Going to 15" won't increase comfort as you'll be running on 195/50/r15 tyre. 50 profile tyre isn't that thick. 195/55 would be better but it'll sagat the fender.

14" is your best bet to maintain comfort.

This post has been edited by akmalrosli: Dec 8 2015, 12:14 AM

L gear is called low ratio if I'm not mistaken, not low gear.
Torque comes earlier on L gear compared to D. And also a whole lot more of engine braking

v12kompressor has gone beyond 160km/h on L few years ago. Got picture proof also ahahah

As for S mode on preve, I can't comment on that as I've never driven one before.

This post has been edited by akmalrosli: Dec 8 2015, 07:23 PM

Hasif, saw you commenting on a Facebook page about the ducktail spoiler. So pasang already or not? Haha

Moral of the story. Sellkarbuyvios

Yea spin spoiler. Looks amazing on red sagas. Damn clean looking.


What brand is the crank pulley? Ive been looking at either the works or the mythelogy crank pulley for quite some time now. Mythelogy has a damper but not sure its worth the premium over works eng cause of that damper.

This post has been edited by akmalrosli: Dec 16 2015, 04:32 PM

Stroking the 1.3 yinjin to 1.6 idea keeps ringing in my head. And I kept telling myself, no it's not worth it.

And a few days later, the idea comes back and I want it again ahahah.

The extra 15HP and 30Nm of torque is sure as hell tempting.

Ecu will calibrate itself, no need to to change. Injector, throttle body all no need to change.

So basically crankshaft and conrod only.

Alternatively, can try find 4G15 from Mitsubishi Colt Ralliart. 152hp 210Nm

Welcome welcome to this thread

Come belanja us some pictures of your ride.

Jom

Thanks for the idea

Just scored one for RM110 for the bluetooth clarion unit. By the looks of the back socket for both, it's plug and play.

Will update when I receive it.

This post has been edited by akmalrosli: Dec 29 2015, 01:08 PM

My sv doesn't come with front speakers. Tbh I don't even need them. Only need the aux port cause gf bising already why your car no usb port. Listen to same CD only. Go buy vios pls lol

Where where? got link? cannot find also on the web

Mudah.my got plenty. Price depends on your negotiation skills

This post has been edited by akmalrosli: Dec 29 2015, 11:01 PM

I believe the clarion unit for the exora's uses the common ISO 10487 connector. (Clarion PW856406)

Here's the exora's clarion unit back panel. The red and white rca cable is the auxiliary input. The cable beside it is the steering control cable.


And here is the back of the Clarion PW855388 that comes with our Saga flx. Only with our headunit, the plug is extended with a wire.




ISO 10487 diagram. ; (Ignore Row C). Blaupunkt from the persona has Row C for steering controls, AUX input and etc.





Should be plug and play.
I'll be getting the unit tomorrow. I'll update you

This post has been edited by akmalrosli: Dec 30 2015, 03:25 AM

"Exora clarion" "exora cd player" "exora headunit". I played around with the words.


This one is selling for rm200 for the bluetooth version. All the way in kelantan. http://www.mudah.my/Cd+Player+exora+cps-42586132.htm

This seller is from balakong but no bluetooth for rm200
http://www.mudah.my/Exora+ori+cd+player-43008608.htm

Update on the exora's head unit.

I was right on the ISO connector being the same. Everything works like a charm in the terms of sound, power etc.

The mounting however, doesn't fit. The stupid design of the exora's clarion has a slight angle upwards to it. It's not a normal double din. It fits in our center console with our original mounting bracket. But the centre console piece that goes into doesnt fit back.

Thank god I brought all my tools before meeting yhe seller. I took off with the head unit. And I tried putting everything together in my Saga in the 1km vicitnity of the seller. After I knew, it won't fit. I packed everything up and text him for a refund as it doesn't fit. Thankfully the nice guy accepted it.

I offered him to refund me only rm100 as to rm110. He initially wanted to give the full amount but I insisted.

There goes my dream of having an OEM looking player in my Saga.

This post has been edited by akmalrosli: Dec 30 2015, 05:35 PM

quote=davidke20,Dec 30 2015, 07:11 PM]
No understand how it not fit. U mean the facia plate slanted on the EXORA unit? How bad the slant is? If I were to cut the centre console holder, will it still fit? Ayam also not very hepi with my current setup since got a big lobang, but I don't mind if there's a proper unit that fits well where I can cut the centre console holder to fit.


Belanja die je ke? Yg lain?

[/quote]

Yes the facial plate is slanted. Badly.

This post has been edited by akmalrosli: Dec 30 2015, 09:13 PM

Happy New Year! To more mods ahead