I was thinking of a Thermaltake Blue Orb II.(will it fit into the DS3 mobo?) My budget is quite tight... <rm150.
Please help me guys. Thanks
e6300 air cooling, what's the best cooler to get?
|
|
 Nov 8 2006, 08:18 PM, updated 20y ago
Show posts by this member only | Post
#1
|
 
Junior Member
66 posts Joined: Sep 2006 From: the Darkside 
|
I'm planing to get an e6300 with a DS3 motherboard. What is the best hsf for it?...some people claim that you can overclock these C2D's with just the stock fan...true?..i highly doubt it.
I was thinking of a Thermaltake Blue Orb II.(will it fit into the DS3 mobo?) My budget is quite tight... <rm150. Please help me guys. Thanks |
Quote|
|
|
|
|
Nov 8 2006, 08:29 PM
Show posts by this member only | Post
#2
|
Senior Member
2,865 posts Joined: Jan 2003 
|
Best=Scythe Infinity, Scythe Ninja Plus or Ultra-120
With RM150 budget...hmm..kinda of hard....maybe U top up a little bit for thermaltake Big Typhoon VX... |
|
|
Nov 8 2006, 08:40 PM
Show posts by this member only | Post
#3
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI 
|
|
|
|
Nov 8 2006, 08:45 PM
Show posts by this member only | Post
#4
|
Senior Member
544 posts Joined: Jul 2006 From: DarkForce@LYN.net
|
definately the best bang of ur buck... btw is ur budget <150... cried..
|
|
|
Nov 8 2006, 08:45 PM
Show posts by this member only | Post
#5
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
QUOTE(mikelanding @ Nov 8 2006, 08:29 PM) Best=Scythe Infinity, Scythe Ninja Plus or Ultra-120 How much do they cost?With RM150 budget...hmm..kinda of hard....maybe U top up a little bit for thermaltake Big Typhoon VX...  |
|
|
Nov 8 2006, 08:47 PM
Show posts by this member only | Post
#6
|
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI
|
Maybe go for hyperTX retail at rm125.00
|
|
|
|
|
|
Nov 8 2006, 08:52 PM
Show posts by this member only | Post
#7
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
hyper tx is a goodie out there.. can go google search for it. I think better than ninja or inifinity.
|
|
|
Nov 8 2006, 09:08 PM
Show posts by this member only | Post
#8
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(TheForce @ Nov 8 2006, 08:45 PM) How much do they cost? From elhh82 bulk: Scythe Infinity=Rm200, Scythe Ninja Plus=RM170ULtra-120=not sure..Worldwide shortage..Maybe OP at lowyat plaza got stock.i got mine secondhand around RM200+ |
|
|
Nov 8 2006, 09:16 PM
Show posts by this member only | Post
#9
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
QUOTE(ben3003 @ Nov 8 2006, 08:52 PM) hyper tx is a goodie out there.. can go google search for it. I think better than ninja or inifinity. Yeah...did a search on it...and fromt the reviews it certainly looks good. It even beat the scythe infinity.  at rm125 its a great price.Is it available here already? This post has been edited by TheForce: Nov 8 2006, 09:19 PM |
|
|
Nov 8 2006, 09:23 PM
|
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI
|
QUOTE(TheForce @ Nov 8 2006, 09:16 PM) Yeah...did a search on it...and fromt the reviews it certainly looks good. It even beat the scythe infinity. ALL IT Hypermarket!!! at rm125 its a great price.Is it available here already? |
|
|
Nov 8 2006, 09:33 PM
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
QUOTE(styloe @ Nov 8 2006, 09:23 PM) ALL IT Hypermarket!!! cannot la..too far. I'm staying in JB. Have to look around the shops here...usually very hard to find.  |
|
|
Nov 8 2006, 10:11 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
simply go some bigger computer shop i think can eh. If no u buy from moderno lo.. can ship de.
|
|
|
Nov 8 2006, 10:13 PM
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang 
|
QUOTE(TheForce @ Nov 8 2006, 09:33 PM) cannot la..too far. I'm staying in JB. Have to look around the shops here...usually very hard to find. Just go to S'pore, lots of hot stuffs there  |
|
|
|
|
|
Nov 8 2006, 10:16 PM
|
Junior Member
223 posts Joined: Jan 2003 From: Sban-Spore
|
QUOTE(TheForce @ Nov 8 2006, 09:33 PM) cannot la..too far. I'm staying in JB. Have to look around the shops here...usually very hard to find. Since you stay in JB, u might as well head over to Spore...scythe cooler is quite popular there but u have to make sure your casing can accommodate this infinity or ninja |
|
|
Nov 8 2006, 10:34 PM
|
All Stars
14,909 posts Joined: Jul 2005 
|
Yerp, everyone is right...
Since u live in jb, why don't u go down to SLS in singapore?  More choice, cheaper price [I hope so...  ] |
|
|
Nov 8 2006, 10:36 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
if no passposrt then that's another story..
|
|
|
Nov 8 2006, 10:38 PM
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
Singapore surely can get but all dam expensive la...exchange rate now is 2.3
I think i'll settle for a Hyper TX...if i can find it. Btw, a Centurion 5 should be able to accomodate these coolers, right? |
|
|
Nov 8 2006, 10:43 PM
|
Senior Member
4,561 posts Joined: Jan 2003 From: Penangites
|
The Coolermaster Hyper TX design is almost the same as Thermaltake Silent Tower.....
i believe Silent Tower can perform better than this because there are definitely more fins than the TX and the surface area is bigger This post has been edited by AllnGap: Nov 8 2006, 10:48 PM |
|
|
Nov 8 2006, 10:45 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
tx got the "visor" that can cool other things on the mobo..
|
|
|
Nov 8 2006, 10:47 PM
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
I think u are better off with Scythe Ninja or Infinity since u can get these 2 coolers easily at bulk order, i myself using Ninja, very satisfied with it. The hyper TX won't beat Ninja or Infinity for sure, it's just build to be quiet and an adequate performer
 |
|
|
Nov 8 2006, 10:49 PM
|
|
Senior Member
4,561 posts Joined: Jan 2003 From: Penangites
|
QUOTE(ben3003 @ Nov 8 2006, 10:45 PM) tx got the "visor" that can cool other things on the mobo.. just use a cardboard and you can make one too....it doesnt take any serious modding to make that happen |
|
|
Nov 8 2006, 10:49 PM
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
QUOTE(AllnGap @ Nov 8 2006, 10:43 PM) The Coolermaster Hyper TX design is almost the same as Thermaltake Silent Tower..... How much does the TT Silent Tower cost?i believe Silent Tower can perform better than this because there are definitely more fins than the TX and the surface area is bigger |
|
|
Nov 8 2006, 11:06 PM
|
|
Senior Member
4,561 posts Joined: Jan 2003 From: Penangites
|
QUOTE(TheForce @ Nov 8 2006, 10:49 PM) How much does the TT Silent Tower cost? around RM 110 if you get from Mika.one thing you must know is that the surface area of the Silent Tower is definitely more than the TX for sure. |
|
|
Nov 9 2006, 12:16 AM
|
Senior Member
1,188 posts Joined: Dec 2004
|
Hmmm.I also wan a good cooler.(now thinking about XP-90 or The Eclipse).Cuz Even A Stock My temp is 60c and when OC @ 2.5 GHz .It goes up to 70c
|
|
|
Nov 9 2006, 01:14 AM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 9 2006, 12:16 AM) Hmmm.I also wan a good cooler.(now thinking about XP-90 or The Eclipse).Cuz Even A Stock My temp is 60c and when OC @ 2.5 GHz .It goes up to 70c wat yr budget? |
|
|
Nov 9 2006, 07:45 AM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
QUOTE(Bliz @ Nov 8 2006, 10:47 PM) I think u are better off with Scythe Ninja or Infinity since u can get these 2 coolers easily at bulk order, i myself using Ninja, very satisfied with it. The hyper TX won't beat Ninja or Infinity for sure, it's just build to be quiet and an adequate performer u google for a review and see urself, it beat infinity but not ultra. should be wat bigbruin review. |
|
|
Nov 9 2006, 07:48 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(king99 @ Nov 9 2006, 12:16 AM) Hmmm.I also wan a good cooler.(now thinking about XP-90 or The Eclipse).Cuz Even A Stock My temp is 60c and when OC @ 2.5 GHz .It goes up to 70c Err..Stock temp is 60degress and after oc to 2.5GHz it goes up to 70degress? What kind of processor are u using right now? AMD? [It shouldn't be that hot isn't it?  ] |
|
|
Nov 9 2006, 10:17 AM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(mikelanding @ Nov 9 2006, 01:14 AM) wat yr budget? RM250 is my budget. |
|
|
Nov 9 2006, 10:17 AM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(sHawTY @ Nov 9 2006, 07:48 AM) Err.. I'm using An E6300 now.Stock temp is 60degress and after oc to 2.5GHz it goes up to 70degress? What kind of processor are u using right now? AMD? [It shouldn't be that hot isn't it? ] |
|
|
Nov 9 2006, 11:35 AM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 9 2006, 10:17 AM) RM250 is my budget. Sycthe Infinity or Ultra-120 then...Best Air cooling at the moment...But Ultra-120 might be difficult to find since worldwide no stock. |
|
|
Nov 9 2006, 12:32 PM
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(king99 @ Nov 9 2006, 12:16 AM) Hmmm.I also wan a good cooler.(now thinking about XP-90 or The Eclipse).Cuz Even A Stock My temp is 60c and when OC @ 2.5 GHz .It goes up to 70c Same like mine ler...Stock = 58c OC to 2.03ghz = 68c.. it's only 2.03..urs is 2.5ghz... im using Ninja Raidmax casing.. dono whether the air ventilation ..or wat... So anyone ... Hyper TX or Schythe Infinity for my E6300???  |
|
|
Nov 9 2006, 12:58 PM
|
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
QUOTE(haobeck @ Nov 9 2006, 12:32 PM) Same like mine ler... You guys are running 2.03GHz and 2.5GHz, I'm running at 3.01GHz with stock HSF though, pump up some juice lah Stock = 58c OC to 2.03ghz = 68c.. it's only 2.03..urs is 2.5ghz... im using Ninja Raidmax casing.. dono whether the air ventilation ..or wat... So anyone ... Hyper TX or Schythe Infinity for my E6300??? |
|
|
Nov 9 2006, 01:02 PM
|
All Stars
10,688 posts Joined: Jan 2005
|
u guys running e63 at 2.03GHz and 2.5GHz?? thats too low for well-known most OC'able c2d chip
camon' at stock HSF atleast 2.8/ 2.9Ghz still can what? |
|
|
Nov 9 2006, 01:07 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
BROTHERs... not we don wan la.... but the temp not allowing us to do so...
