the inlet is facing down and the exhaust is facing the rear of the motherboard........

basically it's a blower, and it will suck heat from the heatsink and blow it to the rear..

works well if the heatsink is ducted nicely

Today's update

Pimp shot of the morex power kit



Done up the panels di..

Don't bluff! Ure Sumpron will oni be finished sumtime in the year 2008.




Wah! Toy? Powered by AC? Does it vibrate?

You don't talk so much

Panels all already cut... tomorrow stick it all together..let it set for 1 day... Monday pasang all the hardware... Tuesday spray... Wednesday and Thursday for troubleshooting.

Before end of next week --> Kau tim.

ps: Adoi... the Morex power kit lar.... AC adaptor --> DC to DC board --> PC lar.

manatau? This is after all, a pron rig!

pretty good workmanship man......,and you meant porn rite?...... ,don't be pissin the missus off man.....

Updates:

All the panels are joined ( doing the sides now) using metal L-brackets. Since it's gonna be painted anyways...these are stuck using epoxy which also acts to fill up gaps between the lines. Hope they're strong enough though (advertised to hold 2500lbs per sq inch)

what PSU is that and how many watts can support ?
and the most important thing is that how much is it ???

That's Morex's 150W power kit. Not something you would wanna use for a full powered rig

Specs are here:

http://www.morex.com.tw/products/productdetail.php?fd_id=64

Paid about RM300 for it

Better still is mini-box'es Picopsu but that's hard to find and more expensive to import.

hmm.......at that price i think can get a 1U PSU which is 40mm thick already and +/- 450W of pure power...

the PSU is enough for all the things installed ?
like the HDD and procs like that.....

Sure.. but that takes up much more space and it's freakin noisy after the heat builds up.

Anyway..the morex kit should be enough for most mobile cpu's...even an X2... as long as don't put in a VGA.... single HDD. Bare minimum stuff lar.

it's noisy all the time coz the fan inside is uber fast, standard ones should be more than 10k rpm.....


are you sure that the power is stable ?

fuwah first time i see a power supply like that

you got that in taiwan right Sniper

aqua safe made by akua?. joking~

nice case. but how are you going to plan on placing the hard disk and possibly the CD-rom? 150w is kinda low. even if you use it, it's gonna build up alot of stress on the ac-dc adaptor. more over there is no cooling on to it. don't get me wrong, just a bit concern la. dun want you to fry a rm300 gadget. in malaysia, we do have such adaptor but its more on car use. dc-ac where it is to provide household power on to components like laptop in car.

Should be ok lar....using lappy HDD (scored a 5400.3 120GB) and lappy super multi drive.

Main issue is the psu cables berlambak only.

Last pic for tonight... overkill kau kau on the epoxy cos I need the structural integrity.
Waiting for it to cure.

Tomorrow's plan is to do up the rear i/o panel and to sand the rough surfaces...fill up the gaps etc.

how u gonna use ur lappy super multi drive on desktop pc?

What are the exact dimensions of the box man?....

Huh?


EDIT: Added pic of the converter





255mm wide x 215mm deep x 95mm tall

This post has been edited by sniper on the roof: Dec 18 2006, 02:37 PM

Fuyo, like aquarium only hows the ventilation btw ,macam choking inside like that