FameWolf
I have the same issue, not sure why.

Anyway, just compiled my firmware and had issues with HyppTV having no signal. After reading some posts, it is due to Multicast Traffic settings. HyppTV works again after disable the setting below:

Be aware the Xiaomi development software is dangerous and you shouldn't stay on it any longer than necessary.

http://en.wooyun.io/2015/07/06/A-Review-of...rs-Browser.html

guys, wanna check, do you guys get RxDropFramesFilter increasing drop on WAN?
i keep getting increased counts
not sure where to configure to reduce this

what is the number are we talking about?

something like this

Port Link : 100 Mbps, Full Duplex, FC OFF

MIB Counters
----------------------------------------
TxGoodOctets : 150790512
TxGoodFrames : 1340188
TxBadOctets : 0
TxBadFrames : 0
TxDropFrames : 0
RxGoodOctets : 3344566849
RxGoodFrames : 2660835
RxBadOctets : 0
RxBadFrames : 0
RxDropFramesFilter : 64647
RxDropFramesErr : 0

The RXDropFramesFilter keeps increasing

I cant even connect to my router at 192.168.31.1 to do flashing.
I have setup it to do wireless sharing.
But connecting to a lan port to my PC only get the IP 169.254.145.74

Can I just use the original firmware if not using IPTV? Just for internet...

Hi guys, i just got my mi 3 router and able to connect to internet wifi via mobile apps using wifi key same as SSID name. The problem now is on the apps need to pair the router and key in pairing/admin password which I didnt know. While using the apps, I also unable to get the same screen as shown above like use the wifi key as admin password. the screen go straight away to pair the router and require to key in admin password. I try the same key as wifi key/SSID name but got wrong password. Is there any other way I can bypass and go straight away to the router config without using Apps and connectivity via wifi? Maybe all you guys can help me regarding this issue. TQVM.

why so troublesome? i thought just configure the account setting in BTU and then just share the internet from LAN of BTU to WAN of xiaomi router is enough right? http://tuxfirewall.com/unifi-how-to-config...wei-hg655a-btu/
IPTV can be connected to BTU itself, no need through router

This post has been edited by tan_aniki: Sep 5 2016, 04:31 PM

[quote=trix,Jun 27 2016, 10:21 PM]
https://www.youtube.com/watch?v=VQ35zI8W3ns...ix2zecfvmrvxw0k
in russian, but should be understandable to follow
let me know if you need clarification on any part
basically:
1. install developer firmware so ssh can be enabled
2. setup VM for linux (if you already have linux machine, then use that instead. and doesn't have to be vmware workstation, can use others instead like virtualbox)
3. download and run prometheus
4. gain ssh access on router (if this doesn't work, use the steps i gave previously)
5. prometheus to pull source from padavan
6. build toolchain (only needed once, unless there's any update on toolchain source code)
7. configure and build firmware
8. flash firmware


Bro
Can u elaborate more detail. Im using Virtual Box to run prometheus but nothing happen. How should it look like. if you have SS for the process it might help.

Thank you

Yikes the link for the Breed Bootloader is broken, is there any otherway to obtain it?

EDIT:
Found the link from their site

This post has been edited by TerryZeroX: Sep 25 2016, 03:48 PM

Do they have a version that's all in english yet?

How is the wireless repeater work in this firmware?

I don't think so, just follow the guide on the 1st post from this thread you should be fine Perfect firmware for the mi wifi mini. After countless try on pandora and openwrt I was about to give up then i saw this.

I was referring to the breed bootloader. I have the padavan firmware working fine.

No. You still need to do VLAN tagging for both UniFi & Maxis Fibre
For TIME Fibre, no need VLAN tagging

flashed the router as per first post. And enjoy using it.

One question, is there any easier why to update the transmission (for torrenting)?

How do I revert back to original ROM?

Hi, I would like to thanks the TS for the thread and sharing here.

On yesterday night I finally find the time and guts to flash my Mi Mini router with Pavadan following the instructions from here and pavadan firmware from <here>.

http://plol.eu/how-to-install-a-full-spec-...mi-router-mini/

I was setting the mini router as repeater (AP + WDS) on 5ghz wifi to my Xiaomi Router 3 (original firmware).
The router was spacing apart with 1 wall, distance around 7-8m apart and I checked the status from pavadan the STA are linking at around 4XX-5XX Mbps which better than my powerplugs.
Within 3m apart, it was link at 7XXMbps which extreme good for me.

Overall I'm very happy with it, however problem seem getting from Xiaomi Router 3 which whenever I reboot Mi3 the wifi channel run even I have set it on fix channel. Thus is break the link to the repeater.

So now, I'm thinking to flash my Mi3 (router 3) with pavadan.

Being a newbie to this, I want to know if anyone have build the firmware for Mi3 for sharing here?
I'm not very good with linux and prometheus, worry that I screw up my Mi3.

This post has been edited by muncheno: Oct 7 2016, 04:21 PM

I used the prometheus script to flash padavan to my mi-3. You either have to jump through some hoops or downgrade the firmware on the mi-3 to a version that allows ssh. The script can then interface to build and flash padavan. Not sure what else I could tell you. You can't just share a file. Multiple partitions get flashed on the mi-3. You HAVE to use the script and compile it then let the script do the flashing.

This post has been edited by FameWolf: Oct 7 2016, 04:29 PM