Scythe Ninja ..Infinity ..Hyper Tx ...so many choices...AS5... After buying ..might full throttle it ... |
|
|
Nov 9 2006, 01:08 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(gengstapo @ Nov 9 2006, 01:02 PM) u guys running e63 at 2.03GHz and 2.5GHz?? thats too low for well-known most OC'able c2d chip Stock HSF 2.03ghz = 68c ...camon' at stock HSF atleast 2.8/ 2.9Ghz still can what? can u imagine 2.8ghz ???? |
|
|
Nov 9 2006, 01:11 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 9 2006, 01:08 PM) Stock HSF 2.03ghz = 68c ... How the hell did you two guys get to 68degrees on stock heatsink?can u imagine 2.8ghz ???? AFAIK, Intel C2D processors are the most cool processor in the world... As what ikan semilang says, some other guys can hit 2.8GHz at stock heatsink... |
|
|
Nov 9 2006, 01:16 PM
|
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
I can hit 3.2GHz at stock voltage and using a stock heatsink though, just that my crappy RAMs ain't stable...
At that point, my full load temp is about 64C only, how the hell they could get such a high temp at only 2.05GHz? |
|
|
Nov 9 2006, 01:18 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
I dono..brother shawty...
B4 OC ..mine was 56c...53c... after OC to 2ghz...went to 67-68c... but the HSF is running well... really don understand...so brother SHAWTY .. which cooler should i go for ... tell u honestly...my GPU idle 77c ....after playing game...88c ... Juz need some precious comments for my CPU & GPU. Soree..i don wanna open new thread..im scared i will get shoot. Please....  Or Raidmax air ventilation is bad for E6300 ?  This post has been edited by haobeck: Nov 9 2006, 01:19 PM |
|
|
Nov 9 2006, 01:21 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(blaxez @ Nov 9 2006, 01:16 PM) I can hit 3.2GHz at stock voltage and using a stock heatsink though, just that my crappy RAMs ain't stable... I dono..i juz set the Clock Speed ... 7 x 290mhz.At that point, my full load temp is about 64C only, how the hell they could get such a high temp at only 2.05GHz? The voltage i let it auto..coz i not dare. the ram multiplier & CIA[to make processor full throttle..cruise..or something] i oso not dare to touch lo.. |
|
|
Nov 9 2006, 01:25 PM
|
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
QUOTE(haobeck @ Nov 9 2006, 01:21 PM) I dono..i juz set the Clock Speed ... 7 x 290mhz. The mobo will increase the voltage itself if you set it at auto. You shouldn't have any problem hitting 2.8GHz at stock voltage (1.3250V). Try locking the voltage at 1.3250 and set your PCI-E frequency at stock (100MHz).The voltage i let it auto..coz i not dare. the ram multiplier & CIA[to make processor full throttle..cruise..or something] i oso not dare to touch lo.. |
|
|
Nov 9 2006, 01:31 PM
|
|
All Stars
10,688 posts Joined: Jan 2005
|
hahaa.. lastime in oso using e63 & OC it using stock HSF at 3.2Ghz
load temp around 70+ while load under primming around 80+ still running strong until i let em' no need worry too much bout temp, as long it didnt reach 100+ like my previous northwood consider ok la dey |
|
|
Nov 9 2006, 01:41 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(blaxez @ Nov 9 2006, 01:25 PM) The mobo will increase the voltage itself if you set it at auto. You shouldn't have any problem hitting 2.8GHz at stock voltage (1.3250V). Try locking the voltage at 1.3250 and set your PCI-E frequency at stock (100MHz). Hmm..still not dare to reach 2.8ghz...coz i really cant imagine 2.0ghz = 68c.. 2.8ghz = 148c........wah...  Brothers here.. i really need Cooling recommendation for my GPU & CPU.. there are too much of varieties ..which confused myself... |
|
|
Nov 9 2006, 01:44 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
if u are capable, buy ninja becos many ppl using it, so assume it is a good cooler out there. Then take some AS5 as thermal paste. Well, ur gc temp is very high, u need to do something to ur casing.
|
|
|
 Nov 9 2006, 02:18 PM
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(haobeck @ Nov 9 2006, 01:41 PM) Hmm..still not dare to reach 2.8ghz... Maybe you not apply the thermal paste correctly or maybe the HSF is not allocate correctly....could be many reason...my AMD Duron @ 1.2 GHz also got 62C during idle...currently using dunno what brand ceramic thermal paste I think...not really sure coz last time bought the mobo, proc, and ram from friends coz i really cant imagine 2.0ghz = 68c.. 2.8ghz = 148c........wah... Brothers here.. i really need Cooling recommendation for my GPU & CPU.. there are too much of varieties ..which confused myself... really need to do something to it...mmm...still waiting for moderno AS stock to come maybe 1 or 2 weeks later... |
|
|
Nov 9 2006, 02:23 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(ben3003 @ Nov 9 2006, 01:44 PM) if u are capable, buy ninja becos many ppl using it, so assume it is a good cooler out there. Then take some AS5 as thermal paste. Well, ur gc temp is very high, u need to do something to ur casing. yeah...GC is really high...im worried everyday...i not dare to play game n logging net so long.. My fren told me to buy Vantec for Graphic Card ..around 60bucks. As for CPU, I capable of buying Ninja Scythe.. Huh? ..still need to apply thermal paste after using schythe...hmm...  |
|
|
Nov 9 2006, 02:25 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(Kataro @ Nov 9 2006, 02:18 PM) Maybe you not apply the thermal paste correctly or maybe the HSF is not allocate correctly....could be many reason...my AMD Duron @ 1.2 GHz also got 62C during idle...currently using dunno what brand ceramic thermal paste I think...not really sure coz last time bought the mobo, proc, and ram from friends nolah...i never ever apply thermal paste b4 ... really need to do something to it...mmm...still waiting for moderno AS stock to come maybe 1 or 2 weeks later... i thought a stock HSF can kao dim everything... i started to worry after seeing my GC & Proc temp hi ... |
|
|
Nov 9 2006, 02:38 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(haobeck @ Nov 9 2006, 02:25 PM) nolah...i never ever apply thermal paste b4 ... The surface of Heat Sink and Processor IHS is not smooth as you seen with your eyes, I mean not 'rata' lar... the thermal paste is use to make both the heat sink surface and processor IHS surface contact better so that can transfer the heat from processor to heat sink better...sorry for cannot explain it well... i thought a stock HSF can kao dim everything... i started to worry after seeing my GC & Proc temp hi ... I think that is the reason why your Processor temp can be that high compare to other...just my 2 cent lor...  |
|
|
Nov 9 2006, 02:58 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
u sure need AS5 to transfer heat between both hsf and ur proc ma, if no use then ><...
