Can my Snow Wolf use this battery?

any Eiffel T1 165w mod user here ?

As describe, it has a 4000mah battery build in. but i feel that the battery life is shorter compare to kangertech. And also the battery indicator are not that accurate.
Anyone here facing the same issue like me ?

with that budget only can get ego ce4 + cheap liquid.

Not sure my friend, maybe the experts here can tell you. All i know is, bought a full size lemo rta back then from VapeEmpire, darn the screws became rusty after a wash. Bought another unit again from somewhere else and it was all perfect no rusty screws until today.

brah that is too low to start.

most of 2nd hand stuff complete set ( mod + tank ) start at RM150 .

this not include juice and other stuff like cotton, coils and battery

Your 24g nickel have lower resistance requiring more wraps to have the same resistance as your 26g nickel coil.

wtf ? u use nickel with mech mod ?

The lower the wire gauge, the lower the resistance.
Example:
26 AWG Kanthal 5 wraps at 2.0mm = 0.56ohms
24 AWG Kanthal 5 wraps at 2.0mm = 0.38ohms

Thicker the wire, the less the resistance as it is more conductive.

You're using 24AWG Nickel???
JUNK IT.

Im not sure theres any mod or atty capable of using that.
Standard TC mods go as low as 0.05-0.1ohms.
So frankly speaking to reach a modest 0.1ohm using 24AWG Nickel = 16.5 Wraps at 3.0mm.(This is a big ass coil we're talking about)

One more thing, DONT use Nickel coils on any mod unless its a TC mod.
Nickel will degrade and release chemicals at low temperatures compared to Kanthal, so unless u want to poison yourself and or other people then stop immediately!

So again, junk that useless coil, unless its parts for making a bomb
Most common ones 24/30, 26/32
Yes u can make 24/26, but it will be ugly huge and imo juice absorption will be weak

This post has been edited by kuli2sahaja: Oct 2 2015, 11:06 AM

anyone want to buy hotcig dna200?

Vapemail!!

Got my squonk-ready lowpro today!
It is a straight up b*tch to build & wick with..baru gune kanthal..belum ni200 yet..but once u get it right..perrgghhh
Hello flavour town!

This post has been edited by que0788: Oct 2 2015, 11:13 AM


Attached thumbnail(s)

i have spare subox mini for 230

classy looking setup. niceee

current setup: ipv d2 + goliath v2, Ti 26awg, 6wraps, 350F, 20J.. very nice vapor + flavor no burn taste at all

Hi all..!

Quick question. Just got my Aeolus dripper tank. It has 3 posts.

When I mount 1x 1ohm coil, the resistance reads 1 ohm.
But when I mount 2x 1ohm coils, how come the resistance now reads 0.5 ohm?

I chain vape, so I don't like sub ohming because it sucks the battery dry damn fast. I try to keep my builds at 1 ohm.

http://www.steam-engine.org/coil.asp

this website is very good for you to build your own coil.

2x 1 ohm is definitely twice the resistance.

you got money? It is hell more expensive than vtc5

bro. it will split the resistance. if u are targeting 1ohm with dual coil. you should build 2x2ohm.

Schwartz The Upside tastes so damn good.

Anymore quality yoghurt-y liquids out there?

vapemail from where ?
btw u found squonk tank ?

Get Samsung 25R green.

You'll have to check the length of the battery compartment first.

I use that battery for flashlights.

It's too long for the IPV 4s's battery compartment at least.