it is simple... just separate the blade out from the housing.. u can remove the clip which holding the blade at the center by removing the sticker. The just spray it off..walla..

Mmmm...maybe u can go to vizo windstorm if your ears is fully sealed...lolz...

can u tell me wad is fluoresent paint??

Coolermaster 80mm led fan or just plain black fan.
i used that on my s478 system, (actually it's bundle togather with the
CM centurion5 case), it's silent and push enuf fresh air, and also pretty cheap.

Get some order from my supplier =) But normally i not get those 120mm fans, coz there are low demand in melaka.

Somemore, cpu easy get dust if add a 120mm on side panel

i talking bout 250mm fan bro not 120mm fan.

if u able to get me 250mm fan not iCute brand. PM me.

thanks.

Sorry, typo error
i means 250mm =)

I plan to buy some 80/92mm DC fans as the casing fans and CPU heatsink fan. Which model is the best in the performance of both cooling and silence?

Normally high air flow fan is not silent =) Best performance hsf always not silence =)

Maybe u can try xigmatek red scorpion ^^ or scythe infinity

thinking of getting some Suscool 121 for my pc-a05 casing and cooler, do guys think its worth it?

If u want the fan's performance and nice look, it's worth =)

What does it mean when a fan is UV reactive? Sorry noob here

Well, to be honest, unless you really needed something that is totally silent, i wouldn't really recommend the Suscool. I mean, i am a pure supporter for Silverstone fans and they are absolutely good. But to be honest, the Suscool don't really meet my expectation (maybe its too high perharps )

Anyway, if you are really into something silent, i would gladly recommend Noctua over the Suscool but the problem is, its not available here. The Noctua is better than the Suscool to me. Put a dust filter over the Suscool and you will feel down to no air coming through.

It glows under UV lights

Anyone know where to get this fan ? looks really cool . Is it ready made or modded? thanks

I think you can buy the aluminium fans anywhere, but the cone on the motor head.. maybe a mod add on.

its a modded add-on by mnpctech la.. only they sell like that.. if u want like that, u modded la the motor head.

what material do i use to make the head ?

Oh, I see.. thanks

but.. can anybody guess what's my next question?

u can use from wood or anything alike the motor head.. depends on ur creativity.

this is mnpctech fans mod tutorial, for the motor head + turbine fan alike.
>> click here <<
to mod, if u think this is not suitable, feel free to remove it.

@Prodigenous Zee
u want to ask what is a UV lights?

This post has been edited by m2n-e: Mar 31 2008, 06:47 PM

yes

But I have read the sticky here, and I think I know what it is. Basically it's those ccfl light rods right?

This post has been edited by Prodigenous Zee: Mar 31 2008, 06:52 PM