|
|
|
Nov 9 2006, 03:00 PM
|
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
QUOTE(Kataro @ Nov 9 2006, 02:38 PM) The surface of Heat Sink and Processor IHS is not smooth as you seen with your eyes, I mean not 'rata' lar... the thermal paste is use to make both the heat sink surface and processor IHS surface contact better so that can transfer the heat from processor to heat sink better...sorry for cannot explain it well... Concave IHS you mean? Just lap it and you'll get about 10C temp difference during load I think that is the reason why your Processor temp can be that high compare to other...just my 2 cent lor... |
|
|
Nov 9 2006, 03:13 PM
|
Senior Member
3,541 posts Joined: Nov 2005 From: Penang
|
Is it laptop just can use the cooler pad to reduce the heat?
|
|
|
Nov 9 2006, 03:14 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(Kataro @ Nov 9 2006, 02:38 PM) The surface of Heat Sink and Processor IHS is not smooth as you seen with your eyes, I mean not 'rata' lar... the thermal paste is use to make both the heat sink surface and processor IHS surface contact better so that can transfer the heat from processor to heat sink better...sorry for cannot explain it well... Oh ? But im using the same mobo like u all...DS3@E6300.. I think that is the reason why your Processor temp can be that high compare to other...just my 2 cent lor... the possibility of having not "rata" is quite low i think.. i wanna try buka my side panel...but the whole rig look not nice...sigh.. Brothers...ok..Scythe Ninja for CPU. How bout GPU?? Please...  Budget rm200. |
|
|
Nov 9 2006, 03:17 PM
|
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
QUOTE(haobeck @ Nov 9 2006, 03:14 PM) Oh ? But im using the same mobo like u all...DS3@E6300.. For GPU, go for zalman ones, you can find it at the bulk section though. Zalman fans are silent too. the possibility of having not "rata" is quite low i think.. i wanna try buka my side panel...but the whole rig look not nice...sigh.. Brothers...ok..Scythe Ninja for CPU. How bout GPU?? Please... Budget rm200.  |
|
|
Nov 9 2006, 04:04 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 9 2006, 03:14 PM) Oh ? But im using the same mobo like u all...DS3@E6300.. If i were you, i won't settle for Scythe Ninja...the possibility of having not "rata" is quite low i think.. i wanna try buka my side panel...but the whole rig look not nice...sigh.. Brothers...ok..Scythe Ninja for CPU. How bout GPU?? Please... Budget rm200. Thermalright Ultra 120, Scythe Infinity and Coolermaster Hyper TX is much much better than Scythe Ninja... And i were to choose, i'll choose Thermalright Ultra 120 from any other choices... Because it's the best of the best... The downside of it, you have to wait for a while as Ultra 120 is on worldwide shortage... |
|
|
Nov 9 2006, 07:13 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(blaxez @ Nov 9 2006, 01:16 PM) I can hit 3.2GHz at stock voltage and using a stock heatsink though, just that my crappy RAMs ain't stable... But mine load a 70c @ TAT ..... IS there something wrong with my e6300 ?At that point, my full load temp is about 64C only, how the hell they could get such a high temp at only 2.05GHz? |
|
|
Nov 9 2006, 07:16 PM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 9 2006, 07:13 PM) But mine load a 70c @ TAT ..... IS there something wrong with my e6300 ? did U Overclock?Are U using stock HSF? If U overclock and using stock HSF, 70C @ TAT for C2D is normal... For me, I OC to 3.2GHz (running 24/7) with Ultra-120, double folding, Max temp around 53C..Before that I used XP-120, max temp around 62C.... This post has been edited by mikelanding: Nov 9 2006, 07:19 PM |
|
|
Nov 9 2006, 07:28 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(mikelanding @ Nov 9 2006, 07:16 PM) did U Overclock? That's your temp in TAT , WOW ! only 62c...Are U using stock HSF? If U overclock and using stock HSF, 70C @ TAT for C2D is normal... For me, I OC to 3.2GHz (running 24/7) with Ultra-120, double folding, Max temp around 53C..Before that I used XP-120, max temp around 62C.... |
|
|
Nov 9 2006, 08:05 PM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 9 2006, 07:28 PM) That's your temp in TAT , WOW ! only 62c... is 53C now...after changed to Ultra-120...  |
|
|
Nov 9 2006, 08:25 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(mikelanding @ Nov 9 2006, 08:05 PM) is 53C now...after changed to Ultra-120... Is it in aircorn room ? Cuz mine romm temp is 30c .....What to say? Hot country la . |
|
|
Nov 9 2006, 08:28 PM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 9 2006, 08:25 PM) Is it in aircorn room ? Cuz mine romm temp is 30c .....What to say? Hot country la . Not in aircon room...i think my room around 28C-29C....not too sure.. |
|
|
Nov 9 2006, 08:56 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(mikelanding @ Nov 9 2006, 08:28 PM) Not in aircon room...i think my room around 28C-29C....not too sure.. Hmmm.Which store in lowyat got sell it la ? If it is hard to find..How's the Eclipse and Thermaltake Big Typhoon punya performance ? |
|
|
Nov 9 2006, 09:03 PM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 9 2006, 08:56 PM) Hmmm.Which store in lowyat got sell it la ? If it is hard to find..How's the Eclipse and Thermaltake Big Typhoon punya performance ? I not sure wer to buy at lowyat..got mine from Forumer here...Alternative will be Sycthe Infinity...elhh82 is selling at Bulk. |
|
|
Nov 9 2006, 09:32 PM
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
I think All IT Hypermall is selling eclipse if not mistaken ... i saw it last two weeks....hopefully the stock is still available...
|
|
|
Nov 9 2006, 09:47 PM
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(mikelanding @ Nov 9 2006, 07:16 PM) did U Overclock? nice tempAre U using stock HSF? If U overclock and using stock HSF, 70C @ TAT for C2D is normal... For me, I OC to 3.2GHz (running 24/7) with Ultra-120, double folding, Max temp around 53C..Before that I used XP-120, max temp around 62C.... measured by wat software? erm..mind to try orthos and see wat is temp? |
|
|
Nov 9 2006, 09:50 PM
|
|
Junior Member
66 posts Joined: Sep 2006 From: the Darkside
|
Wa...already 4 pages...
QUOTE Hmmm.I also wan a good cooler.(now thinking about XP-90 or The Eclipse).Cuz Even A Stock My temp is 60c and when OC @ 2.5 GHz .It goes up to 70c stock e6300 at 60c? wow..thats hot. I thought C2Ds are much more cooler. Btw, what cooling are you using? stock hsf? How much does the Thermalright Ultra-120 cost? When will it be available? |
|
|
Nov 9 2006, 10:22 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(TheForce @ Nov 9 2006, 09:50 PM) Wa...already 4 pages... Stock cooling...stock e6300 at 60c? wow..thats hot. I thought C2Ds are much more cooler. Btw, what cooling are you using? stock hsf? How much does the Thermalright Ultra-120 cost? When will it be available? Can a Scythe Infinity fit to a Gigabyte DS3 mainboard ? |
|
|
Nov 9 2006, 10:25 PM
|
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
QUOTE(king99 @ Nov 9 2006, 10:22 PM) Stock cooling... Of course it does, make sure your casing is wide enough thoughCan a Scythe Infinity fit to a Gigabyte DS3 mainboard ? |
|
|
Nov 9 2006, 10:25 PM
|
Senior Member
5,065 posts Joined: Jan 2003 From: Taman Tun, KL
|
QUOTE(sHawTY @ Nov 9 2006, 04:04 PM) If i were you, i won't settle for Scythe Ninja... Much better is abit of an overstatement really.Thermalright Ultra 120, Scythe Infinity and Coolermaster Hyper TX is much much better than Scythe Ninja... And i were to choose, i'll choose Thermalright Ultra 120 from any other choices... Because it's the best of the best... The downside of it, you have to wait for a while as Ultra 120 is on worldwide shortage... The Ultra-120 is only marginally better and it's rectangular shape means less flexibility in terms of mounting whereas the Ninja is a square which means you get your choice of fan mounting in any mobo regardless of socket orientation. As for performance, the Infinity and HyperTX I daresay only excel under higher airflow conditions. Anywhere from medium to low, the Ninja is a more efficient cooler. And I'm not just saying that because I own one. |
|
|
Nov 9 2006, 11:00 PM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(coolice @ Nov 9 2006, 09:47 PM) nice temp TAT..i did mention..U must had miss it.. measured by wat software? erm..mind to try orthos and see wat is temp? For Orthos, around 57C max.. |
|
|
Nov 10 2006, 10:32 AM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
Hmm..I wanna ask..Put the fan towards the back fan or the PSU ? (in Ninja Infinity)
|
|
|
Nov 10 2006, 10:52 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Should be better put toward the back fan (exhaust mah)...especially if it is a 12cm fan... it will pull out the hot air nicely from the case .....
usually i wont burden my PSU to do the job to reduce the chances of dust accumulating inside.... |
|
|
Nov 10 2006, 10:56 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
@king99..
