WHO USE THIS ROUTER TENDA AC1200 Dual Band Wireless Router?
TENDA AC1200 Dual Band Wireless Router 5x5dbi WiFi UniFi Time FH1202
Hosted @ Lelong Picture Services

TENDA AC1200 Dual Band Wireless Router 5x5dbi WiFi UniFi Time FH1202
Hosted @ Lelong Picture Services

TENDA AC1200 Dual Band Wireless Router 5x5dbi WiFi UniFi Time FH1202
Hosted @ Lelong Picture Services

3 Years one to one swap warranty
AC1200 ultra high speed
Built-in Broadcom chipset for fast & stable connection
200mw high power & 5 x 5dbi antennas - Wall Killer
100% compatible with UniFi, Time Fibre & Maxis Fibre



The Tenda FH1202 is a high powered 5th generation dual-band Wi-Fi router that delivers wireless speeds up to 1200Mbps. Compatible with next generation WiFi devices and backward compatible with 802.11 a/b/g and n devices, it enables HD streaming throughout your home. The FH1202 with simultaneous dual band WiFi technology offers speeds up to 300+867Mbps and avoids interference, ensuring top WiFi speeds and reliable connections. The FH1202 is equipped with high powered amplifiers, 5x5 dBi external antennas to provide extreme Wi-Fi coverage and penetration. This makes ideal for all of your Wi-Fi devices including, PCs, televisions, game consoles and mobile devices to access to next generation Wi-Fi throughout your entire home, backyard or office.

>> Simultaneous dual-band to maximise throughput and help avoid network interference
>> 5th generation 802.11ac gives you concurrent dual-band 2.4GHz/5GHz for up to super-fast 1200bps
>> 5x5dBi external antennas ensure optimal coverage
>> Advanced security encryptions include WEP, WPA, and WPA2 help to secure wireless communications.
>> Supports WiFi Protected Setup ( WPS) feature
>> QoS and WMM features gives priorities to bandwidth-intensive applications like HD streaming and gaming

Antenna5 External Antennas
Button1*WPS/RESET button
PowerInput: 100-240V—50/60Hz 0.3A
Output: DC 12V==1.5A
Indicator1*Power, 1*SYS, 1*WAN, 3*LAN, 1*5G, 1*2.4G, 1*WPS
Dimension153.2mm*153.2mm*40.04mm（L*W*H）
FrequencyWorks over 2.4GHz and 5GHz
Basic Functions Wireless Switch
SSID Broadcast Switch
Work Frequency: 2.4GHz,5GHz
Channel Of 2.4GHz:1-13
Channel Of 5GHz: 149、153、157、161、165
Wireless Speed2.4GHZ:300Mbps
5GHZ:867Mbps
Wrieless SecurityWireless MAC address filter
WEP encryption
WPA-PSK/WPA2-PSK、WPA/WPA2 etc encryption mechanism
Wireless Security Switch
WPS security configuration
Operating ModeAP Mode
Client+AP Mode
WISP Mode
WDS Bridge
DHCP ConfigurationDHCP Server
Client List
Static Address distribution
Virtual ServerPort Mapping
DMZ Host
UPnP
SecurityClient Filter
Mac Address Filter
URL Filter
Remote WEB management
VPN Pass-throughSupport
Default SettingsIP address : 192.168.0.1
Default Password Is Empty
Port1 10/100M auto-negotiation WAN port
3 10/100M auto-negotiation LAN ports
WAN Connection TypePPPoE
Dynamic IP
Static IP
OtherBandwidth Control, Guest Aceess, MAC Clone, Traffic Statistic，Import And Export Of Configuration Files，Upgrade Web software
Package Content1* 1200M 11AC dual band wireless router
1* Ethernet Cable
1 * Power Adapter
1* Quick Installation Guide
1*Resource CD
TemperatureOperating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
HumidityOperating Humidity: 10%~90% RH non-condensing
Storage Humidity: 5%~90% RH non-condensing
Certification3C、FCC、RoHS


Attached thumbnail(s)

I don't use it. Is it good?

