Yo.. S478 paradise here? May i join? One of the s478 supporter here. Just got a simple question here. Does any body here know what is the different between Asus P4P800E-Deluxe mobo and P4P800-Deluxe mobo? I heard about that, the P4P800 none E version then is the legendary mobo for s478..

.. Icic.. But i heard that, the none E version does better peformance then the E version? But compare up, this 2 mobo only are almost similiar. Beside the E version got Asus HyperPath for the ram part. The rest are same..

Guys, just some quick question regarding to 478 procs. Im currently owning two 478 procs. Which are 3.0E (12caps) that im using now, and another 3.0C (30caps). Both of this procs are running on same speed, and HT enable. The different just the L2 cache. 3.0E having 1M while the other 3.0C was only 512kb. I was wander, which procs deal and giving better performance. Ofcause in this case i dont put OC into. Due the 3.0C was having 30caps i believe it can do more then the other one.

Haha.. Yea. Was using one o the LEGENDARY mobo for s478. Get it from one of the forumer here months ago. Great performance thou.

Well i just wanted to know the raw performance of this two procs running in stock speed. The differences is the cache memory only. Hm.. I wasnt a hardcore gamer. Mostly did some 2D light gaming such like maple story . Mostly of the time i just do surfing and chatting.

Ever plan to do OC for my current rigs, due the parts are suitable for it. But yet did i cos still in saving money to get better casing and cooling before i can did OC for it.

Uh.. Noticeable of prformance huh.. Thanks for ya information!

Yup.. Haha! I thought i had sold it long time ago. But few days ago i did my room cleaning and found it lie on the drawer for ages. Tested and it still running fine. Keep as backup procs.

But anyways, thanks for ya advise. Planning to change procs once i got enough money for better casing. Atm, my hyper 6+ still cant really give the best shoot yet. Due my old casing was "bottleneck" the cooler. Too pack and causing the air flow not smooth. My 3.0E (prescott) running on 36-37'c on idle. Full load reach 48 highest.

Hmm... Seems like both of the procs got their pros and cons. Btw, just wander anybody here using hyper 6+ this cooling system? Whts the minimum temperature that u guys ever archive?

Lol.. Yea.. But not now. Rising fund for getting a better cooling and casing then will squezz the juice for this two procs. Haha. Opss.. Some offtopics here.

Tomorrow my place here will held PC fair. Hehe.. Going to hunt some stuff.

Yo pals.. Thanks for the information! Hah.. Mine are roughly like urs. But my fan only run at 1500-1600rpm!

Edit: Typo!!

This post has been edited by fylon: Apr 5 2007, 06:06 PM

Haha.. Yea! Act its my fren's proc. He burned his board and change to another rigs. Then sold me this procs for RM200 two years ago. But i was forgotten where i keep it. Recently then found. Hehe.. Hmm.. My ram? Currently running on mixed 2x kingston 256mb and 2x hynix 256mb. Both are dual channel with same CL. Dont dare to OC due the ram was from same factory. Actually my current rigs was from emmeir (one of the forumer here. )

Yea.. Im from kuching. How about you bro? Same? Lol.. Yup! Go there for some window shopping. Was looking for graphic card. Hope can hook 7300GT.

Now cannot lo.. Having exam. Maybe wait exam finish then try it. Hehe. My current board only give until 30% max AI overclocking. Guess if want to go pass 4ghz need to adjust vcore right? Im new in OC. Still learning!

Haha.. Icic!! Good! Nice to meet you.

Yup.. Well well.. U know i know. Kuching pc parts price are insane. I went to compumart past 2 week and ask about 7600GT price. Guess how much they told me? 650 and need order. Thats crazy.

Lol.. Learning now. But need time to to practical. Pray that my board dont burned out during test time!

This rigs? Hmm.. The prcos and mobo cost me around 500 lo. Resonable la hor? haha.. But i think its worth. Seems the mobo are extremely rare to find nowdays.

Now really dont dare to do OC yet. Provided i got a better casing then i will try it. Currently using cap palang casing which are too small too pack. The cooler itself are big already. Haha.. But still can maintain stock temperature in between 36-38 lo. Due to Prescott core = heat monster. Haha.