seems like we've the same fate.. but i think mine is worse... now im not worried my CPU .. coz my GPU can reach 80c without OC. I think the GC not installed to a proper place.. coz underneath Mobo HSF is GC... Juz very close to that. SHould i Install the GC to the most bottom slot ??? |
|
|
Nov 10 2006, 10:59 AM
|
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI
|
QUOTE(Doom @ Nov 10 2006, 10:52 AM) Should be better put toward the back fan (exhaust mah)...especially if it is a 12cm fan... it will pull out the hot air nicely from the case ..... thats true.anyway casing also contribute to high temp.plz make sure when u buy a casing it has a good airflow preferablely 12cm intake and exhaust.i think i have to mod mine originally it has 2*80mm rear bracket aka lousy!!!!!usually i wont burden my PSU to do the job to reduce the chances of dust accumulating inside.... |
|
|
Nov 10 2006, 11:11 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 10 2006, 10:56 AM) @king99.. Hoh?seems like we've the same fate.. but i think mine is worse... now im not worried my CPU .. coz my GPU can reach 80c without OC. I think the GC not installed to a proper place.. coz underneath Mobo HSF is GC... Juz very close to that. SHould i Install the GC to the most bottom slot ??? How can you install the GC in the most bottom slot? You're using PCI-E right? If you're using single PCI-E card, then that means you can only install the GC in the first slot liao... **Unless if u're using PCI graphic card, then that's another story... **PCI and PCI-E is two different slot... |
|
|
Nov 10 2006, 11:23 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(sHawTY @ Nov 10 2006, 11:11 AM) Hoh? Sorry for my noobieness.... How can you install the GC in the most bottom slot? You're using PCI-E right? If you're using single PCI-E card, then that means you can only install the GC in the first slot liao... **Unless if u're using PCI graphic card, then that's another story... **PCI and PCI-E is two different slot... Im using PCI-E card... One more thing im worried is there is a wire stick onto the GC .. Hmm..im working now..If time allow..i will upload pic here. Brother Shawty, When will the Ultra-120 available.. i tak boleh tahan my CPU&GPU suffer like that...kesian! |
|
|
Nov 10 2006, 11:39 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 10 2006, 11:23 AM) Brother Shawty, When will the Ultra-120 available.. I don't know about that...i tak boleh tahan my CPU&GPU suffer like that...kesian! Go ask RLHH about this, he's the only forumer here bulking Thermalright Products... |
|
|
Nov 10 2006, 12:44 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(haobeck @ Nov 10 2006, 10:56 AM) @king99.. Mine too.....Try to make your GC fan 100% if noise is not a problem.seems like we've the same fate.. but i think mine is worse... now im not worried my CPU .. coz my GPU can reach 80c without OC. I think the GC not installed to a proper place.. coz underneath Mobo HSF is GC... Juz very close to that. SHould i Install the GC to the most bottom slot ??? |
|
|
Nov 10 2006, 02:32 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
Im currently using Winfast 7600gs ..no fan ..jus got heatsink only ..
|
|
|
Nov 10 2006, 02:44 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(haobeck @ Nov 10 2006, 02:32 PM) Im currently using Winfast 7600gs ..no fan ..jus got heatsink only .. Try to get a cooler for it lor...Hints: Brother SHawTY got do bulk for cooler o...Zalman alike and cheaper... |
|
|
Nov 10 2006, 05:53 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(Kataro @ Nov 10 2006, 02:44 PM) Try to get a cooler for it lor...Hints: Brother SHawTY got do bulk for cooler o...Zalman alike and cheaper... No need, i'm closing that bulk, as it's not even alive at all... I think it's because of the name, PC Cooler... Not popular such as any other manufacturer such as Zalman, thermaltake, or CoolerMaster...  |
|
|
Nov 10 2006, 06:02 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
Shawty brother...
If not Ultra 120 ..i go for ninja scythe lor ... How bout GPU cooler lor...Zalman cooler how much ? |
|
|
Nov 10 2006, 06:06 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 10 2006, 06:02 PM) Shawty brother... It depend on which type do u want...If not Ultra 120 ..i go for ninja scythe lor ... How bout GPU cooler lor...Zalman cooler how much ? There's a lot of Zalman GPU cooler... VF700 AL VF700 ALCU VF700 CU VF700 CU LED Fatal1ty FSV7 VF900CU VF900CU LED Fatal1ty FSV9 [I'm not sure about this model ]This post has been edited by sHawTY: Nov 10 2006, 06:07 PM |
|
|
Nov 10 2006, 10:33 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Nov 10 2006, 05:53 PM) No need, i'm closing that bulk, as it's not even alive at all... So deska, I didn't notice that you close the bulk already...then you should remove it from your sig there...mislead ler... I think it's because of the name, PC Cooler... Not popular such as any other manufacturer such as Zalman, thermaltake, or CoolerMaster... |
|
|
Nov 13 2006, 09:24 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(Kataro @ Nov 10 2006, 10:33 PM) So deska, I didn't notice that you close the bulk already...then you should remove it from your sig there...mislead ler... It's removed already...But some forumers asked me through PM telling me that i should reopen the bulk again... Should i? |
|
|
Nov 14 2006, 10:41 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Nov 13 2006, 09:24 PM) It's removed already... hmmm...if the total people PM you meet to your MOQ, then maybe you should re-open lor...then can do the bulk liao lor... But some forumers asked me through PM telling me that i should reopen the bulk again... Should i? |
|
|
Nov 14 2006, 10:58 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(Kataro @ Nov 14 2006, 10:41 AM) hmmm...if the total people PM you meet to your MOQ, then maybe you should re-open lor...then can do the bulk liao lor... The problem is, they all just ask me to open the bulk, but when i ask are they interested to buy anything in the bulk, they didn't reply... That's why i'm thinking it over and over again, should i re-open it, or just let it closed like that... |
|
|
Nov 14 2006, 11:49 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Nov 14 2006, 10:58 AM) The problem is, they all just ask me to open the bulk, but when i ask are they interested to buy anything in the bulk, they didn't reply... Then you re-open when got few serious buyer lor... That's why i'm thinking it over and over again, should i re-open it, or just let it closed like that...  |
|
|
Nov 14 2006, 11:28 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
those who concern about the noise of eclipse should download this
i found it in chinese forum..someone review it CM Eclipse 3300RPM CM Eclipse 2000RPM |
|
|
Nov 15 2006, 11:43 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
@Shawty ah...
Which CPU temp should i look for ? My Everest shows 3 temps... 1. CPU temp 2. CPU CORE 1 temp 3. CPU CORE 2 temp my CPU temp is low ..only 43 c...  |
|
|
Nov 15 2006, 11:48 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
CORE 1 temp/CORE 2 temp
this temp almost as same temp of CoreTemp/TAT |
|
|
Nov 15 2006, 11:50 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 15 2006, 11:43 AM) @Shawty ah... U're using a dual core processor right? Which CPU temp should i look for ? My Everest shows 3 temps... 1. CPU temp 2. CPU CORE 1 temp 3. CPU CORE 2 temp my CPU temp is low ..only 43 c... If that's true, then the CPU Core 1 shows the temp for the Core no 1 in you're dual core processor... And the CPU Core 2 shows the temp for the Core no 2 in you're dual core processor... I don't know why there is CPU Temp there... |
|
|
Nov 15 2006, 01:22 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
Huh!!??
Like that huh... anyone using C2D there... what temp i should focus on ??? CPU TEMP ? CPU CORE 1 TEMP ? OR ...CPU CORE2 TEMP ??? |
|
|
Nov 15 2006, 03:05 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 15 2006, 01:22 PM) Huh!!?? Concentrate on the CPU Core 1 temp and the CPU Core 2 Temp... Like that huh... anyone using C2D there... what temp i should focus on ??? CPU TEMP ? CPU CORE 1 TEMP ? OR ...CPU CORE2 TEMP ??? What's the temperature for each of this?: Cpu Core 1 Temp Cpu Core 2 Temp Cpu Temp |
|
|
Nov 15 2006, 11:31 PM
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(sHawTY @ Nov 15 2006, 03:05 PM) Concentrate on the CPU Core 1 temp and the CPU Core 2 Temp... For core 2 duo, use Thermal Analysis Tool What's the temperature for each of this?: Cpu Core 1 Temp Cpu Core 2 Temp Cpu Temp |
|
|
Nov 16 2006, 12:00 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
 @Neoxz Thermal Analysis Tool is a software? Why i cant find from guru3d.com or any other software websites??? This post has been edited by haobeck: Nov 16 2006, 12:01 AM |
|
|
Nov 16 2006, 12:46 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
Hey haobeck...
