Right now I'm still agreeing with u 

Forgot his forum name. 

Havent pay so didnt really care much. Just he promise made me remember after all i helped him acquire some stuff 

No offence intended!

If u could only smell my bag of muji, I think you'd not hesitate to wipe things with it too. The top 1/3rd of the bag was tolerable to use, but the taste (and musty smell) grew worse and worse the further down the bag I went. Either the cotton went bad or my tastebuds became hyper as I weaned myself off nicotine, or both. It's always been sealed properly except when I needed to get a few more pieces to put in a smaller zip lock bag, and I see no fungus or anything growing there. Maybe one day if we can smell thru the internet and I have a nosecrophone I could show u what it's like (assuming I haven't used it all in wiping yet).

Actually unless Team Vape Lab (TVL) has improved their product, I'd still prefer Kendo. There was a point in time when TVL and Kendo were going for about the same price. If u r so inclined, get both brands and u can judge for yourself. I believe Kendo ECO is a smaller packet of cotton good for a trial.

guys, how to refill this RTA... im getting massive leak here...   

[attachmentid=6857317]

i believe now got 2 :

caramello popcorn
naughty doughnut (choc)

i am trying to help them but i dont know where to go also since i dont have any fb so fb groups is a no for me haha. if by any chance you have click ke colleague ke yang into vaping, and willing to join the survey, do let me know ya buddy.

already asked before.

70-30, suitable for both subtank and dripper.

dont ask me what is subtank and dripper i dont know myself do hahaha.

hey u know where i can open tered for free samples liddis?

Anybody know where I can rewrap my batt? Relatively new brown batts last resort shall be insulating tape

Any website that sell USA juice. ?
Mind to share where you all buy online e juice ?

is it true that local fruity juices are more likely to cause gunk quickly than US imported juices?

guys i cracked my pyrex tank of my serpent mini and is there any way for me to fix this? It is not severe but can clearly see a crack on it and the juice is slightly leaking from the glass tube, can i use superglue to fix this i mean, im scared if i use superglue to fix it the glue will probably goes into the tank and mix with the juice

kangertech dripbox volt, 4.18 volt, so high lol.. using build 0.13 22g kanthal, i can fire up to 134 watt.. if my calculation correct lah

i try it with both LGDBHE21865 and awt 40a 3000 mah battery. both giving same volt rate. i already try to build it using alien clapton and getting 0.27 ohm, but the ramp time too slow. the taste is great through.

Who is using efest battery please be caution....throw it away.

just wondering.. how to check on the safety of batteries? Is the problem related only on super low ohm? if I am vaping at o.45ohm and above, would it be safer? I bought a lot of yellow batteries from VE... can anybody enlighten me on how safe it can be?

sounds dangerous by watching this youtube.. thanks for sharing     

hey, anyone knows where to get juices from one-hit wonder?

It's a question of how much power load (in amps) are you running through the batts. Yellows (if LG) should be HE4s, which are good to about 20A. Assuming a nominal voltage of about 4v, the batteries should be good to a minimum of 0.30o (*with* ample headspace put into consideration of course).

Of course, on a regulated mod, the chip boosts and bucks the voltage based on your wattage settings, but the same general rule applies - at 4v, 20A batteries are good to about 0.3o.

You need to Google "ohms law" and understand the general idea behind it, but the takeaway here is that all batteries have a max amperage limit (which differs from battery to battery) and you do not want to breach that limit.

Hurmmm. I knew I should have read that Reddit PSA, but yeah it does confirm my suspicions that wattage is all that really matters on a reg box.

Thanks for the update though, it's a really good summary of the PSA.

That said, IMHO most casual vapers REALLY need to know their basic battery safety, and at least know that NO, those 30-35A E-fests and AMTs (and whatever rewraps) isn't really true 30-35A batteries to begin with.

And how 40A batteries are total BS... at least at this point in time.

Unfortunately the responsibility is shared with sellers (who need to at least inform their buyers of BASIC battery safety), but some of the less... scruplous shops really don't care about that as much as they care about their profits.

Otherwise, we would probably see less of these weird ass rewraps (and bloody clones) on the market.

can anyone suggest me a good scale and where to get one for mixing?

it cant be worr, fill up that ethos in my serp mini, chain puff about 10 times after break fasting meal, then start to feel vomitting.. so this US 6mg is actually our 12mg liquid?

pass me ur watermelon if u still have some.

and yes u are nic overdose.

malaysia nic usually from china and to lessen the throat kick, the mg shows are usually less than what it suppose to be.

mean while us nic usually at 99.95%, which is purer and the amount the put is the amount they shows

hahaha.. yea still feel like need to burn a ciggy.. but i can resist..

if i insist to use US e-liquid, should get 3mg right?

guys please help me out...i got same build same ohm reading on both my Crius and Griffin 25...
both SS316l,like i said same build...
but something weird happen,vape TC mode now,40W 220c,wicking also both are similiar...
fire on crius,it pop like crazy,flavor is wonderful,fire on griffin feel like the temp only like 150c,wont pop no flavor no cloud...
tried switching between them,on and off my rx200,adjust 510 pin,tighten screw,lock unlock resistance but still same...
i check on geekvape website,my tank is authentic...
what's the problem?

EDIT:: nevermind,510 pin problem,seems like my rx200 doesn't like griffin,work flawlessly on my old IPV D2...

Anyone interested to buy second hand (genuine) vaping stuff. I'm quitting vaping for good.

I have with me the following:

1) Vapor shark - RDNA 40 mod (skin peeled off);

2) Vapor shark DNA 200 (good condition);

3) 2 Petri Dotmod V2 (Blue and Black color) with additional 2 sets of spare screws, usually not included in petri purchases;

4) Subzero RDA from SubOhm Innovation (black color);

5) Avocado 24 from Geekvape;

6) Wismec Theorem RDTA;

7) Wismec Skyladon Mech Mod;

8) Aromamiser RDTA

9) The above are genuine products. I have also lots of various clones which I can give them all away for free

10) I have numerous Clapton wires and fused type, normal Kanthal 26, 24 G and Nicrome 24 & 26 G , some from UD and the rest from tempco - which I also can give away for free;

11) I have 4 unopened DRPN Donuts strawberry and 1 recently opened DRPN Donuts Strawberry, which I also can throw in for free (provided the purchase qtty is significant);

12) Cotton Bacon, 1 not opened, 1 partially used - I also give for free...

13) a few LG, Samsung 18650 battery and a Sony VTC4, I also can give for free plus the charger.

I'm new to this lowyat forum, so PM me or email me. thanks

Roger, will put that under the "to get" list. Now need to get through that initial bottle of PD and Cracker first.

Just wicked and juiced the V2 with PD. The initial toot isn't as sweet as the tester single coiler (and "sweet" here being absolutely relative lol) but the different flavour notes are still quite noticeable.

Gonna give the Kendo some time to break in first though, the thing does take its sweet time (especially since I'm using some Eco/Blue now rather than Gold).