Jun 29 2016, 06:54 AM
QUOTE(trix @ Jun 27 2016, 09:21 AM)
[url=[/url]
in russian, but should be understandable to follow
let me know if you need clarification on any part
basically:
1. install developer firmware so ssh can be enabled
2. setup VM for linux (if you already have linux machine, then use that instead. and doesn't have to be vmware workstation, can use others instead like virtualbox)
3. download and run prometheus
4. gain ssh access on router (if this doesn't work, use the steps i gave previously)
5. prometheus to pull source from padavan
6. build toolchain (only needed once, unless there's any update on toolchain source code)
7. configure and build firmware
8. flash firmware
not using breed bootloader, prometheus installed u-boot instead
i'm using mi-mini and mi-3 at 2 different houses, so can't compare them side by side.
but mi-3 replaces tp-link tl-wr1043nd v1, and coverage is much better for 2.4GHz network.
i don't really use the available flash space for anything else, so no comment on that part
previous build, nope
latest (cc58fc3), yes
i've removed QoS since its unsupported and can't be configured from webgui
config file used to build the firmware is also there on my google drive for reference
I am on your most recent build. (cc58fc3) (Thanks for making these available!)! I am attempting to use owncloud and lighttpd via entware-ng however it keeps telling me "Note: "smbclient" is not installed. Mounting of SMB / CIFS, SMB / CIFS using OC login is not possible. Please ask your system administrator to install it." under the section to mount external storage. I'm trying to mount some smb shares from my freenas server. Any idea what I need to do to make owncloud recognize it? Running the command via ssh still shows "-sh: smbclient: not found"in russian, but should be understandable to follow
let me know if you need clarification on any part
basically:
1. install developer firmware so ssh can be enabled
2. setup VM for linux (if you already have linux machine, then use that instead. and doesn't have to be vmware workstation, can use others instead like virtualbox)
3. download and run prometheus
4. gain ssh access on router (if this doesn't work, use the steps i gave previously)
5. prometheus to pull source from padavan
6. build toolchain (only needed once, unless there's any update on toolchain source code)
7. configure and build firmware
8. flash firmware
not using breed bootloader, prometheus installed u-boot instead
i'm using mi-mini and mi-3 at 2 different houses, so can't compare them side by side.
but mi-3 replaces tp-link tl-wr1043nd v1, and coverage is much better for 2.4GHz network.
i don't really use the available flash space for anything else, so no comment on that part
previous build, nope
latest (cc58fc3), yes
i've removed QoS since its unsupported and can't be configured from webgui
config file used to build the firmware is also there on my google drive for reference
I verified that the config has:
### Include CIFS (SMB) client. ~0.2MB
CONFIG_FIRMWARE_INCLUDE_CIFS=y
*update* Solved. I did a search for smb and cifs....and so of course the entware package was called "samba36-client"
This post has been edited by FameWolf: Jun 29 2016, 07:09 AM
Quote
0.0349sec
0.95
6 queries
GZIP Disabled