Becareful with you're GPU Temperature... 78degress... Better becareful mate, or you might have a burnt Graphic Card... |
|
|
Nov 16 2006, 01:22 AM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(haobeck @ Nov 16 2006, 12:00 AM) @Neoxz Thermal Analysis Tool is a software? Why i cant find from guru3d.com or any other software websites??? |
|
|
Nov 16 2006, 08:59 AM
|
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI
|
QUOTE(sHawTY @ Nov 16 2006, 12:46 AM) Hey haobeck... 78c!!!!!!!!!!but then GPU able to withstand more heat but i'll shorten the life tho.my advice change the darn stok heatsink will ya.mine still at 62-68c max.so no need to change save my for a new GPU. Becareful with you're GPU Temperature... 78degress... Better becareful mate, or you might have a burnt Graphic Card... |
|
|
Nov 16 2006, 09:42 AM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(haobeck @ Nov 16 2006, 12:00 AM) @Neoxz Thermal Analysis Tool is a software? Why i cant find from guru3d.com or any other software websites??? |
|
|
Nov 16 2006, 10:17 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(neoxz @ Nov 16 2006, 09:42 AM) You can also lower ur cpu temp by undervolting your processor. Can it be the sensor problem ???Coz i put my finger and feel the Heatsink... But it's not burning my hand... |
|
|
Nov 16 2006, 11:07 AM
|
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI
|
QUOTE(haobeck @ Nov 16 2006, 10:17 AM) Can it be the sensor problem ??? hard to say since if ur sensor is faulthy ur temp will be ridiculously high or low i think Coz i put my finger and feel the Heatsink... But it's not burning my hand...  |
|
|
Nov 16 2006, 12:13 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(haobeck @ Nov 16 2006, 10:17 AM) Can it be the sensor problem ??? That temp will not burn your hand...you will only feel warm or hot....Coz i put my finger and feel the Heatsink... But it's not burning my hand... you can use better cooler and then apply as5 to it...the temp should be lower ... just my opinion... |
|
|
Nov 16 2006, 01:16 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(haobeck @ Nov 16 2006, 10:17 AM) Can it be the sensor problem ??? Another thing which may cause u not feeling the heatsink to be warm is because the contact between ur hsf and ur proc is bad. So, the proc will end up hot and not the hsf.Coz i put my finger and feel the Heatsink... But it's not burning my hand... |
|
|
Nov 16 2006, 03:35 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(neoxz @ Nov 16 2006, 01:16 PM) Another thing which may cause u not feeling the heatsink to be warm is because the contact between ur hsf and ur proc is bad. So, the proc will end up hot and not the hsf. So what should i do to the mobo Heatsink?relocate it ?  |
|
|
Nov 16 2006, 03:59 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
remove, clean the thermal paste, apply another layer of thermal paste then mount ur HSF again...
make sure thermal paste is spread evenly and not to thick nor too thin... carefully but firmly mount ur HSF .... |
|
|
Nov 16 2006, 04:37 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(haobeck @ Nov 16 2006, 03:35 PM) So what should i do to the mobo Heatsink? Just reinstall your heatsink with some thermal paste. Make sure this time that the heatsink sits on properly.relocate it ? |
|
|
Nov 16 2006, 05:12 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(neoxz @ Nov 16 2006, 04:37 PM) Just reinstall your heatsink with some thermal paste. Make sure this time that the heatsink sits on properly. Hi...I juz been to my friend's house to see his C2D setup..Surprisingly his E6300 is cooler then mine by 5-10c..He said he apply a second layer of paste...Should I do that cuz I juz take the heatsink and put into the processer. |
|
|
Nov 16 2006, 05:33 PM
|
Senior Member
908 posts Joined: Jul 2006
|
QUOTE(king99 @ Nov 16 2006, 05:12 PM) Hi...I juz been to my friend's house to see his C2D setup..Surprisingly his E6300 is cooler then mine by 5-10c..He said he apply a second layer of paste...Should I do that cuz I juz take the heatsink and put into the processer. just a few reminder for you, make sure you compare the temp using the same software (suggest TAT), make sure the surrounding temp for yours and your fren's does not deviate too much, make sure his E6300 sits on DS3 not other mobo. as your HSF's ori thermal paste is new so i don think the temp will vary for 5~10. the most is 3~5. |
|
|
Nov 16 2006, 05:47 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(king99 @ Nov 16 2006, 05:12 PM) Hi...I juz been to my friend's house to see his C2D setup..Surprisingly his E6300 is cooler then mine by 5-10c..He said he apply a second layer of paste...Should I do that cuz I juz take the heatsink and put into the processer. Take out the heatsink, clean the old thermal paste, clean it with using Arctic Cleaner, apply a new thermal paste, then resit the heatsink properyly...That should do it, don't overdo the thermal paste... Make it in the middle, not too thick, not too thin... |
|
|
Nov 16 2006, 06:05 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(king99 @ Nov 16 2006, 05:12 PM) Hi...I juz been to my friend's house to see his C2D setup..Surprisingly his E6300 is cooler then mine by 5-10c..He said he apply a second layer of paste...Should I do that cuz I juz take the heatsink and put into the processer. 2nd layer as in mixing thermal paste? |
|
|
Nov 16 2006, 06:50 PM
|
Senior Member
2,733 posts Joined: Aug 2006
|
pls recommend me a heatsink .....budget around 100-200...
I hope i can oc my E6300 extremely with low budget ...haha |
|
|
Nov 16 2006, 06:59 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(Canopies @ Nov 16 2006, 06:50 PM) pls recommend me a heatsink .....budget around 100-200... You can't get a heatsink that can cool you're E6300 in extreme if you're budget is around RM100...I hope i can oc my E6300 extremely with low budget ...haha The best is, max up you're budget to RM200... Then, go get you'reself either this three heatsink: 1) Thermalright Ultra 120 2) Scythe Infinity 3) CoolerMaster Hyper TX CoolerMaster Hyper TX is the cheapest from all those three options... This three heatsink are proven to be 3 of the best 3rd party heatsink in the market... Don't buy it at Lowyat Plaza... You'll be surprised that those heatsink in Lowyat Plaza is more then RM200... Go to bulk section, and find someone that is doing bulk on one of the heatsink... Price in those bulk section is much much cheaper than Lowyat Plaza... |
|
|
Nov 16 2006, 08:51 PM
|
Senior Member
582 posts Joined: Jan 2003
|
QUOTE(king99 @ Nov 16 2006, 05:12 PM) Hi...I juz been to my friend's house to see his C2D setup..Surprisingly his E6300 is cooler then mine by 5-10c..He said he apply a second layer of paste...Should I do that cuz I juz take the heatsink and put into the processer. I compared with TAT...and he uses a cheep mobo...BTW i'll try reinstall the paste.BTW ... Ultra-120 or infinity better if noise is not an issue ! This post has been edited by jun88: Nov 16 2006, 09:03 PM |
|
|
Nov 16 2006, 11:13 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(jun88 @ Nov 16 2006, 08:51 PM) I compared with TAT...and he uses a cheep mobo...BTW i'll try reinstall the paste. If noise is not an issue, then, you can always choose what kind of fan u want to use on u're future heatsink... BTW ... Ultra-120 or infinity better if noise is not an issue ! Let's say, u buy a Scythe Infinity heatsink, then use a Delta Tri Bladed fan, sure it will rock you're pc like hell...  Will cool down you're processor to the extreme, but beware of the noise... U can say now that noise isn't an issue, but once u've feel the sweetness of silence pc, you'll fall in love with it for sure... |
|
|
Nov 16 2006, 11:45 PM
|
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(sHawTY @ Nov 16 2006, 11:13 PM) If noise is not an issue, then, you can always choose what kind of fan u want to use on u're future heatsink... Compare between Ultra-120 and Scythe Infinity on using wat kind of fan, U guys had to be very careful. Ultra-120 can basically use any 12cm fan with different thickness ( 25mm, 32mm, 38mm and so on) whilst scythe infinity can only use 25mm thickness fan. So Shawnty, Delta Tri bladed fan is 32mm, I dont think U can use it on Infinity unless U use other method to tie it up. Get yr fact rite ... Let's say, u buy a Scythe Infinity heatsink, then use a Delta Tri Bladed fan, sure it will rock you're pc like hell... Will cool down you're processor to the extreme, but beware of the noise... U can say now that noise isn't an issue, but once u've feel the sweetness of silence pc, you'll fall in love with it for sure... In term of performance for both HSF, they are about the same. Marginally better toward ultra-120. But Ultra-120 had lighter weight, wider fan choice over infinity. There is no clear winner among them... This post has been edited by mikelanding: Nov 16 2006, 11:47 PM |
|
|
Nov 17 2006, 09:12 AM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(mikelanding @ Nov 16 2006, 11:45 PM) Compare between Ultra-120 and Scythe Infinity on using wat kind of fan, U guys had to be very careful. Ultra-120 can basically use any 12cm fan with different thickness ( 25mm, 32mm, 38mm and so on) whilst scythe infinity can only use 25mm thickness fan. So Shawnty, Delta Tri bladed fan is 32mm, I dont think U can use it on Infinity unless U use other method to tie it up. Get yr fact rite ... Only 25mm fan only la ......( normal 12mm fan ?) . Infinity is about 1kg right...will it fall off my mobo if i don't move it around all the time ?In term of performance for both HSF, they are about the same. Marginally better toward ultra-120. But Ultra-120 had lighter weight, wider fan choice over infinity. There is no clear winner among them... |
