well, its HHKB dude.....

That's the keycool 84-key keyboard. Only rmb369 via taobao (non-inclusive of shipping)

http://m.intl.taobao.com/detail/detail.html?id=22533396680

when will these be up for sale big god?

why not save the hassle and just buy from TS, quovadis123 which have sold the o-rings to many forummers

looking at your signature more bige

i think the greatest advantage that the Armaggeddon Black Hornet MKA-3 has over a Corsair K70 is that the MKA-3 uses a standard layout so that you can easily get high quality keysets to replace the stock keycaps. both are using different type of design, Corsair uses exposed switch-top kind of design (where you can see the switch-top from the side) whereas the Armaggeddon the common concealed switch design.

Tesoro and 45g doesn't make sense to me... Tesoro been using MX switches mechanical keyboards while 45g seems to be referring to Topre keyboards. please enlighten me. pictures help

using example of Nerd TKL and Winkeyless B.87:
Nerd's Pros:
easier to use keymapping interface
USD60 include soldering of controller

WKL's Pros:
individual lit bottom RGB
USD52 for soldering of controler / USD72 for soldering of controller & bottom RGB
cheaper acrylic cases

JTK's second groupbuy




skye are you going to organize a GB for this too?

because you might get more value/interest from the Gaming Keyboard thread as the Corsair series are targetting the gaming community. no harm asking here though...

my personal preference would be Ducky because they are using cherry stabilizers that's easier to change keycaps instead of costar stabilizers.

never own one before but can't you DIY the LED on the Enter key?

what is your purpose? if you type a lot then you might want to get a proper typing keyboard like Filco/Ducky/Poker so that you can change out the stock keycaps when the legends start to fade, also better compatibility. if your main purpose of getting a mechanical keyboard is for the bling2 then you should get backlit keyboards like Ducky/Razer/Logitech/Corsair/E-element/Royal Kludge/etc...

if you want LED then get a Ducky (Zero Shine or Shine); avoid gaming brands

i just checked, the ones on sale are all out of stock now. the v2 PCB are different from v1 that the bottom RGB leds are all soldered, whereas v1 only have the first row soldered and you have to solder the second row yourself.

did you try to change the LED yourself or something? even the solder pads fell off

Redscarf are frosted acrylic, not clear la..

i do have some extra ones if you want to collect them from me personally. i don't recommend getting those 3mm ones because they change the typing feeling too much

i think the difference are from the RGB leds rather than the case itself

directly from korea?

I think so... Moreover the ones on winkeyless (with the latest firmware) can be controlled individually this achieving the rainbow effect. Whereas the RSiii are not individually lit, you can only pick one color at a time