Very good router at that price even though it comes with only Fast Ethernet

review pls review

im having problem (not entirely) lan 1 & lan 2 port only max 2mbps per port , ethernet connection i'm talking here.

while wireless 2.4 and 5gh can reach about 8mbps-12mbps .

BUT it's unifi30 i'm currently using,the download speed is even worst then the dlink default modem few years ago.

any help?

What router is that? Model?

-- Double posted ---

This post has been edited by mztang52: Jul 17 2016, 12:17 AM

Tenda VS TP-Link, pick TP-Link

Tenda network port not 1gigabit

guy how about TENDA AC1200 Dual Band Wireless Router ?
is it really good compare to ASUS or Tp-link?
please share comments.
any user review on UNIFI ?

got it last night... plugged in and setup everything nicely...

and got internet connection for my connected devices but iptv for unifi not working...

already tried the manual vlan tagging and also the preset "UNIFI"... tried to attach IPTV into all 3 LAN Ports... never work... going to bring it back to shop to change to other brand...

when i first login the interface already pissed me off because i keep getting logged out and need to relogin.. first time encounter such issue... never got such issue with other brand like Asus, TP-Link, Aztech...

my advice... just skip this good looking 5 antenna monster..

What is the vlan you put for your HyppTV?

the usual VLAN 600... tried to set manually and also the "UNIFI" profile..both not working..

OK. Then return it to them.

This post has been edited by mztang52: Aug 3 2016, 10:50 AM

Thank you for support tp-link product.May I know what model do you buy for tp-link?

i bought this and it worked...so far
im using 30mbps unifi

the download speed is great but the speed will go down from mbs to kbs..kept resetting the router..

Fixed.



This post has been edited by aizielectreon: Jan 4 2017, 12:12 AM

how was the router overall performance ? Currently im using tm stock router (L7 network) and got fed up with this router because keep dc when i downloading or streaming video.. Is it worth it to buy tenda Th1202 router ?

eyeing this model for months and i'm not convinced seeing the replies here. Price is good but if the performance is so-so, im better off with other router then

Can someone tell me how to configure tenda router? mmine keep giving a " tenda No response from the remote server. Please check whether your computer can access the internet directly using your Modem. If no, contact your ISP for help."

where did you get your unit from? im having the same issue as well, actually emailed tenda hq for help and no reply from them. tried to flash the firmware, couldnt do it as well.

straight forward..nothing to mess with..

where did you get it from? for me, there's no vlan option on my tenda ac6. couldnt use it at all. using it as a repeater now =(

i bought it at lowyat.. sri com. the promoter said unifi compatible so yeah its true.

straight forward set ppoe and iptv and thats it.
i dont recall any vlan option though.

sadly i already sold it.bought for testing.

You need to flash it with Malaysia Firmware in order to do the VLAN settings. Global ROM does not support VLAN tagging.

Oh God I upgraded firmware cause no iptv, now it keep giving me no response to remote server when putting in pppoe! I wanna muntah already someone please save me

You need to contact your seller in order to get the local firmware. They do not have Malaysia website here so I am not able to help you.

Yeah contacted them on Facebook and they emailed me the firmware. Later struggled like hell cause still keep saying can't connect to remote server had to plug the lan cable here and there. After 2 hours finally fixed

Congratulations bro, it's good to hear that. BTW, where did you stuck at? Is it at the VLAN settings there?

you have the link for the firmware?

I never handled hypptv before, thought had to go through the Internet setting to set up, the technician told me this router just plug and play so I kept trying all the wires till it work

https://drive.google.com/file/d/0B6WcBVRIm_...ew?usp=drivesdk

can you share snapshot GUI for tenda especially on QOS portion. ?

Hi bro, may I know what mailbox you email to ? My AC18 having the same problem too

How good was the router? is it comparable with tplink archer c5?

well..its better than unifi (1st gen router) and DIR-850L
in terms of signal.

but sometimes it will get DC; need to reconnect manually - maybe the fault is at unifi.

i could not compare it with tplink archer c5 bcoz i never use it.

