Per my taste, I like it cause it's slim but as mentioned before, a little slippery at the sides. So, just have to take cognisance of that and be careful. Aesthetics wise, can be better. Neverthelesss, not too shabby a case.

Agree. It's sleek and slim and looks very, very nice with the black and jet black front

is anybody here using the sandisk ixpand? care to share your opinion on this device?

planning to use my i7 32gb for at least 2 years. In future, might come in handy to hold the extra storage.

mostly people here discuss about accessories are phone cover. Anyone of you have any recommendation on Bluetooth In Earphone ?

Actually the front for both the blacks is the same because it's glass

Yup, but the silver, rose gold and gold ones have a white front, which doesn't look so sleek with the Liquid Armor

If you take off the case, does it leaves imprint of the inner design of the case at the back of the iphone and is it easy to wipe off? Found that many users complained about this issue.

Really? That did cross my mind for a brief moment. I don't actually know cause only had it on just yesterday.

It's not so bad, but the Spigen ones with the cut-out hole that shows the Apple logo will leave an imprint if you don't clean if often.

My 6sPlus is rose gold and therefore white front and I do not use black casings for it. Likewise for my other phones which are not black. But some may like the contrast.

Thanks for the heads up. Found out there is concern of permanent imprint on the back even with skin protector on. This is due to the pressure from the inner design uneven surface. Some say you can rub it off very hard with cloth but envision the constant design pressure for 1 year later?



This post has been edited by Yen8on3: Nov 17 2016, 02:28 PM

After zad78's comments I immediately removed the Liquid Armor case and used the FShang flip case I bought a couple of days ago. Must say, it's not too bad.

My intention is to get a back protector to apply first before putting back the Liquid Armor. Could I just clarify with you? Is the imprint on the back protector or your phone? It could well be that if there is no protector there may not be any imprint as the protector is soft and prone to imprints. Which leaves me in a dilemma...

can try jabra ones, not bad

Due to the uneven surface inner design, the pressure will cause an imprint on the phone. Why take the chances on an expensive device? I am sure there are some other Black TPU cases without the inner design for the iPhone 7 Plus

where can i find 7+ camera lens protecctor?

Are you saying the picture with the imprint you posted, is on the phone?

If you are in PJ, go to Sunway Pyramid, the floor where all the IT stuff are at.

Yup, this is the other one I have.

Finally my slickwraps case is ship out.

whoaaaaaaaaaa the imprints look really bad for a 1 month old phone. Shoot..might have to re consider another case if it sticks to my phone after 2-3 days use