how much would it cost ?

RM 10 should do it for the parts...

heck ill build one tomorrow!

i'm tempted to build one
but no idea how

the footprint of tat amplifier can be as small as 3x3cm if done on a PCB

the PCB is not the prob.
its trying to make it small enough to fit in two 3/4" jacks AND a 9V battery.

thats 1/4" jacks. its just a matter of finding the proper size for the enclosure. rough size would be 500 x 500 x 250 mm (WDH), internal dimension that is.

oops, yea 1/4".
but guess you dont like eclipse mints

the measurement for the eclipse mint case is 2x3.8x7.5 cm.

so we should start marketing these eh

its a tight fit in a 2x3.8x7.5 cm enclosure

so what do i actually need to get started?

Soldering iron, solder, maybe a multimeter.

And lots of patience + free time.

as in the parts..

They're listed on the site

R1______________22K 1/4W Resistor

C1______________10µF 25V Electrolytic Capacitor
C2_____________100nF 63V Polyester or Ceramic Capacitor
C3_____________220µF 25V Electrolytic Capacitor

IC1__________TDA7052 Audio power amplifier IC

J1,J2__________6.3mm Stereo Jack sockets (switched)

SPKR___________8 Ohm Loudspeaker (See Notes)

B1________________9V PP3 Battery or
3V Battery (2 x 1.5V AA, AAA Cells in series etc.)

Clip for PP3 Battery or socket for 2 x 1.5V AA or AAA Cells

forgot to check first page

Finally completed one...total time used around 2 hours+

Works nicely except for the fuzz effect which doesn't work - not gonna bother with that since you need to use 3v instead of 9v.

Pictured below with 2x 3.5" chapalang 6w TV speakers



Sounds great on single notes...but sucks on chords due to speaker size/wattage (distorted sound). Probably will swap a Celestion Greenback into it

that doesnt look like its gonna fit in an eclipse mint box

Well the micro-micro 2x 3.5" cab won't fit of course, but the amp will

As for the mini-cab...just stick it into a groupie's handbag


p/s not recommended to use a ciggy box as a casing for the amp as the IC gets quite hot, potential fire hazard

oh btw, plugging the output into another amp will make it go to 21

see, thats why ppl spend more time on it

fuzz effect can be done using 9V and also stuck in a ciggy box.

www.smokeyamps.com

Bah, you should've posted this first instead

Anyone interested in buying? Feel like selling it off...cause went overboard with some purchases.


Upcoming projects would be a fuzz face/tone bender pedal...and something special

lol

you didnt ask, and actually i did post it awhile back.
i also have a similar circuit diagram for it somewhere.