Outline ·
[ Standard ] ·
Linear+
Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits
|
flatfinger
|
 Jan 9 2007, 12:36 PM
|
|
QUOTE(irenic @ Jan 9 2007, 12:23 PM) yeah.. i believe both luck and batch number plays important role in OC.. same pieces of hardwares, same batch number do not guarantee same overclocking result  fyi, those extreme ocers like at xs, or other oversea forums, they bought lots of processors, test it 1 by 1 and then we can see they hit 4ghz and above.. i also bought lots of conroe but not for overclocking purpose.. i concern more about heat.. some chip produces less heat than the others.. and in terms of oc, i had conroe that cant do 2.9ghz, while my current conroe can run super PI at 3.7ghz at 1.4vcore. yup agree...the otai has spoken...  |
|
|
|
|
|
flatfinger
|
Jan 9 2007, 12:43 PM
|
|
|
QUOTE(irenic @ Jan 9 2007, 12:40 PM) ko lg otai.. 3.5ghz stable with low vcore  low ker...bios set 1.525v...tp read 1.5v....tp akuk takleh cecah 3.7Ghz...fsb akuk wall kat 460...ko lagik otai lar.....  |
|
|
|
|
|
flatfinger
|
Jan 10 2007, 09:59 AM
|
|
|
QUOTE(irenic @ Jan 10 2007, 08:41 AM) owh.. i thought 1.3x vcore only hehe.. fsb wall @ 460 is not bad IMO 1.3x vcore can only give me at 3.2Ghz stable...to stable at 3.5Ghz vcore 1.525v...but its ok actually since Im on wc...idle around 35-37 max orthos load 60-65... i can hit max 3.66 on 460fsb...n run super Pi 1M...but i think need more juice to stable it...tak mau set vcore lebey 1.6  |
|
|
|
|
|
flatfinger
|
Jan 11 2007, 09:10 AM
|
|
|
QUOTE(p00ket @ Jan 11 2007, 02:54 AM) haven't even finished OC'ing my e6300. now tempted to upgrade already   e6300 16.844 - p00ket - 3.47GHz, 496 x7 / Gigabyte 965P-DS4 / 1GB DDRII-992, 5.0-5-6-13 / Zalman 9700did ur oc stable?? |
|
|
|
|
|
flatfinger
|
Jan 12 2007, 10:08 AM
|
|
|
QUOTE(frank_fusion @ Jan 11 2007, 08:36 PM) same prob as me..im oso using E6600 ES..btw im using G-power pro for cooling n as i ask around d temp from d TAT or core temp shd be more reliable..nway wut mobo u r using now? im using EVEREST ultimate edition to monitor the temp..its seems to give me most accurate reading..even for the voltage...(top right of the screenshot)  |
|
|
|
|
|
flatfinger
|
Jan 12 2007, 04:06 PM
|
|
|
QUOTE(deric88 @ Jan 12 2007, 03:48 PM) everest also show core temperature with other temperature yup everest is gud to monitor temp...plus others |
|
|
|
|
|
flatfinger
|
Jan 12 2007, 04:57 PM
|
|
|
hahahha....ultimate 3.50 above...beta latest is 3.50.865...
|
|
|
|
|
|
flatfinger
|
Jan 12 2007, 09:24 PM
|
|
|
wahhh very cool...huhuhu...mine core temp, everest n speedfan show same...but i can't even run TAT...
