Congrat on new car 

From where to Ipoh? Hill drive is nice with M3.
Be careful and safe journey.

already tried it last week, 150 km/h feel like 50 km/h only if minus the noise

when around tapah hill area, try change to 4th gear and keep your rpm above 4k, can really feel the push when the car accelerate at maximum torque

Most of the time I'm with my GF only, barely will take people at the back. City driving, I keep it at 250kpa and I felt the tyre roar become softer. On highway, I will pump more to like yours, 270 / 280 kpa for better rolling.  Perhaps it's just my own opinion la..  :thumbsup:

Did your car steer to the left when driving on the straight road? I noticed mine will slowly steer to the left, hopefully is just the alignment

If the road noise bothers you, you can turn on the auto sound leveling to +5 to cover the road noise

But after a while the road noise didn't seems to bother me la

Next time you can try 130kmh throughout the journey and 170 for a few minutes

So fast gatal meh....aftermarket 18in not cheap leh...

I sent my car to do balancing & alignment on the day I collected my car, usually will not that accurate from showroom. I did the same on my 2 previous cars, first thing after collected the car is to my trusted tyre shop to do balancing & alignment.

It seems like the engine bay of m3 insulate heat very well, even after 2 hours parked under shady area after 1 hour city drive I still can feel the heat rushing out like volcano when I open the bonnet.

Is it higher CC car also like this?

Am getting the car very soon. Just got loan approved yesterday. CKD Hispec. Going to sign the loan agreement tomorrow at the showroom. Getting so excited. Apparently the salesman told me that if I want to wait for latest batch (2016) have to wait by end of April. I told him just take the 2015 batch (but still be registered in 2016) for fast delivery and I did.

Hope I made the right decision.

Just changed mine 2 weeks back. Waiting for the Eibach to arrive to compliment it.

What I know:

Engine oil: Take note that there are some SC provide 2 FULL SYNC Engine Oil(EO) from Shell. If not mistaken la,
1. Topup RM 150+-, Full Sync with grade 5-40w or 10-40w. Can't remember. Hope some members could clarify.
2. Topup RM 220+-, Full Sync with grade 5-30w.
1. Never heard of "tok" sound. Instead of "tok", oftenly we heard is"kruk kruk" sound. Occurred mostly when the vehicle passing any uneven road surface or go over a bump.

2. No idea. My car didn't create such noise. Lucky though.

3. "Tik Tik" sound. No idea. But noise source coming from center of dashboard, you may want to check the your sunglasses holder. Else, let SC to identify for you. 

I also upgraded from Persona. Well, it doesn't sounds like orchestra. Because I will try to identify and eliminates the noise as much as I can, same as in now.

I still trying to figure out the way to eliminates the ticking noise coming from the glove box on passenger side. The black box is creating the ticking noise, no matter how I tighten the cables with cable tie, squeeze some sponge inside. The noise is still there. Damn~

The semi is good enough. 6 months oil change is actually considered very short, even decent mineral oil (Honda has mineral oil option even for 10k km oil change) will still be quite ok at this point. My opinion is to just save the cash and stick with the free oil. For the price they charge for the fully synthetic upgrade, can get even better fully synthetic oils if you know where to find.

For me, I just go with the free oil and the car still performing fine as I'm approaching my 3rd service schedule soon. The free oil is lighter, so the engine can rev faster and save a little more petrol. Only go for fully synthetic if you love to rev the engine hard, always have heavy load, crazy jam all the time of your driving and/or a lot of uphill drives.

Enjoy your new ride

Just collected the car last Friday. M3HS. 1st 10 mins after driving the car from showroom already noticed:

1. Front lower arm 'tuktuk' sound going over speed hump
2. Clunking sound coming from the rear side (something like light zinc metal sound making contact to chassis/other exterior metal parts) when going over uneven road.. Already check spare tyres, Jack, tools all in secured position.

Will the SC be able to assist this issue when I send the car during 1st 1000km service? I hope they won't give any BS excuse (by looking at customer's complaints over social media) not to fix this kind of issue. How's the Mazda procedure for sending in the car? Can just walk-in or have to set an appointment?

I'm probably the odd one out.. Am getting an M3 Hatchback soon

Anything I should look out for upon delivery? 

Bro, which SC you went?