The DC, does it happens frequently? or just random

how far can the 5ghz signal can go?

random..

5ghz not so much
2.4 from 4th floor to car park can get signal.

PM them on Facebook, ookas something

Thanks :-)

This post has been edited by bryanling: Jun 30 2017, 10:45 AM

helo kawan kawan sekalian. can i use this tenda ac1200 with my streamyx modem? because i saw the QnA at 11street, ookas replied that cannot use for streamyx.

any 1 here using streamyx with this tenda ac1200 router ?

Thank you. You're a life saver
Tried to update my ac6 with global firmware, internet stopped working after that

Can, why not?

coz i saw the QnA @ 11street. but i've proceeded and tested myself, no problem for streamyx n very straight forward for the setting.

which channel did u set for wifi 2.4ghz n 5ghz ?

Just put it on auto will do because the channel must be set at the least overlapping channel. So it's highly recommended to put it on auto.

This post has been edited by mztang52: Jul 31 2017, 10:00 PM

most of the router in market no problem with streamyx, only problem for unifi. So most of the modem should work well with streamyx.

my channels are 11 and 160. channel normally is based on your area, should set to other channel to avoid channel interference for best signal.

How's the stability/performance of this router? Im interested to buy but have only 1 concern, will it get disconnected from time to time randomly?

Just got upgraded to unifi 50mbps recently plus this router is really affordable.

fyi, total of 5 device connected to router with 2 using lan cable.

Appreciate the info.

Far far better than D-Link DIR850L provided by TM.

anyone selling cheap this/

Me .. U want ?
cause i just change to asus 55 ..

omg you save me ~!

hi everyone
recently bought tenda 1200 ac6

1. look simple instalation til my entire unifi unable to connect til i got them fix at my home back to orginal dlink ...
2 . based on unifi cs ,,, they said can use for repeating router ... modem - dlink router - ac6 ( assit me on this plz )
3. any right step to set up my unifi modem direct to tenda ac6 ? ..
4.. the link u gave have no file inside... which type of file is it .. winzip ? pdf ? need to download thesoftware

plz help me tq

Download the file from here https://ufile.io/41vhz

Does anyone have the Malaysian Firmware for AC18 (AC1900) ?

thanks in advanced!

Just flash your AC18 with Asus Merlin firmware.

Dude!!!
Major thanks wei!!!
I oso went and flashed firmware.. Kena cannot connect.
Mana tau need specialized fw only can use with unifi..

Luckily found this post and ur link.

Dear. May i know how to open the bin file? It show me format error when i upgrade the firmware.

go to your router setting page 192.168. blablla, then go system setting, choose firmware upgrade, choose local file, click that bin file.

please belanja me makan or buy me new phone, i got no phone now

Sure belanja. XD
Ya, when go to the upgrade firmware page, choose file. then show me format error.

maybe try redownload the file and restart modem? But if still error I really cant help, not experienced with this you can contact them on facebook

That mean bin file is the right file? or need any software to open the bin file 1st?

no need open or anything, just select it when selecting local upgrade

Ok. Thank brother. I try again or return to seller.

This router very stable.but cannot even reach 100mbps speedtest..maybe due to fastethernet port only..if gigabit sure can..

This refers to Tenda AC6 or Tenda AC18?

Can I get the chinese unit and flash it with this?

Sorry Idk, if I used Malaysian version and flashed global one and can't work then I think terbalik also will have problem, better u message them on facebook and ask

Msian supports Unifi while global one doesn't - makes sense I really hope it will work so someone please point it out. Chinese unit is priced half!

Bro, please test your Router security at GRC.com see your router is secure or not.


Attached thumbnail(s)

Can anyone confirm this?

I ordered one. Will flash it and update here

I am trying to flash the firmware here but it says file size too big. Any ideas?