|
|
Nov 17 2006, 10:42 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
QUOTE(sHawTY @ Nov 16 2006, 05:47 PM) Take out the heatsink, clean the old thermal paste, clean it with using Arctic Cleaner, apply a new thermal paste, then resit the heatsink properyly... Hmm...is tat easy to take out the heatsink ?That should do it, don't overdo the thermal paste... Make it in the middle, not too thick, not too thin... apply on top of the HS ? or apply inside the HS ?? Soree..noobie learning here. Thanks! |
|
|
Nov 17 2006, 01:58 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(haobeck @ Nov 17 2006, 10:42 AM) Hmm...is tat easy to take out the heatsink ? If ur refering to stock intel heatsink. Yes it is easy. Just refer to your manual.apply on top of the HS ? or apply inside the HS ?? Soree..noobie learning here. Thanks! |
|
|
Nov 17 2006, 02:37 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 17 2006, 10:42 AM) Hmm...is tat easy to take out the heatsink ? Taking out intel stock heatsink is much much easier than what you think... apply on top of the HS ? or apply inside the HS ?? Soree..noobie learning here. Thanks! Apply the thermal paste on you're processor "IHS" <- [Integrated Heatspreader] Hold you're processor in you're hand, you'll see at the top of you're processor, there's a metal part in silver colour, that's what we call as IHS... And that's where you suppose to put a layer of thermal paste, not on the heatsink... |
|
|
Nov 17 2006, 04:17 PM
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(sHawTY @ Nov 17 2006, 02:37 PM) Taking out intel stock heatsink is much much easier than what you think... where u meant the IHS eh? i still didnt get it. Apply the thermal paste on you're processor "IHS" <- [Integrated Heatspreader] Hold you're processor in you're hand, you'll see at the top of you're processor, there's a metal part in silver colour, that's what we call as IHS... And that's where you suppose to put a layer of thermal paste, not on the heatsink...  |
|
|
Nov 17 2006, 05:32 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(basSist @ Nov 17 2006, 04:17 PM) where u meant the IHS eh? i still didnt get it. Can u see that metal part on top of the processor there?The part that has the information of the processor... The one that has some writings of you're processor type, model, clock speed, and the L2 Cache... That's the part that is called IHS... Capiche?  |
|
|
Nov 17 2006, 05:45 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
You can always refer here for application methods with pics
http://www.arcticsilver.com/arctic_silver_instructions.htm |
|
|
Nov 17 2006, 05:55 PM
|
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(sHawTY @ Nov 17 2006, 05:32 PM) Can u see that metal part on top of the processor there? oo got it The part that has the information of the processor... The one that has some writings of you're processor type, model, clock speed, and the L2 Cache... That's the part that is called IHS... Capiche? |
|
|
Nov 20 2006, 11:13 AM
|
|
Senior Member
1,434 posts Joined: May 2006
|
@Shawty
Thanks for all those Informations. But how bout my GPU ...now im very concerned on my Graphic Card. It reached 80c. I tried to lower down the core/memory frequency to 266mhz. The temp is still the same! Should i apply thermal paste? Air cooler or water cooler?? @Neoxz Thanks...i went to the site .. and there is a safety precaution: A modern hi performance CPU can be permanently damaged in less than 10 seconds without proper cooling...!! |
|
|
Nov 20 2006, 02:12 PM
|
|
Senior Member
1,242 posts Joined: Aug 2005 From: Sila Mampir,JB sTaTus:GTX 680 SLI
|
QUOTE(haobeck @ Nov 20 2006, 11:13 AM) @Shawty time to change to a better heatsink IMO.zalman VF 900 shud do the trick for ur GPU and some AS5 Thanks for all those Informations. But how bout my GPU ...now im very concerned on my Graphic Card. It reached 80c. I tried to lower down the core/memory frequency to 266mhz. The temp is still the same! Should i apply thermal paste? Air cooler or water cooler?? @Neoxz Thanks...i went to the site .. and there is a safety precaution: A modern hi performance CPU can be permanently damaged in less than 10 seconds without proper cooling...!! |
|
|
Nov 21 2006, 05:56 PM
|
|
Senior Member
908 posts Joined: Jul 2006
|
Guys, I need a bit help here. I also need a new CPU heatsink for my DS4 + LGA775. Price doesn't matter and I wan the heatsink to be
1) Full copper (yes, including the fin would be perfect) 2) Can do combo cooling like Gigabyte G-Power Pro/Lite can do. (this is important because if u know the design of DS4 it cools the mosfet and chipset down like 2~3 degree.) google alot and so far i only see thermaltake typhoon series with the requirement i wan, but does not look very nice. donno bout the performance too. Hope to get something like G-Power Lite. And I believe the XP-90c does not cool the surrounding also, am i rite Mr. shawty?! |
|
|
Nov 21 2006, 06:56 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(ddww @ Nov 21 2006, 05:56 PM) Guys, I need a bit help here. I also need a new CPU heatsink for my DS4 + LGA775. Price doesn't matter and I wan the heatsink to be Err, what do you mean by that? 1) Full copper (yes, including the fin would be perfect) 2) Can do combo cooling like Gigabyte G-Power Pro/Lite can do. (this is important because if u know the design of DS4 it cools the mosfet and chipset down like 2~3 degree.) google alot and so far i only see thermaltake typhoon series with the requirement i wan, but does not look very nice. donno bout the performance too. Hope to get something like G-Power Lite. And I believe the XP-90c does not cool the surrounding also, am i rite Mr. shawty?! XP90C is just the same with XP120 [except the size] it'll blow the air direct to the motherboard, which means, it'll cool all the thing that is under the fins of the heatsink... |
|
|
Nov 21 2006, 09:27 PM
|
|
Senior Member
908 posts Joined: Jul 2006
|
QUOTE(sHawTY @ Nov 21 2006, 06:56 PM) Err, what do you mean by that? erm, asking for your opinion lor. since you know more bout thermalright. so it does cool the surrouding yer? so basically xp120 and xp90c is the same just tat one is copper and one is not la hor?! you know where to get xp90c? XP90C is just the same with XP120 [except the size] it'll blow the air direct to the motherboard, which means, it'll cool all the thing that is under the fins of the heatsink... |
|
|
Nov 21 2006, 11:18 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(ddww @ Nov 21 2006, 09:27 PM) erm, asking for your opinion lor. since you know more bout thermalright. so it does cool the surrouding yer? so basically xp120 and xp90c is the same just tat one is copper and one is not la hor?! you know where to get xp90c? Thermalright heatsinks that cools the surroundings are:Thermalright SI120 - Full Aluminium Thermalright XP90 - Full Aluminium, Copper Base Thermalright XP90C - Full Copper Thermalright XP120 - Full Aluminium, Copper Base This heatsink's fins face towards the base of the motherboard, so it'll help to cool those parts that's near the heatsink width and length...  Where to get XP90C? Try asking from RLHH... If don't have, then you have to fork some more money to buy it at Overclocking Paradise... |
|
|
Nov 22 2006, 12:09 PM
|
|
Senior Member
1,434 posts Joined: May 2006
|
@Uncle Shawty ah...
I already bought a two fan Vantec and plug into PCI Slot .. Now my GPU = 55c ... ok huh ?? The picture shows my previous GPU temp.. But i still need to know which CPU temp should i focus? CPU temp ? CPU core1 temp ? or ...CPU core 2 temp ? Coz i tangan gatal wan OC my CPU .... |
|
|
Nov 22 2006, 01:47 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(haobeck @ Nov 22 2006, 12:09 PM) @Uncle Shawty ah... You're GPU at 55c?I already bought a two fan Vantec and plug into PCI Slot .. Now my GPU = 55c ... ok huh ?? The picture shows my previous GPU temp.. But i still need to know which CPU temp should i focus? CPU temp ? CPU core1 temp ? or ...CPU core 2 temp ? Coz i tangan gatal wan OC my CPU .... Now that's better than 70degrees About the cpu temps, u have to ask those that uses everest, i can't help you because i've never use Everest before... |
|
|
Nov 30 2006, 07:19 PM
|
Junior Member
239 posts Joined: Oct 2006
|
Read HERE
How come this guy can reach 3.0Ghz++ with stoch HSF only ?? Can anyone explain ? Is it possible ?? |
|
|
Nov 30 2006, 09:57 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Why not if the ambient temperature isn't as hot as in malaysia.....
somemore he is using performance ram rather value ram that most of us would use.... better OC ... besides his temperature seems to be okay mah .... 40+ to 50 ... mine E6600 only 32 idle and 42 load.... |
|
|
Dec 1 2006, 02:42 PM
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Doom @ Nov 30 2006, 09:57 PM) Why not if the ambient temperature isn't as hot as in malaysia..... wah, ur temp just like using athlon. what cooler u use?somemore he is using performance ram rather value ram that most of us would use.... better OC ... besides his temperature seems to be okay mah .... 40+ to 50 ... mine E6600 only 32 idle and 42 load.... |
|
|
Dec 1 2006, 03:48 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
i am using C2D 6600 lah ..... cooler is Thermalright Si-120 but will change to HR-01 tonight after COD ...