|
|
|
|
|
|
flatfinger
|
Jan 12 2007, 10:10 PM
|
|
|
QUOTE(nakata101 @ Jan 12 2007, 09:28 PM) I will try TAT the most accurate software temperature tools later.... EDIT:Dunno why i cant install this most accurate software temperature tools. Error message pop up.." Error enumerating on demand clock modulation support Terminating tool" same to me....the popup msg appear just after double click it |
|
|
|
|
|
flatfinger
|
Jan 13 2007, 01:38 AM
|
|
|
QUOTE(irenic @ Jan 13 2007, 12:30 AM) or the problem bcoz of biostar software? i didnt install any biostar software...maybe the mobo just dont like TAT...anyone using biostar can run TAT???? |
|
|
|
|
|
flatfinger
|
Jan 17 2007, 02:41 PM
|
|
|
QUOTE(albirri @ Jan 17 2007, 12:15 PM) i've tried increase the vCore but still can't boot...maybe i've to modify the ram...can someone help me...here's my screen shot of AB9 PRO bios... i think u have to set ur vdimm at 1.9v or higher since ur ram default voltage is 1.9v at 4-4-4-12 This post has been edited by flatfinger: Jan 17 2007, 02:45 PM |
|
|
|
|
|
flatfinger
|
Jan 18 2007, 08:19 PM
|
|
|
QUOTE(cstkl1 @ Jan 18 2007, 07:13 PM) commando. 965p rite uik noticed on ure siggy irenic u have an em2 sish cycom conned job by putting that under performance ram.. which they said it was their distributor that sold it under performance ram... im oso using EM2 like irenic...as mushkin said its not a high performance...but its gud enough.. |
|
|
|
|
|
flatfinger
|
Jan 18 2007, 08:27 PM
|
|
|
QUOTE(yehlai @ Jan 18 2007, 08:20 PM) So far can o'c to 3.6Ghz.. dont wanna push too far. If wanna go beyond 3.6 i think need 1.7v, scared will burn.. During o'c i can feel my PSU running d^mn HOT, especially at the top plat of my case .. never encounter this b4. gud to hear...any screeny...orthos stable??? |
|
|
|
|
|
flatfinger
|
Jan 18 2007, 08:40 PM
|
|
|
QUOTE(yehlai @ Jan 18 2007, 08:30 PM) Dont wanna stress it.. PSU and HSF so hot. Scared it might burn When u o'c PSU hot or not?? Mine is really hot just now.. monitor ur +12v rail...make sure it not drop under 11.80v |
|
|
|
|
|
flatfinger
|
Jan 18 2007, 08:51 PM
|
|
|
QUOTE(yehlai @ Jan 18 2007, 08:46 PM) It was 11.84v. Why cannot go under 11.80v. Mind to explain? thanks. I feel tht for 965PT, if vCore > 1.6v then under volt will occur. meletup!!!! overload |
|
|
|
|
|
flatfinger
|
Jan 19 2007, 09:17 AM
|
|
|
QUOTE(basSist @ Jan 19 2007, 01:49 AM) woah my +12v alwiz under 11.80 woh~ 11.65 and 11.58 heavy load. how eh? belum meletup eh if not terbabommm lucky for u...but its not gud for everyday usage...but if u want to take the risk...its ok then...anyway its ur own rig...  |
|
|
|
|
|
flatfinger
|
Jan 19 2007, 10:01 AM
|
|
|
QUOTE(irenic @ Jan 19 2007, 12:17 AM) it might not fall into the real performance ram due to its timing, but dont forget that mine can reach very high fsb 1080fsb @ 2.2vdimm only and stable orthos.. maybe at loose timing but not many ram can reach 1000 even at loose timing  gskill hz also max out around 950fsb  to support irenic..hehehe believe it..the Mushkin EM2 is really gud...im using it too..my overclock result 500Mhz DDR1000 with tight timing 4.0-5-4-10 @2.15v...if 400Mhz DDR800 it can run at 4.0-4-3-10 @1.95v same SPD timing as Mushkin XP2   anyways there is a new DFI Infinity P965 will be around..n its black...the review seems very tempting overclocked board armed with nice bios..  DFI Infinity P965 black mobo reviewThis post has been edited by flatfinger: Jan 19 2007, 04:49 PM |
|
|
|
|
|
flatfinger
|
Jan 19 2007, 04:34 PM
|
|
|
heehhe...nice black mobo...dfi bios always the best for overclocker...can wait how much RM??? for the board itself
|
|
|
|
|
|
flatfinger
|
Jan 19 2007, 07:40 PM
|
|
|
QUOTE(redart @ Jan 19 2007, 06:57 PM) well it's not out yet so the price is not known, but Infinity series from DFI is unlikely to burn a hole in the wallet, well hopefully.  i think should be around RM600..hopefuly |
|
|
|
|
|
flatfinger
|
Jan 20 2007, 01:50 PM
|
|
|
QUOTE(siauann @ Jan 20 2007, 12:58 AM) great...hehe..if its rm600 around tat i will consider it  we wait n see lorr... |
|
|
|
|
Quote
0.0340sec
0.47
7 queries
GZIP Disabled