Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
4 Pages < 1 2 3 4 >Bottom

Outline · [ Standard ] · Linear+

 Intel® Core(tm)2 Duo/Quad Overclocked Rev. 2, Going beyond factory limits

views
     
basSist
post Dec 6 2006, 04:35 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(deric88 @ Dec 6 2006, 03:57 PM)
undervolting  won't damage cpu rite?
if not correctly done just crash or weird stuff will happen? ohmy.gif  blink.gif
*
ya undervolt wont damage unless u overvolt laugh.gif
basSist
post Dec 6 2006, 04:46 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(siauann @ Dec 6 2006, 04:37 PM)
im oso surprise i can run 1.25v @ 400x7 @ 2800mhz  smile.gif
now priming..oledi pass 6hrs  flex.gif
*
last nite tried 1.375 in bios (1.344 in cpuz while priming) pass 9 hours 59 minues and 18 seconds only. after that failed sad.gif

temp: highest 64c lowest 60c

sigh sigh i think need more juices again buthen the temp.. makes me dont really wanna add juices sweat.gif
basSist
post Dec 7 2006, 01:26 AM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(deric88 @ Dec 7 2006, 12:48 AM)
passed 2.5 vcore, so now doing 2.25 at 400x7
65C orthos load TAT temperaute considered hot?
*
2.5? 2.25? it is 1.25v lah laugh.gif

with stock HSF then consider normal lo.

mine priming 400x8 at 1.375 in bios highest in noon is 65c too. but i am using ultra120 >.< my temp quite high
basSist
post Dec 7 2006, 02:22 AM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(deric88 @ Dec 7 2006, 01:30 AM)
if get AS5, can reduce around how many degree celsius?
think i can go lower than 1.25 with 400x7?
*
hm.. around 3-5c? i am not sure about it also.

u can try lower as long as the system is stable enough wink.gif
basSist
post Dec 7 2006, 10:12 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(remysix @ Dec 7 2006, 09:41 PM)
all the sudden people are pushing down the vcore instead of pushing the clock higher... biggrin.gif ... just tried mine last nite...now running orthos for 22hrs at 458x7 wif 1.325 vcore...will stop at 24hrs...
my e6300 history at 3.2G: 1.375 --> 1.350 --> 1.331 --> 1.325
burning-in does help! thumbup.gif
*
hehe i am running 1.375 too for my 400x8 now~ orthos 21hours d. gonna follow u to decrease the vcore after that laugh.gif

ur orthos - blend or just stress cpu?
basSist
post Dec 7 2006, 11:24 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(remysix @ Dec 7 2006, 10:40 PM)
stress cpu...100% load...decrease bit by bit...takes time but it pays wink.gif
*
haha k~ will work for it laugh.gif

QUOTE(yehlai @ Dec 7 2006, 10:46 PM)
You mean using TAT load 100% to test?? Will tht help to burn-in a lot?
*
using Orthos~ better than TAT guahhh
basSist
post Dec 11 2006, 09:42 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(csechuan @ Dec 11 2006, 09:36 PM)
no la...my system stable la 23hrs dual prime d....
i tested it b4 i bought my x-fi...
after x-fi oni got such prob....it mentioned in thread b4...they said bios or something problem...but i forget how to fix it....any1?
*
try to update ur bios to F8i laugh.gif
basSist
post Dec 12 2006, 01:49 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(flatfinger @ Dec 12 2006, 12:58 PM)
ok guys....i betray AMD already sweat.gif ...sold my opty 165 n get e64...joining the dark force of intel now sweat.gif

here my OC screeny @3.4Ghz, 1.45v bios vcore, 1.42v windows read
priming 6 hours stable drool.gif ...still going..

user posted image
*
woah 1.45v only 57c sweat.gif what cooler u use kah? air-coned?
basSist
post Dec 12 2006, 02:11 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(flatfinger @ Dec 12 2006, 01:50 PM)
no la...im using wc..heheheh whistling.gif
*
haha no wonder laugh.gif

QUOTE(yehlai @ Dec 12 2006, 01:59 PM)
Core temp's reading temp is 5-6C lower than TAT...
*
is it? i dont think so. maybe u use TAT to stress then the temp is higher than the temp stressed by orthos/prime95/sp2004
basSist
post Dec 12 2006, 04:11 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(yehlai @ Dec 12 2006, 03:06 PM)
core temp and TAT temp reading is different. Becoz core temp's reading always lower 5-6 degree. Just open another TAT and compare yourself. TAT is more accurate becoz TAT is design by Intel itself for Intel proc and mobo.
*
btw i am using everest and TAT. both give me accurate readings wink.gif not using core temp anyway laugh.gif

QUOTE(Evogenix @ Dec 12 2006, 03:31 PM)
Announcement to ds3 user, F8j BIOS is out

Credit to bingo13 @ XS
http://rapidshare.com/files/7130218/965pds3f8janandtech.zip

Evogenix
*
thanks. change log pls
basSist
post Dec 13 2006, 07:05 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(mikelanding @ Dec 13 2006, 07:03 PM)
Dont get fool by the Vcore reported in CPU-Z...is a bug...The actual Vcore maybe more than wat reported....
*
yes. when the vcore up till 1.5v the cpuz will show 1.2v only iianm.
basSist
post Dec 13 2006, 10:22 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
my vcore 1.375v in bios @ 3.2Ghz gaming around 56-57 too wink.gif
basSist
post Dec 13 2006, 11:23 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(DaRkSyThE @ Dec 13 2006, 10:25 PM)
me too. 46 with air cond biggrin.gif  cool2.gif
*
air cond~ drool.gif the lowest temp i can get during rainy mid night is 54c (orthos), gaming should be 50-52c laugh.gif

