Ops i'm sorry, thank u for the guidance.

how much

Can't remember d as I bought a long time ago for doing cabling on my computer table.

Is it advisable to switch off the wifi function when we're not using?

Yes. The dashcam will be less hot.

Thanks for the tip

Hi Sifus,

Need help.

I have Yi Dash Cam (CA21W) model.

It is already on the latest firmware Chinese version V-1.03.026-CN.

Me and my itchy hand went and try to change it to international language version.

I followed the below steps.

rename my first 14 digit S/N from CN > US, save it to SN.txt
then create a file engmode.
formatted my micro sd (via yi dashcam)
then transferred the files over to the micro sd(using Micro SD adapter n transfer via laptop)
then i insert the micro sd then only connect the power.
then a blue screen showing Firmware change, nothing happen.
then waited it rebooted the device.
i dont get any engineering mode as claimed.
shit happens here whereby i get error stating "System adaptation failed, Access Denied" but in Chinese.
so i go download the latest FWCARC10.bin from the yi technology website.
so i copied over the FWCAR10.bin to micro sd.
but still cannot flash it as it keeps starting up the dash cam and stuck at that error message.

Any help is highly appreciated.

Thank you.

Um... Sounds like your Yi dashcam has bricked during the flashing process...

Not sure if this will help, can try here:
https://dashcamtalk.com/forum/threads/firmw...e-others.29597/

tried but doesnt work.

Any idea how i can change back the US to CN?

Any sifu out there done it before?

this is exactly like my issue -.-

https://dashcamtalk.com/forum/threads/brick...ont-boot.28225/

This post has been edited by [JackAss]Uncletan: Dec 27 2017, 11:32 PM

Hi All Sifus,

I got it fixed.

pheww... big lesson...

The key is to get the correct memory card.

i was using 64gb all this while and i tried to flashing it but it did not worked.

hence i change to a 32gb class 10 card and redownload the US version of emergency aid and it worked like a charm.

settled sleep

-n-

mi jia dvr lcd screen quality no good. Recording quality so so

Ok

This post has been edited by blurjoey: Dec 30 2017, 10:22 PM

Guys just installed the xiao Yi dashcam ADAS May I know how to unable the function of the sensitivy due I keep drive near the car keep come out warning lol

Click the right most button to go to settings, then scroll to ADAS and click on the right most button again to disable.

I want to know if my unit is a little defective, or it's normal. The dashcam just been started up like 5 minutes and on a cooling night but I feel that the sharpness is really bad. It's very grainy and not like some of the sample video out there.

Recorded in 1296 30P. On V-1.03.026-CN firmware.

Anything I can do to sharpen somehow?



This post has been edited by tifosi: Feb 10 2018, 09:14 PM

Try 60p

Is it ADAS ? Cause when the front car near me it keep come out said don’t stay too near in front of the car

Just off the ADAS as the Yi dashcam ADAS will give a lot of false alarms. Which is damn annoying.

Actually, the videos look normal.

Also, the 1296p is actually interpolated from 1080p. Best to just use 1080p instead.

Guys this is my first dashcam i have gotten and it is in chinese,i just need to be sure in somethings.
1.Mine is the Yi Black Power Edition, i put in a 16gb sd card will it delete the old files by itself once it gets full or i must do it myself or else it won't record anymore?
2.Can this cam work on 4g or just wifi??