If i did not buy a Xiaomi i would not care about those charging stuff anyway since i've always been using Nokia. Later learned why the phone heats up when charging with different methods. Those cables only play marginal difference. The big difference in the cable is, if it only does charging or data + charging. I don't even want to delve into the MAh counts. I just ask everyone to look at their phone battery charge Amp and Adapter Amp and they will know why. If they cannot see how it is related, then i nothing to say liao.

buy online rm8 je

Same story.. Digging same thing once hv xiao mi stuff

Same story.. Digging same thing once hv xiao mi stuff
Former Nokia user too

Ehh netmatrix??
Pc techies, but use some almost kaput gadget mehh?
Been on the same shoe b4

what if i have 2amp power supply, a phone capable receiving that , but cable that can only deliver around 500mili amp or less?

This post has been edited by pikacu: Jun 23 2015, 01:02 PM

if ur power supply give 2amp,.. and ur cable can't stand 2amp,.. it's will burned,.. it'll not give u 500 mili amp...

perhaps that's why my older cable stopped working after some times, thanks

nope,.. if it's burned, it won't give u any charge at all,..

BTW i suspect, all those death when charging phone is becos of thick cable instead of thin cable.. cos faulty power supply wud safely burn the wire of thin cable,... (which act as safety trip switch)

I bought 4 remax dream cables from this guy:
http://www.lelong.com.my/remax-fast-chargi...7-01-Sale-I.htm

Tested all remax cables can charge only 0.5A or less...sucks big time vs my original samsung cables.

This post has been edited by idq2k3: Dec 21 2015, 01:25 AM

I bought alot of cables from this reseller and so far ok. Which cable did you buy?

Also your adapter can output more then 1A?

I buy remax wire mesh cable for rm40. Charge faster than ori samsung cable. Dem nais

But after upgrade to lolipop, that cable charge at 0.5a je. In fact a lot other cable charging at 0.5a. It is now detect as USB and not AC. Thats why charge so slow.

Stupid note 3 lolipop upgrade. That that rm40 remax cable use to charge my rm50 pineng powerbank.

ko gi kedai phone cari charger 2.0a punya. sejam dah penuh. remix ni semua karut je lebih

ayam bought a few of these

http://www.11street.my/productdetail/genui...k-charge-861141

very gooding. Quick Charge compatible too

You talk nonsense because you lack knowledge.

There are 3 main factors that determine the speed for standard charging :
1) The charger's current delivery capability.
2) The connecting cable resistance & voltage drop.
3) The device current draw capability.

Cable is just one part of the equation whether fast charging works or not.
All 3 must works together at the same time to achieve fast charging.

Plugging in a 2.0A charger to my cheap 0.5A draw smartphone will still charge it in 4 hours, not 1 hour as you claimed regardless whether I use a fast charging cable or not.

Do your research & experiments before saying everything else is nonsense.

did u know if u charge phone in aeroplane mode. u phone will QUICK charging.?

I dont believe in this 'fast charge cable' unless they show me an amplifier inside the cable itself. It is all based on power source, 1.0A 2.1A. Now if the cable kenot tahan the power sure burn one.

Maybe 'fast charging' cable means it can handle higher amounts of loads hence it is used for 'fast charging' which is determined by the source.

My statement is open for constructive criticism.

Quicker by 4 minutes ?
You call this 4 minutes saved is QUICK charging ?

http://www.verizonwireless.com/news/articl...ge-a-phone.html

Airplane mode will disable the power drained by the device when maintaining connectivity.
4 minutes saved is insignificant.


I always charged my devices when they are turned off.
This will eliminate the parasitic loads if they are still powered on.

http://batteryuniversity.com/learn/article...m_ion_batteries
Battery manufacturers advise against parasitic loads while charging because it induces mini-cycles

A portable device should be turned off during charge. This allows the battery to reach the set voltage threshold and current saturation point unhindered. A parasitic load confuses the charger by depressing the battery voltage and preventing the current in the saturation stage to drop low by drawing a leakage current. A battery may be fully charged, but the prevailing conditions will prompt a continued charge, causing stress.

This post has been edited by Hattori: Dec 30 2015, 09:05 AM

common sense right. u lubang 5inch u cucuk a 2inch stick sure can go in.

u lubang 5inch u cukuk 4inch then of course

many factors involved here
1. charger amperage
2. cable transfer amperage level
3. cable fast charging capability
4. phone charging capacity


like my mi3, max input is 2A, when i use my own fast charging cable with fat lines only can get around 1.8Amps. (my charger size is 5A)

1. if your phone detect is normal USB cable, then is 0.5A
2. if your phone max can charge at 1A, then if you use 2A charger and 2A cable, you will end up with 1A only.
3. fast charging is just a difference with the pinout where they shorted one of the data pin, your phone will detect this difference and allow more juice than 0.5A to flow in.
4. some of fast charging cable copper core is very thin, so can support around 1A only. good cables is thick on the core, with shorted pins to enable fast charging, and braided to prevent snapping when bent

This post has been edited by AllnGap: Dec 30 2015, 09:13 AM

pandai ini common sense.

your charger can be 2amps but cable must be 2amps to only fully utlized it. so it takes 3 hours to charge full

but if charger 2amps but cable 1amps then it will charge and 1amps.

download galaxy current tool to test the cable charging amps.