to shut down and reboot manually.
8 - Enjoy your 3.52 M33

this is the read me file from 3.52 M33
i got few questions:
1. My one is 3.40OE....so i should follow step 1 or step 2??
2. THe step 3 and 4, we need to download the Official ourselves??or use the eboot inside the M33CREATOR folder?

DFlo, thanks so much
hehe...sure many psp noob very like you oh
u are so helpful
thkx....

but i got 1 question is those Non-original 2GB MSPD high speed one....RM80 5 years warrantys as well, do you think to worth to buy??and does it stable??

The bug fixes in this release include the autoboot plug-in problem which some some configurations experienced as well as the issue with nethostfs crashing when the PSP fails to connect to the server. In addition to this, there are a few other fixes that were implemented:

    * Fixed screen corruption while changing CPU speed in PS1 games.
    * Retained the overclock speed after exiting game/app while nethostfs is active.
    * Fixed adhoc PC nethostfs connection problem. You no longer need to mess with the wlan switch.
    * The MP3 will now resume at the exact position when switching firmware versions (1.5 iR Shell to 3.x iR Shell, or vice versa).

i am using 2.40oe-a from dark-alex. Can i straight upgrade to 3.52 m33?Which version most stable?

what do you mean i need those eboot? LAst tiem i upgrade from 3.10 to 3.40 just use the installer le... CAn list step by step to me?

i run oredi
but i check my firmware
it still show 3.40 oe =.=
why ar

haha, bro, when everytime i need u, sure u will appear
but problem solve oredi
hehe
...

then 3.52 m33 can use irshell?
...

...
About irshell, not sure... *what is irshell? *

hhhmmm...........
guys...i got few questions here
1.
if i want to upgrade the M33
i dun understand the instruction
Instructions: copy seplugins to the root of the memory stick. Extract the following prx of a firmware: /kd/popsman.prx, /kd/pops.prx, /vsh/modules/libpspvmc.prx and /vsh/modules/pafmini.prx and copy them to /seplugins/popsloader/ with names like popsman3XX, pops3XX.prx, libpspvmc3XX.prx, pafmini3XX.prx, where XX is 40, 51, or 52.
can u explain??
...

DFlo, even i at 3.40 oe-a also need 1.50? just follow everything u said?

then how to update to 3.52 m33-2 from 3.52 m33?

then i need to delete those old m33creator file?

---

Added on August 8, 2007, 10:08 pmand, can list steps for installing m33-2 firmware? What's the seplugins for? I see the readme quite fussy le..

Changes in M33-4 (mainly bugfix)

    * Fixed the bug that caused CRC error when writing to flash usb in the XMB. Now writing is OK.
    * Added the new speeds to vshmenu and core, because we forgot in recovery.

Also, a few notes from Team M33:

    * As we didn't want to release a new update without something new, we worked in making 3.10/3.11 to work with popsloader, and that's it, the new popsloader plugins supports them.
    * Instruction for 3.10 and 3.11 are same as 3.30: you need pops.prx, popsman.prx and pafmini.prx with the correct names in popsloader directory. And remember that savedata of 3.10-3.30 are incompatiblewith those of 3.40+. We'll research if a solution for this is possible.

what that mean password for the rar file?

http://digg.com/gaming_news/Pandora_s_Batt...grade_EVERY_PSP

i hope those who bricked their psp still keep them..

u're going against wat Team C+D mean to be. Pls dun charge people for something like tis with this FREE piece of software.

If u're going to charge money bcos u're giving service, pls do consider to donate them to giv them their deserved support.

If u insist to do so too, then DUN EVER CHARGE PEOPLE!

belanja minum laa.