I got it running and hooked with UniFi. However I set up the wifi router under AP mode. Means the existing wifi router will still have to be running, but I have disabled the wifi for the old router

I couldn't set it up normally and hook with IPTV as the firmware update failed. So it's now running the stock chinese firmware

Anyone using ac18?

I'm using it, just got it yesterday. Still early but so far it's OK and pretty stable. 2.4G signal is pretty strong, 5G signal is stronger than my previous MiWifi router.

Firmware is kinda barebone, but everything is there for a normal user.

Thinking of upgrading to Asus-Merlin firmware but since the stock Unifi firmware is not available, I'm holding into it.

Edit: Just got the stock Unifi from Tenda MY support. I'm going in!

This post has been edited by fli_guy84: Jul 10 2018, 10:39 PM

thanks for the info!

Hows the performance on Asus Merlin firmware?Thinking to buy AC18 for future UniFi turbo upgrade.

I can only compare to my previous router, Mi Mini with Padavan. I have 4 devices that's always connected to the router, 3 on 2.4GHz and 1 on 5Ghz.

Performance is pretty good. So far, it has been stable for almost 2 weeks and during this time, the uplink is still using the same IP address (meaning, no disconnection at all).

2.4GHz strength is about the same as the Mi Mini, but I can see that it's more stable with no sudden signal dips. 5GHz signal is definitely better than the Mi Mini.

CPU temperature hovers around 68C - 72C and based on what I've read, this is considered normal.

Overall, I'm pretty satisfied for a RM290 router. It's basically an AC68U in disguise. Also, Tenda warranty service is pretty OK too.

Let me know if you want to know anything else.

Nice performance by Tenda Merlin so called.hehe..

HOw about the speedtest? get full throughput?

Yes, pretty much can get full throughput anywhere in my 1000 sqft condo. Granted, I'm using the 30Mbps plan.

Hi all. Recently bought a Tenda AC6 router but cant seem to connect to my unifi. tried to update the firmware but a friend told me that may have fucked it up further. If anyone is able to assist, I would be eternally grateful.

https://drive.google.com/file/d/0B6WcBVRIm_...ew?usp=drivesdk
tenda need specialize firmware

overall i would said is better than unifi stock tp link router
but anyone here able to set up port forwarding for the router?
i tested both on tenda ac18 and tplink from unifi both not working

Hi Bro, is this firmware use able for tenda ac10 and Time Fiber as well.

Not sure is any bro here using tenda for Time fiber too?

Thanks for comments.

I don't think so it can be used for ac10.

Thanks for reply bro.

so chinese tenda can't flash malaysia firmware? :s

Not sure. Haven't referred to the tech support. I am comfortable with just setting up as the AP mode with default router turned on (WiFi off)

if u need vlan tagging u nid specialize firmware to work with unifi as the firmware from tenda website is not compatible with unifi. kindly refer to the seller or tenda Malaysia firmware.

Tenda Msia is using the commonly available with VLAN enabled firmware. The problem I currently face is that when I upload the firmware and attempt to flash it, error would pop saying that the file size is too big, and it will just restart

yaya, same with me lor, then how to flash it?

Didn't flash. Just set up as AP mode, connect to existing WiFi router, disable the WiFi on existing router, voila

Comparing the Tenda Ac6 vs the default Unifi Router Dlink Dir615. Does it match or better in terms of coverage ? Shops were saying in general the coverage is bad, but if its similar or better then the Dir615, then is good enough for me

i can't connect to internet but got WiFi connection to ac1200. but can watch hypptv. whats your settings ? in the router admin page, i choose unifi and dhcp connection seems not working.

i think you need to change it to ppoe. not dhcp.

I’m using this firmware but still can’t connect to unifi. Get the same message- no response from remote server...
Any help?

Anyone able to solve firmware size too large when trying to update the malaysia custom firmware from china firmware?

I also noticed that the ports are all 100 mbps, so i guess the speed is capped at 100 mbps max for any internet link.