QUOTE(flatfinger @ Dec 13 2006, 11:06 PM)
mine 1.35v bios...windows reads 1.328v @ 3.2ghz...load gaming around 46-49 watercooler..
*
watercooler + air cond should be perfect >.<
basSist
post Dec 16 2006, 10:14 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(RokXIII @ Dec 16 2006, 09:16 PM)
Currently I'm facing some problem here...
The idle temp for my e6300 is 51-54C, is that too high? I'm using stock hsf, and ald apply the AS5...
Any1 help pls! icon_question.gif
*
ya i got around that temp when using stock hsf. try to remount ur hsf and apply a thin layer of as5 properly.
basSist
post Dec 17 2006, 01:21 AM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(vassalle @ Dec 17 2006, 12:20 AM)
Just (finally) got my C2D system today. And using stock heatsink, it idles at 52c in an airconditioned room. Put under load (TAT), the temp is 68c! and everything is at stock. Even the bios (F6)  shocking.gif
*
air con room got 52c idle temp!? hm.. that's abit too high. did u mount ur hsf properly? try to clean the stock paste on the base of hsf and apply a thin layer of AS5 maybe on the cpu. remember to clean the previous paste perfectly. use lsopropyl alcohol to clean. make sure ur air flow in the case are nice enough.
basSist
post Dec 17 2006, 01:29 AM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(vassalle @ Dec 17 2006, 01:25 AM)
btw, forgot to mention, im using the gigabyte ds3 board.

the stability is okay la.. haven't install anything yet.

Now, overclocking as per the guide from tomshardware forum.

running at 400FSB, vcore = 1.275, vDimm = 2.0 v

Using KVR PC5333 1gb (can't get the hynix one, its a kingston chip) sad.gif

Running orthos (CPU stress) for about 30 minutes, still ok. temp @ 65c. It was idling at 55c (after OC). Temp reading by TAT. Temp by speedfan only around 55c (Load)

How long should i leave it running stress it under orthos?
*
wow u got quite low vcore there!!

i got mine 400x8 at 1.375v.. cant go lower than that (not tweaking the fsb or mch voltage yet lah) temp also almost same like mine. (not air con here laugh.gif)

try to run orthos - blend (stress cpu & ram) for at least 8-12hours to ensure the stability wink.gif
basSist
post Dec 17 2006, 02:08 AM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(vassalle @ Dec 17 2006, 01:37 AM)
owwhh. i took the stress CPU test. Oh well, should try the blend now..

Thanks for the tip bassist. Btw, i was referring to a post http://forumz.tomshardware.com/hardware/GU...pict205223.html

was just trying my luck. tongue.gif
*
when in blend mode ur pc will be very lag.. cannot play game or launch heavy applications. but nvm lah let it run when u sleeping. or u can just try custom..so that the stressing wont eat so much of ur RAM. i am not really know how to configure it. maybe u have to google around. happy o/c smile.gif
basSist
post Dec 19 2006, 11:57 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(deric88 @ Dec 19 2006, 10:21 PM)
that one considered high for 2.5ghz. my e6300 @ 3.0GHZ @ 1.25v @ G-Power BL @ folding@home 100% load only 60C, you shud try undervoltage....

btw i dun have arctic silver yet, getting it soon from moderno
*
just for ur reference: mine e6400 @ 3.2Ghz @ 1.375v @ Ultra-120 @ 2 folding load = 56c laugh.gif

QUOTE(RokXIII @ Dec 19 2006, 10:49 PM)
same problem for me, mine running 5-5-5-15 now, wan try change to 4-4-4-10, but dunno how much vdimm i have to feed.... hmm.gif
*
try 2.1 vdimm or 2.2. On ur own risk wink.gif

QUOTE(vassalle @ Dec 19 2006, 10:55 PM)
room got aircond? closed case?

folding@home and orthos got difference? i know orthos and TAT load got a few degrees different lor..
*
folding got lower temp compare to orthos and Tat.

should be folding<orthos<tat.

QUOTE(vassalle @ Dec 19 2006, 11:53 PM)
yerp.. have been tryingg.. so far found a sweet spot for 400x7 @ 1.185v vcore.
idling at 44c (TAT)
load orthos at 53c
closed case, air conditioned room..

trying to rite now trying at 450x7 @ 1.27v vcore
so far, load at 59c  rclxub.gif scared reaching 60c zone already.. hopefully the concensus of 65c safety zone is true. smile.gif
*
dont worry. not over 70c then ok d laugh.gif

This post has been edited by basSist: Dec 19 2006, 11:58 PM
basSist
post Dec 20 2006, 12:17 AM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(deric88 @ Dec 20 2006, 12:05 AM)
eleh, ultra 120 wor.... mine just cheap G-Power tongue.gif, wait i get arctic silver better results hopefully

how i wish i am an Eskimo tongue.gif  cool.gif
*
hehe Eskimo?! then maybe u need warmer to operate ur pc laugh.gif

QUOTE(vassalle @ Dec 20 2006, 12:07 AM)
nice variations.. mine is tbtvx tongue.gif
just applied as5 yesterday, have to wait like 200 hours or so to see the real powerr. biggrin.gif
*
ttbtvx good cooler also ~
basSist
post Dec 20 2006, 09:44 PM

Don't look at my stars
*******
Senior Member
3,567 posts

Joined: Jan 2003
From: Paradise
QUOTE(prescott @ Dec 20 2006, 09:05 PM)
Any input for DS3 rev 2.0? is it available in malaysia?
*
i'm using DS3 rev 2.0 if not mistaken biggrin.gif
« Next Oldest · Overclockers United · Next Newest »
 

4 Pages < 1 2 3 4 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0338sec    0.46    7 queries    GZIP Disabled
Time is now: 11th December 2025 - 12:39 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.