Wah.. Just home from PC fair. Gosh! Nothing much there. Mostly sell laptop and others. 7 series AGP all not available. Yea.. Agree! Kch price are sharp! Next time will look at LYN instead of local shop. Even + in shipping also cheaper then on shop price.

Hha. CM Hyper 6 match my mobo dont worry. Just my casing become pack after put all the thing in. No worry. Wanna did some casing arrangement and do abit OC and see how the thing goes.

Haha.. Yea yea!! Agree with edministrator. There just a name PC FAIR. But inside there all was doing cleareance stock business. Nothing much to see actually. Dont go. Its a waste of petrol and energy go there see nothing good.

Hmm.. Just did some cable management all hide some junk cable up. Now the casing looks more tidy. Haha. My pc side panel only closed when i do room cleaning. Rest of the time is open. Lol. The cheapest way to cool down ther cpu.

p/s: Just hit 3.3Ghz wth my 3.0E at running at 38'c idle temperature. Trying to squeeze more!

Agree. But hor.. My cap palang casing will make the whole system heat up if side panel is closed up. So i got no choice to on let it on! haha.

Err.. Any other software can use to stress the clocked cpu beside prime95? Hehe.. Try it tomorrow.

Haha.. Yup!! Cant find any case there. Nothing new.. Cant even find a casing. Faint with the pikom. Making the fair just for ther seller to clear their stock item~

Hmm.. Had run my prime95 for over 24hrs. PC didnt hanged yet. Is that consider the OC is success? Haha.. Currently running on 3.3Ghz. Rise 300Mhz speed. But didnt feel any improvement..

Anybody had try with PCmark05? My current rigs score 3200++ only.

Haha.. Yea! Its pcmark05! not 3D mark. Btw, you hit 4k+ with 3Dmark03 with the saem GC as me? With my current GC i only archive around 36++ in 3Dmark03. And its DDR2 version of 9550 somemore. Wander why. Seems vary from ours. Did u did tweaking on ur GC such like OC to get that score?

Yea.. Its diffferent lo. Haha! PC mark is for PC. But only get around 3200+. Try squeeze my procs more. See can break 4k. But pray that the procs wont burnded.

Lol.. Welcome to the house of s478 k!nex! Haha! Hmm.. I thought most of the intel chip multiplier are locked. Unless ur lucky enough to get the unlocked version which are dam dam rare.

Btw, chips with northwood core are having better pontential to clock right?

Lol.. Thanks for info bro. Sorry.. Im fresh in this. Need some feeding.

Btw, can anybody tell me that how ram's timing affect the overall system performance and reliability? Im currently running on 2.5-3-3-6 timing for RAM with ratio 1:1 according to cpu-z. Is that ok?

Hm.. I dont think that voltage regulator will fixed the problems lo. Since is mobo itself which causing this happen, mobo cant operate in the exact value of voltage. So, even a place in a voltage regulator in the mobo itself also wont help. Anyways, this only my two cent.. Correct me if im wrong.

Lol.. Guys, got a question. Just hit my 3.0E to 3.4. Prime for 25hrs no error stated. Count OC success. Kinda happy. Just wander, is time to touch the ram by now? Or just let it be at the current speed? currently running at 2.5-3-3-6. Whats the different with tighten the ram and lossen it?

Haha. Yea.. I do read the pinned thread. But just for make sure then i asked here once agian. Sorry if causing inconvenience. Im still noob. Usually, i did in the way with push the FSB to certain limit then log into the windows. Run stability test and see as if the system is error free or not. As if got error then i reduce back the speed. Cause im now only have 1 mobo with me, backup were sent to RMA. So i take safety way to OC my system. Make sure i rigs still got life to spent before the backup back from RMA.

Its ok. About the ram chip ICs, i still not so sure about it. But will check it out after i off the pc tonite. The information about the chips are important interm of OC the ram right? I did my homework in learning about OC.

Guess it no problem for mixed up the rams. But make sure the rams that ur gona mix together are running on the same speed otherwise performance will be dragged. Ie. PC3200 mixed with PC2700, overall the ram will only run at PC2700 speed. Correct me if im wrong.