|
|
|
Dec 1 2006, 04:50 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Doom @ Dec 1 2006, 03:48 PM) i am using C2D 6600 lah ..... cooler is Thermalright Si-120 but will change to HR-01 tonight after COD ... i know la, u using c2d 6600 like in ur signature, that why i said JUST LIKE USING ATHLON, cause i have a pc using athlon got temp like ur's..btw, u changing to HR-01, what about ur SI-120? This post has been edited by E-J@1: Dec 1 2006, 04:52 PM |
|
|
Dec 1 2006, 11:17 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(E-J@1 @ Dec 1 2006, 04:50 PM) i know la, u using c2d 6600 like in ur signature, that why i said JUST LIKE USING ATHLON, cause i have a pc using athlon got temp like ur's.. Eleh, nak beli SI-120 la tu... btw, u changing to HR-01, what about ur SI-120? Ultra 120 ko tu tak cukup lagi ke bang? |
|
|
Dec 1 2006, 11:33 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(sHawTY @ Dec 1 2006, 11:17 PM) Eleh, nak beli SI-120 la tu... tanya je, tp klu dia nk jual, leh gak Ultra 120 ko tu tak cukup lagi ke bang? FYI, ultra aku dh jual ke sanko, now using xp-90c This post has been edited by E-J@1: Dec 1 2006, 11:33 PM |
|
|
Dec 2 2006, 09:52 PM
|
|
Junior Member
47 posts Joined: Mar 2006
|
Hi ,
What is the best temp for e6300 . any1 plz.. & y the temp. show in SpeedFan & Coretemp is different?? This post has been edited by nbird88: Dec 2 2006, 10:02 PM |
|
|
Dec 2 2006, 11:01 PM
|
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
"what is e6300 oc'ed best temp"? u should state how many it OC.
but overall not above 65c (load) then should be ok d try TAT (intel thermal analysis tool). |
|
|
Dec 2 2006, 11:02 PM
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Depend on how much u OC and now much is ur vCore and vFSB..
if 2.8GHz then about 64-65*C, 3.01GHz or above then >66*C |
|
|
Dec 2 2006, 11:05 PM
|
|
Senior Member
744 posts Joined: Oct 2005 From: Android World
|
QUOTE(yehlai @ Dec 2 2006, 11:02 PM) Depend on how much u OC and now much is ur vCore and vFSB.. not to forget what type of cooling u used if 2.8GHz then about 64-65*C, 3.01GHz or above then >66*C |
|
|
Dec 2 2006, 11:22 PM
|
|
Senior Member
1,188 posts Joined: Dec 2004
|
QUOTE(mruzian @ Dec 2 2006, 11:05 PM) not to forget what type of cooling u used mine....@ 2.8GHZ 70c load in TAT |
|
|
Dec 2 2006, 11:30 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(king99 @ Dec 2 2006, 11:22 PM) mine....@ 2.8GHZ 70c load in TAT thts unussual.. |
|
|
Dec 2 2006, 11:34 PM
|
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(king99 @ Dec 2 2006, 11:22 PM) mine....@ 2.8GHZ 70c load in TAT should be ur thermal paste not really applied well. try to apply it again. My e6400 with stock cooler reached 68c with stock speed bcoz not applying well.This post has been edited by basSist: Dec 2 2006, 11:34 PM |
|
|
Dec 2 2006, 11:41 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
or u chance back to intel HSF to test and see how..
|
|
|
Dec 3 2006, 08:59 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(E-J@1 @ Dec 1 2006, 11:33 PM) tanya je, tp klu dia nk jual, leh gak Ohh.. FYI, ultra aku dh jual ke sanko, now using xp-90c XP-90c? That heatsink should be in the museum of heatsink together with my XP120 liao... |
|
|
Dec 3 2006, 09:24 PM
|
|
Junior Member
47 posts Joined: Mar 2006
|
forgot 2 tell ,
im using stock cooler . now oc till 2.8 . gonna get probably HR-01 . after tat only clock beyond 2.8 . coz still newbie . so dun dare 2 oc 2 much. so i juz 1 2 noe with stock cooler & oc toll 3.01 whats the normal temp.? |
|
|
Dec 3 2006, 09:38 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(sHawTY @ Dec 3 2006, 08:59 PM) Ohh.. yep XP-90c? That heatsink should be in the museum of heatsink together with my XP120 liao... to think an old heatsink like ours still standing till today |
|
|
Dec 3 2006, 09:52 PM
|
|
Junior Member
47 posts Joined: Mar 2006
|
juz tried TAT ,
in 100% load my temp goes 2 71c for core 0 , 68 for core 1 . its like so damn high . using stock cooler. |
|
|
 Dec 4 2006, 06:47 PM
|
Senior Member
4,017 posts Joined: Jun 2006 From: Georgetown, Penang
|
You might wanna consider getting a Thermaltake Blue Orb to bring down those temperatures.
QUOTE(nbird88 @ Dec 3 2006, 09:52 PM) juz tried TAT , in 100% load my temp goes 2 71c for core 0 , 68 for core 1 . its like so damn high . using stock cooler. |
|
|
 Dec 4 2006, 07:33 PM
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
strange... did u test ur OC result...? like Fear test or benchies...? I can go for 2.8 at great stability and temp still 64(measured wif coretemp) on max load... but performance go down...
|
|
|
Dec 4 2006, 09:07 PM
|
|
Junior Member
47 posts Joined: Mar 2006
|
mine is stable no prob now,
when i use OCCT 2 test the temp wont so high. if i use the iTAT put 100% workload then the temp boost up. think of getteing HR-01. |
|
|
Dec 5 2006, 04:44 AM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(E-J@1 @ Dec 3 2006, 09:38 PM) yep Old heatsinks doesn't meant that they don't perform well, it's still good enough if compared to those intel stock heatsink that is loud, noisy, and doesn't perform well... to think an old heatsink like ours still standing till today But one thing for sure, if u're in russia, no need to use 3rd party heatsink liao, just use intel stock heatsink is enough aedi... As the temperature in russia is under freezing temps... Correct me if i'm wrong guys, as that what's i've heard... |
|
|
 Dec 5 2006, 12:11 PM
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(nbird88 @ Dec 4 2006, 10:07 PM) mine is stable no prob now, u got FEAR....? go test and show me us ur result la... or use 3Dmark05/06...when i use OCCT 2 test the temp wont so high. if i use the iTAT put 100% workload then the temp boost up. think of getteing HR-01. |
|
|
Dec 6 2006, 03:14 PM
|
Senior Member
1,464 posts Joined: Dec 2004
|
actually when someone says "my temperature is ## celsius, which one do they refer, cpu temperature or core temperature..
