geara doga higher than 150.. but its a nice kit... huge... another grunt  suit worth of collection piece in UC Rezel Type C GR.. but its a brick.. something like FA Unicorn

actually i still dream about this brick....just the price vs the runners, not worth it

tempting but it's now 800+, previously i saw it for 750+

Holy....custom paint?

FA ZZ that hand cannon is really tempting, but we all know ZZ gonna come up with 2.0 soon.

IMO if you want to collect 1 line, Z is the best, they have most of the AEUG suits in MG form. The titan suits are just too complex with those MAs.

most of us don't care about Sentinel, it's just a color difference and some minor difference, which doesn't really matter.

im still waiting for RE100 Kshatriya if it ever comes.. try not to stray from 1/100 line

Even the waist is tilting to the side
And the claw...it does not articulate

I tot amazon jp can't ship to Msia?

U r referring to those forwarder?

Ya i've tried to ask b4. It end up it's more expensive than buying locally. The price is cheaper in japan but after included the shipping + handling fee (mostly 30% of the item price). it
s still cheaper to buy locally. Unless u can't find it locally.

Hey guys, starting to get into the MG line and not sure which one to get next? Could anyone recommend a good MG kit that's rm200 or below? Thanks! ^^
P.S. Alrdy hav a MG Unicorn

I like how they keep it simple yet add small details here and there

Btw done kshatriya gonna decals up

I'm having paint crack problem.

1st time i use Nippon Pylox spray cans Matte White. It's Lacquer based.

I almost used up the 1st can so i got a 2nd can, i did 2 coats on the old can, then few hours i spray another coat with the new can, after 3 minutes i notice the areas especially flat & corners have lots of crack, the cracked lines seems have no paint at all on the surface.

I had the same problem before because i sprayed an acrylic layer then lacquer i though it's the problem, but this time it's fresh Lacquer over Lacquer and same issue happened.

Anyone know the cause? The crack is all over the place but somehow small parts are not effected, only parts with deep corners & flat surface suffer.

I don't know, previous batch where i spray lacquer on top of acrylic, same batch, i notice the later ones i sprayed all had cracks, and the time gap is only less than 1 minute. Never had issues with spray cans until i used this Nippon can coz i saw it in Ace Hardware, the Mr.DIY ones are too diluted so can't cover the base color. Regret, i used NOW cans witch cost rm15.xx no issue. I guess pay peanuts get banana.

I sprayed the same way i did before than, only difference is i switch to newer can (should be same stock batch). The older can feels diluted near the bottom. I don't think paint not fully dry is the main issue since i've been doing the same thing. I did spray at good distance.

spray it on bare plastic no issue, issue only coats after, and result is inconsistent, some crack some don't.

I spray just now 3-4pm, don't think it rained. I sprayed on another batch of bare plastic but don't have cracking issue, only happens when there's already painted.

i can understand mixture may be different but still cracking so much something must have gone wrong. because i have done even wetter coats on coats before and i get glossy finish not cracks.

anyway any good cheap way to remove the cracked paints? mr.thinner too expensive to use like this, normal thinner also difficult to wipe and damages the plastic. do lighter fluid work?

PS. The Crack happened on both cans in different situation:

1.3 parts cracked after spraying the lacquer on acrylic coat, rest same method but no crack.
2.cracked after spraying a new can of same brand/type after previous coat.

I then tried mist coat from very far, i guess it's not thick enough to do damage, but i kept quite a distance and the coat wasn't that thick for those cracked. And strange part is some crack some don't and seems the shape of the parts have consistency either that or the paint changed it's characteristic in between.

Praying for 1st quarter release, since there's not much announcement for jan, feb and mar 2016 yet
Hope it get announced before Barbatos get hyped, can see they putting a lot of effort to push this series, the HG line already cover plenty of mech

any reliable brand, the kshatriya stickers is an eye sore to me, but i can't find any white marker to draw those line :/

another question...is it a must to reverse wash sinanju gold trim?
cant be execute with gold sharpie + zippo fluid?

i mean if i use sharpie and then zippo to clean the excess instead of reverse wash, will it be achievable?