any budget way to clean thermal paste like alchohol? waz the best hsf below RM200 for E6300+965P-DS3@Centurion 5 This post has been edited by deric88: Dec 6 2006, 03:21 PM |
|
|
Dec 6 2006, 03:50 PM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
hmm, my e6300 at 100%(folding@home) core temperature around 65, if use TAT set workload 100%, shoot up to 70C, using stock thermal paste and hsf
btw my clock speed 350x7 stock vcore This post has been edited by deric88: Dec 6 2006, 03:50 PM |
|
|
Dec 6 2006, 04:41 PM
|
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(deric88 @ Dec 6 2006, 03:14 PM) actually when someone says "my temperature is ## celsius, which one do they refer, cpu temperature or core temperature.. if it is c2d then mostly we refer to core temp and not cpu temp. but for other they are refering to cpu temp as other than c2d most of the proc don have the die sensor within the core.any budget way to clean thermal paste like alchohol? waz the best hsf below RM200 for E6300+965P-DS3@Centurion 5 budget way? alcohol wont cost u too much. RM10-RM20 can buy one small bottle d. best hsf below RM200.. TT btvx, Infinity, xp120 etc perhaps. |
|
|
Dec 6 2006, 04:57 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(deric88 @ Dec 6 2006, 03:14 PM) actually when someone says "my temperature is ## celsius, which one do they refer, cpu temperature or core temperature.. Want something cheap and reliable?any budget way to clean thermal paste like alchohol? waz the best hsf below RM200 for E6300+965P-DS3@Centurion 5 Get you'reself a Gigabyte G-Power Pro... |
|
|
Dec 6 2006, 05:09 PM
|
|
Senior Member
3,567 posts Joined: Jan 2003 From: Paradise
|
QUOTE(sHawTY @ Dec 6 2006, 04:57 PM) Want something cheap and reliable? G-Power Pro.. noise level quite high right?Get you'reself a Gigabyte G-Power Pro... |
|
|
Dec 6 2006, 06:29 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(basSist @ Dec 6 2006, 05:09 PM) G-Power Pro.. noise level quite high right? That's if u're putting the fan to run at maximum speed liao...The fan can be adjustable lor... |
|
|
Dec 6 2006, 08:26 PM
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(deric88 @ Dec 6 2006, 03:50 PM) hmm, my e6300 at 100%(folding@home) core temperature around 65, if use TAT set workload 100%, shoot up to 70C, using stock thermal paste and hsf maximum 70C is a bit high, rite? I believe change ur thermal paste will be better, like AS5! btw my clock speed 350x7 stock vcore  |
|
|
Dec 6 2006, 09:57 PM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(RokXIII @ Dec 6 2006, 08:26 PM) maximum 70C is a bit high, rite? I believe change ur thermal paste will be better, like AS5! very susah want get ler, now i lower the vcore to 1.25 and raise fsb 400x7, orthos running 4 hours now, 55C cpu temperature/65C core temperaturein ipoh where can ge AS5.... |
|
|
Dec 6 2006, 10:41 PM
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(deric88 @ Dec 6 2006, 09:57 PM) very susah want get ler, now i lower the vcore to 1.25 and raise fsb 400x7, orthos running 4 hours now, 55C cpu temperature/65C core temperature yik fong dont have meh? In Kiasu ar....in ipoh where can ge AS5.... but u're right, Ipoh so hard to find any computer accessories that u want, so lousy.... Thats y everytime i go back Ipoh, I wont go any computer shop, they selling much more Xpensive than here... |
|
|
Dec 7 2006, 12:11 AM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(RokXIII @ Dec 6 2006, 10:41 PM) yik fong dont have meh? In Kiasu ar.... it's been a long time since my last visit to yik foong......but u're right, Ipoh so hard to find any computer accessories that u want, so lousy.... Thats y everytime i go back Ipoh, I wont go any computer shop, they selling much more Xpensive than here... now i am just waiting for someone to bulk the small tube... |
|
|
Dec 8 2006, 01:05 PM
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(RokXIII @ Dec 6 2006, 09:26 PM) maximum 70C is a bit high, rite? I believe change ur thermal paste will be better, like AS5! weird... i'm using stock as well... my temp never go higher than 67... tat also cuz of weather... and wif my casing closed up... when open the temp go down to 65... on coretemp... |
|
|
Dec 8 2006, 07:08 PM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(t3chn0m4nc3r @ Dec 8 2006, 01:05 PM) weird... i'm using stock as well... my temp never go higher than 67... mine now at 60C 400x7 1.225vcore(100% folding@home) tat also cuz of weather... and wif my casing closed up... when open the temp go down to 65... on coretemp... |
|
|
Dec 9 2006, 12:14 PM
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(deric88 @ Dec 8 2006, 08:08 PM) mine now at 60C 400x7 1.225vcore(100% folding@home) woah...  but u use 7600GT wif fan rite...? easy to OC ur GC... my GC using passive cooling so i dare not OC it... if not i can achieve higher clock wif no probs... my prob is if i go more than 2.5 my FEAR benchy go down... |
|
|
Dec 9 2006, 12:26 PM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(t3chn0m4nc3r @ Dec 9 2006, 12:14 PM) woah... trying to, everytime i enter overclock menu, my screen will go on and off every 2 second..... need enter safe mode and disable driver then install back driver.... but u use 7600GT wif fan rite...? easy to OC ur GC... my GC using passive cooling so i dare not OC it... if not i can achieve higher clock wif no probs... my prob is if i go more than 2.5 my FEAR benchy go down... btw mine is the one normal fan, no zalman fan......(bought too early i guess) This post has been edited by deric88: Dec 9 2006, 12:26 PM |
|
|
Dec 9 2006, 12:46 PM
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(deric88 @ Dec 9 2006, 01:26 PM) trying to, everytime i enter overclock menu, my screen will go on and off every 2 second..... need enter safe mode and disable driver then install back driver.... same here...btw mine is the one normal fan, no zalman fan......(bought too early i guess) the website states mine can do 450/800 but can't do even 450/550... my stock is 450/400... which is y i wish they produce a ROM in the GC which allows us to OC in the GC BIOS... ur GC stock already good enough to catch up wif ur CPU i think... if not ur practical performance will go down also gua...  |
|
|
Dec 10 2006, 12:20 AM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(t3chn0m4nc3r @ Dec 9 2006, 12:46 PM) same here... maybe tht will be ati's secret project to kill NV which is taking them so long?the website states mine can do 450/800 but can't do even 450/550... my stock is 450/400... which is y i wish they produce a ROM in the GC which allows us to OC in the GC BIOS... ur GC stock already good enough to catch up wif ur CPU i think... if not ur practical performance will go down also gua... |
|
|
Dec 10 2006, 12:25 AM
|
Senior Member
817 posts Joined: Nov 2006 From: Kuala Lumpur
|
btw guys... where to get themalright ultra 120 cpu heatsink?
|
|
|
Dec 10 2006, 01:45 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(DiCalto @ Dec 10 2006, 12:25 AM) btw guys... where to get themalright ultra 120 cpu heatsink? onli way to get it from sidewinder, an online retailer, they do postage to malaysia....if u wanna get it here, have to wait for forumer to do a bulk on it... |
|
|
Dec 10 2006, 12:25 PM
|
|
Senior Member
1,464 posts Joined: Dec 2004
|
i heard that ultra 120 product shortage in malaysia
|
|
|
Dec 10 2006, 03:43 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(deric88 @ Dec 10 2006, 12:25 PM) i heard that ultra 120 product shortage in malaysia not shortage.... takde langsung |
|
|
Dec 11 2006, 12:29 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
yah .. being searching around but no luck ....
|
|
|
Dec 11 2006, 03:50 AM
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
ANyone here made a review on the Cooler Master Hyper TX yet? Would really love to read one.
|
|
|
Dec 11 2006, 09:28 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(deric88 @ Dec 10 2006, 12:25 PM) i heard that ultra 120 product shortage in malaysia Not just in malaysia, it's a worldwide shortage...Seems like the Ultra 120 is the most "laris" heatsink on the market right now... QUOTE(vassalle @ Dec 11 2006, 03:50 AM) ANyone here made a review on the Cooler Master Hyper TX yet? Would really love to read one. Google up in Yahoo, you'll see tons of reviews on that heatsink... |
|
|
Dec 12 2006, 02:02 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
3d rocket 2 or ninja better for e6300? I wan to buy a cooler which is easier to install.. last time i install termaltake bettle nearly crack the mobo..
|
|
|
Dec 12 2006, 05:22 PM
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(ben3003 @ Dec 12 2006, 02:02 PM) 3d rocket 2 or ninja better for e6300? I wan to buy a cooler which is easier to install.. last time i install termaltake bettle nearly crack the mobo.. better get Scythe Infinity, perform better than Ninja and 3D Rocket 2. |
|
|
Dec 12 2006, 10:19 PM
|
|
All Stars
14,909 posts Joined: Jul 2005
|
QUOTE(irangan @ Dec 12 2006, 05:22 PM) better get Scythe Infinity, perform better than Ninja and 3D Rocket 2. I've seen somewhere that the 3D Rocket 2 performs quite well like the infinity and Ultra 120 Will seek for some review and post it here later on |
|
|
Dec 13 2006, 12:27 AM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
kk.. currently waiting for it. I am going to get my rig done around january.
|
|
|
Feb 19 2008, 11:02 AM
|
Senior Member
2,277 posts Joined: Sep 2007 From: It's a tarp
|
Hi all i have these:
E6300 Abit IP35-E 2x 1gb Kingston DDR2 667mhz Capalang 500W PSU. teach me overclock it to at least 2.4ghz? With stock HSF possible? |
|
|
Feb 20 2008, 08:20 AM
|
Senior Member
2,275 posts Joined: Jan 2007 From: 192.168.200.45
|
bro follow this guide frm bro kmarc
CLICK ME!! This post has been edited by Bigblock: Feb 20 2008, 08:20 AM |
|
|
Feb 20 2008, 10:34 AM
|
|
Senior Member
2,277 posts Joined: Sep 2007 From: It's a tarp
|
huh? theres no E6300 inside, isit fine following other proc setting o.O
|
|
|
Feb 20 2008, 12:22 PM
|
|
Senior Member
563 posts Joined: Jan 2008
|
QUOTE(KenDiriwan @ Feb 20 2008, 10:34 AM) huh? theres no E6300 inside, isit fine following other proc setting o.O Yes. They only vary by the number of multipliers. |
|
|
Feb 20 2008, 08:37 PM
|
Senior Member
3,119 posts Joined: May 2007 From: Home
|
well a conroe is a conroe, a stepping is a stepping. Doesnt vary much.
|
| Change to: |  0.0426sec
 0.57
 5 queries
 GZIP Disabled
Time is now: 20th December 2025 - 10:18 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.